similar to: ntp Server and Zultys 4X4

Hi All, I am investigating the deployment of VoIP/* in Eastern European areas where there is no PSTN infrastructure. As you can understand DSL/Cable connections are a dream. The only option is satellite. Does anyone know of any satellite providers that have low enough/acceptable delays for VoIP? Thanks, Yiannis.

Before I start, I just want to say this is not necessarily a problem with ASTCC, but may be a problem the way I have set up ASTCC (and possibly the way others have set it up as well). The issue is that ASTCC tries to match the pattern *anywhere* in the called number, not necessarily only at the beginning. I have set up ASTCC Routes like this: 1800 Tollfree Trunk1 0 0 100 1416 Canada Trunk2 0 0

Hi All, A friend has asked me to get a new Zultys 4x5 working with his * server. I've been over the web gui but don't see where all the registration info gets entered in the phone. Is there someone on-list who has Zultys phones and can advise me as to their setup? The manufacturers docs are useless. Thanks, Michael -- Michael Graves mgraves@pixelpower.com Sr.

qualify= and mailbox= do not work with the realtime configuration engine. It doesn't matter if you specify them in the database, the thread that handles them will never look at the peers you have defined in the database, only the ones defined in iax.conf. --------------------------- Thank you. Will this be a permanent situation, or be resolved in future releases? ===== Jason Goecke

Is anyone successfully using one of these with Asterisk? I cannot get the phone to register, this message keeps coming up on the Asterisk console: Jul 29 14:11:39 NOTICE[1125350192]: chan_sip.c:7323 handle_request: Registration from '"000BEA801CA6" <sip:000BEA801CA6@hcs.net:5060>' failed for '204.194.36.138' The telephone LCD says "SIP registation

Does anyone on-list use the Zultys 4x4 or 4x5 ip phones? I'd like to hear some opinion before I buy a few. I'm especially interested in the PSTN interface on the 4x5. Does it relay to * for VM when an incomming call is not answered by the phone? Thanks, Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist

I'm preparing to roll out Asterisk for the voicemail portion of my VOIP network. This week I downloaded a fresh version from CVS of Asterisk and installed the following MySQL 4.1.7 RPMs directly from Mysql.org For some reason after I enable MySQL for CDR and Voicemail in the cdr_mysql.conf and voicemail.conf I don't get any MySQL functionality at all. It almost seems as though MySQL

Hi all, I bought a couple phones for really cheap just for a simple solution. I'm trying to get a few 7910 to work with *. I'm just not sure how to get them to work. The 7910 just sits there "configuring IP" Here is a copy of my skinny.conf. the extensions.conf is default. I just want to bring the system up in default before a start making changes. Do I need to make

Anyone had experience with this phone? The interesting features that caught my eye were the RTP encryption, speaker "pager", and built in 4-port ethernet switch. Of course, RTP encryption doesn't exist in * yet, but it might be interesting (I've had people ask about it, but I don't know how serious they are about needing it.) http://www.zip4x4.com/summary_ZIP4x4.htm

Hi peoples Can anyone tell me if the Zultys Zip 4x5 supports iax protocols or if they have configured one before for iax. If you have a sample config file that would be great. Any assistance would be nice Scott -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050811/6c243053/attachment.htm

I'm having trouble with the Realtime setup. I've followed the instructions on voip-info using odbc but I get this message during asterisk boot: Parsing '/etc/asterisk/sip.conf': Not found (No such file or directory) Dec 14 16:11:37 NOTICE[8868]: chan_sip.c:8462 reload_config: Unable to load config sip.conf, SIP disabled == Registered channel type 'SIP' (Session

Hi all, I have found the solution for getting Zultys handsets to accept paging messages. We need an app to send RTP packets with a codec of G711U to send to port 3771 on multicast dest of 224.0.0.1. There isn't any need to use SDP or SCCP packets to inform the phone to "listen" for those packets, they do it by default. Finally we may be able to get a solution going for Zultys

I set up the pilot number to voicemail to be 777. When a user calls 777 the voicemail answers and asks for mailbox, then password. Is there a way for the Voicemail to read what extension they are calling from and just ask for the password? I have a person complaining because they have to enter their mailbox number every time they check their voicemail and the "old" pbx didn't ask

Hi All, Does anyone on-list have experience with the Zultys 4x4 and 4x5 phones with AES encryption? Does this work well with *? I imagine that it would work as long as * doesn't have to decode the stream. What are the implications for calls going to voicemail or MeetMe? I'd pondering installing the 4x5, especially if Zultys can make the on-board FXO port available to * as well as a

Has anyone tried out the Linksys RT31P2 with Asterisk? Seems like a really great solution for remote users... even supports QoS. Too bad it doesn't also have VPN functionality built in. Here's a link to the product: http://www.linksys.com/products/product.asp?prid=652&scid=29 -Ron -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm trying to get a Zultys Zip 2 phone working with Asterisk. The phone seems to be failing registration (see sip debug output below). However, I can place calls TO the Zip2 from other SIP phones (Grandstream BT-101, Xten X-Lite, and eStara Softphone) and from Nortel PBX extensions coming in to Asterisk over a PRI T1. The problem is that I cannot dial any extensions from the Zip 2. Any

I am trying to get a new Asterisk installation running using a Zultys ZIP2 phone and a Uniden 200 phone. I have the system working reasonably well (although probably not optimal) except for a couple of items. First, I can't get the voice mail message light to work on the Zultys phone but it works just fine on the Uniden phone. Second, the time presented on the Uniden UIP200 phone is 1 hour

I've got a Zultys WIP2 and Zultys 2x2 both of which support encryption. I have patched my asterisk with srtp (srtp.sourceforce.net) as well as with the patch found at http://bugs.digium.com/view.php?id=5413. I'm trying to utilizing the encryption feature of the two Zultys phones to create an encrypted call, but am having extreme difficulty. I keep getting the following error message

Does anyone on-list have any advice about the version 2.2 firmware for the Zultys 4x5 phone? It has a new "gateway" mode that is supposed to direct calls on the analogue line to the PBX for VM, etc. Zultys has not yet presented any docs, and the keep refering me to the reseller who doesn't know anything about t at all. Thanks, Michael -- Michael Graves

I have my first Zultys here but can't seem to get to first base. Does anyone have a basic configuration file they might share? Mine is a Zip 2+. If I understand the Zultys User Manual, the default passwd should be a null string--but the web interface isn't accepting that (nor 'admin' nor a couple others). Anyone know what the default passwd actually is? Thanks for any and all