similar to: Some questions (maybe Nikotel related)

Hi thanks to everybody who responded to my earlier post. I have looked at all the material and links provided and tried everything in there, but it simply won't work for me. My SIP phones register with Asterisk, but they cannot be called (everybody is busy at this time) nor can they call anything (error code 4, whatever that means) not even internal (yes I did give them appropriate

Hello list! I'm using "Asterisk CVS-11/22/03-04:28:51" and try to route my normal (classic) phone calls via nikotel (www.nikotel.com). I can talk about 1 minute and get then disconnected. Here my current configuration parts which affect nikotel: register => chabrol:PASSWORD_REMOVED@nikotel/500 [nikotel] type=friend secret=PASSWORD_REMOVED username=chabrol fromuser=chabrol

Hi thanks to everybody who has been assisting me in solving the various problems I had to dial out from Asterisk to a PSTN number with SIP using Nikotel's VoIP service. I have drafted a mini-how-to which is available at http://www.akabeni.com/benjk/Using_Asterisk_with_Nikotel.pdf This is a first draft, I will amend this further, in particular the "verify and debug" section

Hi all, I registered a SIP account at budgetphone.nl/talkin2ya.nl Receiving calls works like a charm, I even redirected my normal PSTN number to the number I got from them so everything ends up in my * server. Before I ask them to take over my normal phone number I wanted to test all of it, so I ordered some calling minutes to test. Now I cannot get outbound calling to work with them. Anyone here

Hi! I've read in the archives that there are problems concerning Nikotel calls being disconnected after two minutes. I had the same problem yesterday. Is there a fix? There was only a "giving up" statement after the last e-mail in the archive, I'm about to do that too. Here's my sip.conf entry for Nikotel (left out the register stuff 'cause it's working):

Hi please excuse if this seems obvious, but I am new to this and the SIP section in the Asterisk handbook do not give any clues nor do the SIP examples in there seem to represent real-world situations. I am using Nikotel as a VoIP provider (for now) and I would like to configure Asterisk to sign on with Nikotel so that I can use the telephones connected to Asterisk to make calls using the

Hi A few days ago, Kelly remarked that he had previously observed that Nikotel charged him for calls he did not actually complete. I have made a number of test calls to my landline without picking up the calls. I just let it ring once and hung up on the calling phone. A look at the call records on MyNikotel reveals that I was charged six seconds for every of these calls. I have raised a

Hi folks, this does look like a bug to me: Asterisk replaces the @63.214.186.6 by @context which obviously leads to a failure. Any comments, do I have a configuration issue on my side that I missed? Cheers, Philipp -- Executing Dial("SIP/philipp-bd5f", "SIP/992365264680@nikotel- out|90") in new stack -- Called 99xxxxxxxxxx@nikotel-out -- Got SIP response 302

When I place a call using Iconnecthere or Nikotel as my sip provider, I hear no ringback tone when making a call. I have tried adding the 'r' command to the dial sting with no help. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL:

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

I have SIP registrations working correctly for FWD and Sipphone, but it is impossible to connect to Sipcall or Nikotel, I saw that someone on the list has problems with ICH. To try and sort out the problem I tried to register to Sipcall with Linphone and sent the dialogs to tech support of the equipment provider. Here is their answer:- The reason the registration fails is because not

Could anyone please help me with that: I have an analog telephone connected to Asterisk using a Sipura 2002 ATA. When calling the extension, the caller ID presented is always the number of that extension rather than the number of the calling one. While I learned that this is the new standard behaviour (?) of Asterisk, I want to show the original caller ID. I tried the options o and f in the

Hi all, Is there a possibility to set the codecs Asterisk will choose in the dialplan ("exten=>" statements or their contexts) instead of sip.conf? My problem is that I connect my SIP phone with several providers (Nikotel, Sipgate, Stanaphone) for icoming and outgoing calls. Not all of these providers offer the same set of codecs. I'd like Asterisk to use the same codec for the

Hi All, I was wondering, in my effort to show how Asterisk can replace Call Manager, if there is support for call transfers/forwarding from the users Cisco 7940 SIP phone to either another SIP client or through the AS5300 on to the PSTN. I do see some stuff in the docs but seems to be specific to a local PRI board in the PC of which I don't have. Any experiences/comments most appreciated.

Hi I have just been struggling for four days to get SIP working and now as I created a voicemail box, Asterisk has become very unstable and it can't bridge SIP phone to SIP provider calls anymore. Calling internally from one SIP phone to another works fine. Calling internally from a SIP phone to an analog phone on a Zap channel and vice versa works fine. Incoming PSTN calls delivered to

we started using an ocfs file system about 4 months ago as the shared archived redo destination for the 4-node rac instances (HP dl380, msa1000, RH AS 2.1) . last night we are seeing some weird behavior, and my guess is the inode directory in the file system is getting corrupted. I've always had a bad feeling about OCFS not being very robust at handling constant file creation and deletion

Hi! I have the problem that a host can not with the 'netbios name' and the 'alias' in a domain. Under samba 2.x it can be done without any problem. My samba version is: 3.2.7 Netbios name: u10 Netbios aliases: u2 Host has only one IP. Security is 'domain'. When I type: # net rpc join MEMBER -U Administrator -n u10 I can join the domain. Access to u10 is successful.

Hi all, I wrote a small script (developed and testet on Solaris 8), which automates the generation and installation of the steps needed to put keys in place. I you are interested to take it, feel free to do it. -- *** Freundliche Gruesse **** Best regards *** Anton Burkhalter Dipl. El. Ing. HTL Mobile:+41(0)78 844-0290 mailto:anton.burkhalter at gmx.net

Le 17/04/2018 ? 14:18, kfx a ?crit?: > dovecot 2.2.34 > solr 7.2 > > I only see new messages after typing on the server "doveadm fts rescan > -u username" though I've followed the wiki and added "fts_autoindex = > yes" in 90-plugin.conf . Subsequent search for the same pattern always > gives the same result, ignoring new emails with that particular

Hello all. Has anyone managed to get SIPCALL.co.uk's service working with the [*] box? I've managed to register with other SIP providers but not SIPcall. The debug just show's [*] attempting to register. But receiving a 401 error everytime. Cheers Matt