similar to: Softphone for Linux recommendation

Surely there has to be one soft phone that works under Linux. I've tried: kphone - it sometimes complains about the need to release the sound device linphone - sssssssslllllllllooooooooowwwwwww iaxcomm - needs some strange widgets various others - either only supplied as binaries, or just plain don't work, or won't compile. Is there just one out there that is guaranteed to work with

Is anyone having/had a problem with a TDM400P card hanging up on STD outbound calls as soon as the called party answers. I'm guessing that * is responding to the STD pips in some way. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you

Is it possible to run the Festival command in the same manner as the Background command so that it can be interrupted by caller key presses? -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you want a system that just works, you choose

Hi There, i think all VOIP clients for Linux are unusable! i got testet: Linphone + Linphonec all in version 12.2 Kphone gophone and other... the only programm that is usable is gnomemeeting... does anybody knew some other tools? Best Regards, Mark

Hi, all I am building a new server. Have installed FC 6 and put in TDM400 card. Checked out latest asteriusk code, run make install in zaptel directory. So far all is fine. Now I am trying to install the drivers. # modprobe zaptel FATAL: Module zaptel not found. Fair enough, no zaptel driver is found on the system. Is there are any known problems with FC6? I did not have much trouble running

I'm not sure if I have a configuration problem or not. I am unable to dial out. When I try to dial in I can hear the phone ring on the dialling phone but Asterisk does not register anything. In zaptel.conf I have loadzone = au defaultzone=au fxsks=1 In zapata.conf language=au context=from-pstn When I do: zap show channels I get: Chan Extension Context Language

Folks, I'd like to change the value of ${CALLERIDNAME} for incoming PSTN calls from certain numbers, but haven't found a way that works. The goal is to provide more informative names on my phones' caller ID displays--e.g., I would prefer to display "ROB CELL" instead of "CELLULAR CALL" when I call home from my cell phone. This is what I tried in the context

iaxComm is a crossplatform open source softphone utilizing the IAX2 protocol. It is distributed as part of Steve Kann's iaxclient library. I've just posted new Windows, Linux and Mac OSX binaries to sourceforge. The Windows binary was compiled on WinXP. The Linux binary was compiled on RedHat 9. The OSX binary was compiled by Andreas Wrede on 10.3 and was tested on 10.4 (Tiger) beta.

I'm still learning some of the basics. Can someone explain in layman's terms what's the difficulty for Asterisk to support SIP/TCP (and even RTP/TCP)?

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

I have one TDM2404E digium card on asterisk box, after configuring the zaptel and zapata configuration files, I am getting these errors when reloading asterisk: ast_unregister_indication_country: Removed default indication country 'us' setup_zap: Ignoring signalling setup_zap: Ignoring answeronpolarityswitch unable to recognize channel 13-5 what is the reason for that? Thanks,

Hi there, what phones are available that have two ethernet ports? I want to do some cabling at a new installation and i heard there are such phones (SIP i guess) out there. That way i dont have to run two cat5 to the user desktop. I think 3COM had one but can't find the web site reference for the two port phone thanks, erick

Hi, I need to setup a demo for asterisk and need some help here please. The demo is connecting to Asterisk a Cisco 7970 SIP (ver. &.0) and a SIP client on HP iPAQ via a wireless hotspot. I need to configure both with the same extension with a shared line like in Cisco CallManager. This way if the extension is called both iPAQ and the IP phone ring and the user gets to pick up using either.

When I try to start up zaptel, whilst running ztcfg, I get the following error: Jan 1 10:48:18 bu ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6) My /etc/zaptel.conf is: fxsks=1 fxoks=2 loadzone = au defaultzone=au Channel 1 is a X101P card connected to the PSTN and channel 2 is a S100U box driving an analogue phone. The zaptel kernel module gets loaded OK as does the

Hello: I have successfully install spandsp and patch asterisk with it. But when I received a Fax is garble or shrink. Does any one know why???... Am using a PRI T100P card to receive the fax and save it to a tiff file... Any help will be greatly appreciated. Here are the versions. Latest csv from asterisk, spandsp-0.0.1k.tar.gz redhat 7.3 T100P has its own IRQ. Any help will be greatly

All the clients that I'm aware of for IP telephony have drawbacks. Some won't work at all. KPHONE -- Kphone works best for me, but Kphone doesn't have a dialpad to dial tones during the middle of the call, so the demo that * comes with can't be run. Kphone (3.1, the latest) also has a habit of crashing if you do something even mildly stressful, such as hang up while Kphone is

Will Wait(n) still listen for DTMF input from the caller after there has been a Background(some-message) prompt, or do I need to use Background(silence/n) to still listen for DTMF? -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you want a

I've been trying all day to reach their techie folks to ask a couple questions about something I worked all weekend on. Keeps rolling to VM and the receptionist does the same thing. Just was wondering if anyone else was able to reach them today. Brian Greul Texas Shirt Company www.txshirts.com 713-802-0369 / 713-861-6261 (fax)

Hello all, I am in the process of converting our company over to * to replace our ancient executone system. As part of the testing process my boss wants us to all run softphones on our desktops until he gets the phones ordered. Quite a few of us run fedora core 2, and I haven't had any luck getting a soft phone to work. Kphone works the best out of all I have tried but I get no sound out of

I think I have something misconfigured regarding voicemails. They work great, I have this setup: Sip.conf [ext1] Context=phones Mailbox=201 Voicemail.conf [home] 201,password,name,email@mail Voicemail delivery and all works great but when I check sip extension ext1 (analog phone using a Granstream ATA 286), the stutter tone signaling message waiting does not work. Anything wrong with