similar to: Suse 9.2 / Latest CVS

We have setup an asterisk box to let everybody call into the university internal network, but I get unexpected hangups when doing an outbound call from SIP to the ISDN interface, and it happens from 20 seconds to some minutes into the call. ----------the dial and the problem----------- -- Executing Dial("SIP/57966-a19d", "Modem/g1:96121||rt|") in new stack --

Hi all, this is a rather "newbie-oriented" question, so please bear with me... The system running Asterisk has been provided with an AVM FRITZ!Card PnP. SuSE Linux 9.0 recognizes it right after booting the system and it seems to be configured (MSN) correctly... The hwinfo looks like this: --- pbx:/etc/asterisk # hwinfo --isapnp 11: ISA(PnP) 01.0: 10300 ISDN Adapter [Created at

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

I need HELP pls! BRISTUFF: Bad Sound quality CAPI : PTP Mode dont supported mISDN : kernel is 2.4.x and not 2.6.x HISAX : PTMP ok, PTP incoming ok but in outgoing asterisk dont compose number(i listen dial tone and than i can compose number via dtmf) Asterisk CLI (g3 is group of Modem[i4l]/ttyI0 and ttyI1): Called g3: 3453444444

Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an

I posted a message a little while ago but got no response (that I can recall), I've also seen other people mention this issue. Basically, when you have music on hold, it doesn't play the music on hold, the debug info shows it is starting and then stops straight away.. # My extensions.conf ... exten => s,1,Answer exten => s,2,DigitTimeout,5 exten => s,3,ResponseTimeout,10 exten

All, Currently I've got my Asterisk machine running smoothly on IP bases. Meaning I can reach all phones or softphones within my LAN or remote LAN's via VPN. The next step for me is connecting it to the PSTN network. After some tweaking with the modem.conf I got the i4l driver running correctly, and it appears that my Fritz! ISDN v2 card is working correctly. I have added the

hi ---------modem.conf :---------- msn=240862922 incomingmsn=240866365,6365 device => /dev/ttyI2 group=1 device => /dev/ttyI1 ; ttyI3, ttyI4 ---------extensions.conf ;------- [sip] exten => _XXXXXXXXXX,1,Dial,Modem/g1:BYEXTENSION (Sjphpone) Call to : 024076xxxx result : --Executing Dial(Sip/roseau-6163","Modem/g1:BYEXTENION") in new stack -- Called g1:024076xxxx --

Well, it has been a long time since I used my NetJet S cards with asterisk (moved to the quad PRI card) but I am trying to get this working again for home use. Basically, what I am using is this: Linux 2.6.8.1: config lines: # ISDN subsystem CONFIG_ISDN=y # Old ISDN4Linux CONFIG_ISDN_I4L=y # CONFIG_ISDN_PPP is not set CONFIG_ISDN_AUDIO=y # CONFIG_ISDN_TTY_FAX is not set CONFIG_ISDN_DRV_HISAX=y

Hello! Im pretty new of asterisk world: my goal would be using iaxcomm to call ppl over POTN. Yesterday i configured asterisk to be able to hear a song (with Playback() command) with iaxcomm, and it was wonderful. Now, today i tried to configure asterisk to use my ISDN4Linux supported card (a plain HFC card) with asterisk. i configured modem.conf this way, after reading

hi, i installed asterisk and works very well, the only problem is that when i try to call a direct number of a company that has a normal PBX i got this error: to 10.8.210.153:5060 == Accepting call on 'SIP/a.sampietro-f7be' (a.sampietro) -- Executing Goto("SIP/a.sampietro-f7be", "doisdn|BYEXTENSION|1") in new stack -- Goto (doisdn,00115601992,1) --

The card is an ASUSCOM ISDNLink PCI (passive) and the circuit is from Qwest (in the US). I will be using this circuit only for voice (I'm doing this because of the poor quality of my POTS lines). I've compiled Hisax (as a module) into my 2.4.25 kernel, and with 'modprobe hisax type=35 protocol=4 id=hisax' I get the following: Apr 7 10:34:24 dev kernel: HiSax: Linux Driver for

hi, I am new to * and setting up a test system. here my setup : - debian (from knoppix 3.3) - Asterisk 0.7.1 (from the debian package) - AVM Fritz card used with i4l - softphone I use for testing SJphone on windows - I can make great softphone - softphone calls - I can call from an outside line * and get connected to a softphone here my problem: I can not make outbound calls. I place a call

Hi, i install the Asterisk PBX on a linux machine with i4l to connect to PSTN (EuroISDN). And i configure a very simple dial plan in extension.conf. After this, i connect with a SIP program to asterisk and would call my cellular phone, but got this error: -- Executing Ringing("SIP/ACzerniak-0904", "") in new stack -- Executing Dial("SIP/ACzerniak-0904",

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

Hi. I'm working with i4l with asterisk CVS-02/21/03-13:59:12, plus i4l (chan modem i4l *dsp patched* and kernel 2.4.19 patched to disable dtmf). All seems ok (apart some echo issues that seems gone with mec2 aggressive suppressor), but outgoing dtmf doesn't work . or at least I hear the very first part of the dtmf, but then it seems suppressed. here's my modem.conf [interfaces]

Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing

Hi all, I have this weird problem. I'm running asterisk 1.0.3 on Debian Sid (official debian package). We have 2 fritz ISDN cards. All is working great. Till I called the bank. It rings one time and then gives me the congestion tone. Here is what I see on the CLI (phone nr obfuscated for privacy reasons): -- Executing Dial("SCCP/michiel-00000004",

Hello all, I currently have an Eicon Diva Client isdn card using i4l. Outbound dtmf doesn't work (and never has), but there has been an annoying problem with false dtmf detection in calls (that could be triggered easily by blowing into the receiver on the remote end). I looked through the list and found two patches that need to be applied - 1 to isdn_tty.c in the kernel, and another to

Hi, Apologies in advance for the lengthy email. I'm new to asterisk and have trouble with isdn4linux. The setup is very basic like this: winxp ------- asterisk -------- winxp x-lite | x-lite | pstn The hardware involved is: Compaq EVO with RH9/kernel 2.4.20-30.9. Fritz!Card PCI v2 Asterisk CVS-04/17/04-21:36:18 Basically