similar to: Asterisk for voicemail -> C2611XM, 7940 & 7960 phones

Hello, I've been using * for quite a while using AVM C4 card and a few Grandstream Budgetone 102 hard phones plus couple of HandyTone 286. Echo is a big problem. I am getting used to it, but some users complain. Anyone has experience w/ regards to echo comparing the AVM C4 with two HFC-cards? Before shelling out time and money, maybe someone else already has done so, and could tell me if

hi i am experiencing some problems with the configuration of an BN8S0 Beronet card. I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel 2.6.16.18 and the enabled the following: <*> ISDN support x x Old ISDN4Linux ---> x x --- CAPI subsystem x x <M> CAPI2.0 support x x [*] Verbose reason code reporting (kernel size +=7K) x x [*]

Hello, I'm having trouble working out how to send DTMF tones to an external IVR. My system has an analog phone connected to a TDM400P card, a SIP software phone (Zultys LIPZ4) and is connected to a BRI in Australia with a NETjet-S card. I'm using ISDN4Linux and a 2.4.25 kernel patched with the ISDN audio patch from Traverse (which allows the card to do voice). DTMF works fine between

Dear All: I am pretty new to xen-devel, please correct me in the following. Assume we have the following terms GPT: guest page table SPT: shadow page table (Question a) When guest OS is running, is it always using SPT for address translation? If it is the case, how does guest OS refer and modify its own GPT content? It seems that there is a page table entry in SPT for the GPT page. (Question

What types of ISDN BRI cards work well in Europe (Guadeloupe, Martinique and France) ? For example: AVM C2 or AVM C4 or eicon Diva server 4 BRI? Any others? Which driver is appropriate? Ray Burkholder ray@oneunified.net http://www.oneunified.net 704 576 5101 -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. -------------- next part

You may get more response by posting this question on the R news list: r-help at stat.math.ethz.ch As for using R on Solaris, its easy to compile, looks and acts almost exactly like S-Plus 3.X. I use R on Sparc Solaris every day. -Greg > -----Original Message----- > From: Stafford Phillip-APS095 [mailto:phillip.stafford at motorola.com] > Sent: Monday, April 01, 2002 12:11 PM > To:

Hi, I am having some trouble with ISDN Dialout. Using a Netjet-s PCI Card. When in Minicom, the only way I can dialout is if i issue ATS18=1 First. Otherwise I get a BUSY message. So thats fine. But when I dialout from asterisk, I get an immediate hangup, so my guess is that asterisk is not issuing ATS18=1 to the ttyI device. Here are my configs, any input would be greatly appriciated.

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Hi list! I'm currently using a HFC-S card for my ISDN BRI line with bristuff. The instability is driving me crazy however. I'm having continuous problems where inbound calls will not work after some time of operation (the number then appears as not in use to the caller) or also outbound calls do not work. The solution is to unload the modules, stop asterisk, re-load the modules and

Hello asterisk-users, I recently set up an asterisk server using Debian Sarge. I also added an ISDN card (AVM FritzCard PCI) to the machine. I built amd installed a new kernel (2.6.15.1) with modular support for the CAPI stuff and also integrated the FritzCard driver available from AVM. capiinfo succeeds in correctly showing the ISDN card. When talking from one PC to another via SIP, everything

Hello all, I was wondering if anybody knows where one might obtain a PCI ISDN card supporting a single BRI for use with Asterisk in Australia (and using something like chan_capi). Because of the Isdn4Linux DTMF issue, I don't want one of those cards. I've already spent too much time messing about with my current card. I'm after something like the AVM Fritz! cards. I found one place

Hello! Is there a way to use AVM Fritz!PCI as a ZAP interface and have it configured for ZAP channels? Thanx in advance! Roland Zagler mailto:r.zagler@fog.at @fog smart partners

<P>Hi List,<BR>is it possible to connect an existing telefon system with a stanard AVM ISDN card to the telco?</P> <P>&nbsp;</P> <P>[ISDN from Telecom supplier] ---- [Aterisk Box] ----- [ existing telephon installation]</P> <P>&nbsp;</P> <P>kind regards,<BR>Patrick</P>

Hello! Im very new to asterisk. At first i will need it to send wave files to an specified number over an isdn card. What will i need to do this? Which modules i need for this job and how to setup the asterisk server? I know its complicated question but i dont know how to set it up. Have read some how-to?s on voip-info.org like asterisk and isdn4linux but dont see the right way to get it

Hello Folks, I looking to migrate a pbx from one server to another. The original server has this ISDN card: ? 00:00.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) ? The new server: 00:00.0 I2O: Digital Equipment Corporation StrongARM DC21285 (rev 04) << AVM ISDN Controller C4 Now I'm not fully aware of both's cards functions since the manuals

Hi, I have a Fedora 7 xen system with a domU to which I have delegated via pciback two isdn pci cards. One is a HFC-S card, the other a AVM Fritz!Card Pci 2.0. In the domU I load mISDN drivers for the cards. The two cards are recognized and function well UNTIL I either decide to unload one or both of the card driver modules (hfcpci and avmfritz) or I decide to shut down the domU. At this

Hello *! I would like to know how i can use an ISDN card (avm) in a secondary domain. I would like to use Asterisk PBX in a virtual domain. Any hints for me? Tnx, Guido _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Dear R-help, How can I replicate the beautiful math plot found in the right-hand side of http://www.r-project.org/screenshots/desktop.jpg? I tried the following code but didn't obtain something as beautiful. r <- seq(-10, 10, len=100) y <- cos(r^2)*exp(-r/6) par(pty="s") plot(r,y,type="l") Thanks in advance! Yung-jui Yang [[alternative HTML version deleted]]

Hi, I've been learning asterisk for a couple of weeks now - and it worked for me as faar as standard configurations where concerned (sip/iax outbound/isdn4linux & capi with AVM Fritz!, Digium X100P FXO). Now I recently I'evaluating to use asterisk as a replacemnt for our companies (15 employees) legacy pbx system and I'm experiencing multiple problems with the hfc isdn cards:

Dear R-help, This is my first R day. I want to ask some more beginner's questions. Q1. How can I obtain the covariance matrix for parameter estimates of a multiple regression? I checked ?lm but didn't get the information. Q2. How can I see the old graphs in the graph window? Q3. Can R plot animated graph? For example, I want to see the dynamic change of a 2D graph during a time