similar to: spa 2000 phones do not ring

I have a Sipura SPA2000 2 line SIP FXS box with line 1 on port 5060 and line 2 on 5061. The SPA2000 is on IP address 192.168.17.6, and the asterisk box is on 102.168.17.2. Both SPA2000 ports(5060 and 5061) share the same IP address. Every minute I repeatedly get the following output: SIP Debugging Enabled 10 headers, 0 lines Reliably Transmitting: OPTIONS sip:192.168.17.6 SIP/2.0 Via:

Been having a problem with my two Sipura 2000's dropping calls from the SPA-2000 side. Seems the calls are dropped right before the "Next Registration" time. Calls drop about ever 60 minutes or so. I have dialed from one port to the other and let it sit. After about 60 minutes or so the calls get dropped. System details are below Asterisk ver. CVS-HEAD-11/27/04-23:42:45 RHEL 3

I'm trying out a Linksys PAP2T-NA. Calling out works great, no problems there. Calling in, though, the phone doesn't ring. Caller ID shows up, I can pick up the phone, and the call is connected, but no ring. I've tried it on two analog phones, same behavior. Suggestions? Asterisk SVN-branch-1.2-r31555. - James Moore

aa <- (structure(list(X.0.85 = c(-1.02, -1.17, -1.29, -1.39, -1.46, -1.5, -1.52, -1.5, -1.46, -1.39, -1.3, -1.19, -1.07, -0.93, -0.79, -0.65, -0.5, -0.36, -0.22, -0.08, 0.05, 0.18, 0.3, 0.41, 0.52, 0.62, 0.72, 0.81, 0.89, 0.98, 1.05, 1.13, 1.19, 1.25, 1.29, 1.31, 1.31, 1.29, 1.24, 1.16, 1.06, 0.93, 0.77, 0.58, 0.38, 0.16, -0.07, -0.31, -0.89, -1.05, -1.19, -1.31, -1.41, -1.47, -1.51, -1.51,

Hello, Listers I'm trying to run blloean logit model with R. My code is: > library(boolean) > library(foreign) > pr <- read.dta ("prcore1.dta") > bp <- boolprep ("(a&b)|c", "cwt", a="O1", b="t", c="DM2 > + ah + md + con + n3 + rel + slo + pyrs > + sp1 + sp2 + spl3") > answer <- boolean (bp, link =

Full_Name: Maura Monville Version: 2.8 OS: Mac OS/X 10.5 Submission from: (NULL) (87.4.122.234) Here is the code that causes wavCWTPeaks error aats <- create.signalSeries(aa, pos=list(from=0.0, by=0.033)) aa.cwt <- wavCWT(aats) x11 (width=10,height=12) plot (aats,main=paste(insig," Cycle: ",j,sep="")) aa.maxtree <- wavCWTTree (aa.cwt,

The attachment is my dataset: 1.ccc.shp (the original data) 2.ccc.gwt, which is computed by Geoda; Introduction to the variables in my data: ID: key variable; N_LATITUDE: latitude measured by GPS; E_LONGITUD: longitude measured by GPS; LIVES: attribute data I get the different result of Moran's between ARCGIS and Geoda, R, why? ARCGIS:spatial statistics tools:spatial

I cannot understand the following error printed out when I try to get the extrema of my time series. I would appreciate some suggestion as I really cannot interpret the error. I might not be using a proper set of parameters in calling such functions. I am learning by doing ... > aa.peak <- wavCWTPeaks (aa.tree) Error in `row.names<-.data.frame`(`*tmp*`, value = c("1",

On 30.07.2015 10:49, Nux! wrote: > Then you should definitely submit a bug with redhat about this, seems like a serious one. Ok, done: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 P.S. As I can see - bugzilla.redhat.com for oVirt Product does not contain qemu-kvm-ev Component at all - looks like this is yet another bug - in the bugzilla settings. But I can't find how to report

Hello, All! Is it possible to use binary packages build from http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7/SRPMS/qemu-kvm-ev-2.1.2-23.el7_1.3.1.src.rpm with plain CentOS 7.1 and use all other packages from CentOS (libvirt, virt-manager, etc) Is it have reasons, if I not use live migrations and qcow2 snapshots? (instead use zfs, zvols and zfs snapshots for VM disks online backups) Is using

Dear, I am using "cwt "function from Rwave package to perform Morlet wavelet analysis. d1<-c(1.31673209591515, -0.171333455797346, -1.67618546079420, -0.931604651010362, -0.954614183224057, -1.19821794547758, 0.516096363353144, -0.0432811977638559, 0.737764943619919, 0.438046629673177, -0.208607167908743, -0.3091308821262, -1.42473112931594, 0.234125312118165, -0.307047554490597,

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

On 29.07.2015 21:34, Nux! wrote: > Yes, you can. > In fact you can use the binaries from the ovirt repo itself, no need to rebuild. Thank you! In fact - I can't use raw binaries from the ovirt repo itself, because these qemu-kvm binaries contains one bug, which is already fixed in Debian: If you want to migrate Windows from hardware node to VM using CentOS 7.1 on hardware node and

On 31.07.2015 10:19, Sandro Bonazzola wrote: >> https://bugzilla.redhat.com/show_bug.cgi?id=1248758 > Have you checked 3.5.4 RC or CentOS Virt SIG[2] > to see if the bug has been fixed in latest qemu-kvm-ev ? > > [1] http://resources.ovirt.org/pub/ovirt-3.5-pre/ > [2] http://cbs.centos.org/repos/virt7-kvm-common-testing/x86_64/os/ Patch mjt-set-oem-in-rsdt-like-slic.diff

Hi all, How can I add some options to qemu command line when a kvm guest starts up from libvirtd?? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20150818/e962c559/attachment-0006.html>

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

Hello All. 1. I'm at first install ASTERISK (debian sid), and try to to make call by Kphone 3.1. For all my attempt I find in logs: Apr 18 16:05:17 NOTICE[81926]: File pbx.c, Line 999 (pbx_extension_helper): Cannot find extension context 'default' I check in extention.conf [default] section exist and has pattern which I send (for example 's', '1234'). In CLI I try to

Hello We have setup a doorbell which has an inbuilt analog phone which is connected to our Asterisk via a SPA2000 ATA. The problem we are getting is that when a caller presses the buzzer it is taking two or more minutes to finally call the reception phone. In the SPA2000 I have set dtmfmode to be inband. I notice that with the asterisk you dial a number and then it waits for a timeout

Hey guys, I am posting this again....because i didnt get any replay. Please I am doing my thesis and I am stack installing a guest machine from Yocto, a unix like machine. It boots successfully on the same host without xen. thank you again, Nas On Tue, Jun 4, 2013 at 5:37 PM, nesredin mahmud <nasmitlinux@gmail.com>wrote: > hello everyone, > > I am experiencing DomU booting