similar to: passing opermode to the wcfxs module

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

Hello, Right now there is not a table build script at: http://www.voip-info.org/wiki-Asterisk+RealTime+IAX Therefore I have taken the SIP build script and added a few fields that I use from my iax.conf (could be more out there, please see the complete build script below): `dbsecret` varchar(100) default '', `notransfer` varchar(100) default '', `inkeys` varchar(100)

Hi All; If I need to set the opermode to King Saudi Arabia, what the name I have to use? For example, to set it for kuwait then I use opermode=KUWAIT. So what will be for Saudi Arabia? Any advise? Regards Bilal

Hello The Ubuntu Asterisk package doesn't install /etc/modprobe.d/dahdi.conf, so I was wondering where to put the following line: ======= options wctdm opermode=FRANCE ======= Should it be in /etc/dahdi/modules? ======= options wctdm opermode=FRANCE ======= Thank you.

hi we need a predictive dialer which can be used with asterisk software. Is it possible? Bye Owais Bin Zuber --------------------------------- Do you Yahoo!? Yahoo! Search - Find what you’re looking for faster. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040310/a49a4b5c/attachment.htm

I am finding that I have to increase the txgain in zapata.conf to 8 when my X101P is connected to my BT phone line, otherwise people can hardly hear me. This then gives echo issues. Do other people have the same problem on BT lines. I was wondering if I should give BT a call and get them to increase the gain on the line. Strange though as the rxgain is OK and I don't have this problem with

Hello, I would like to know if FreeBSD has drivers for TE405P cards submitted to the ports. I have acquired a card and would really like to use it with FreeBSD. The wiki said the drivers havent been tested yet. Have there been any updates since then? regards Kavit _______________________________________________ Asterisk-Dev mailing list Asterisk-Dev@lists.digium.com

> > That would be called a milliwatt generator. It likely exists in their > central office, but its typically used by their technicians to ensure > new installations meet specs and sometimes in troubleshooting. Call your > telco repair number and see if they will give you the telephone number > for it. I'll try that. 1st line technical support at Telstra are not known for

Hi, I'm not sure if I just missed something somewhere along the way, but I noticed while I was going through the CVS logs that there is an option in the wcfxs module to set an "opermode" - which apparently might help with echo issues around the globe (like the ones I'm seeing - some times). So I'd love to use it and give it a go. Apparently, there are some options that

In my seemingly endless search for the cause of echo on my SPA3000, I wired it up in the following configuration: Analogue Handset <--> (FXS)SPA3000(FXO) <--> PAP2 And set the Line1 dialplan on the SPA3k to '(<:@gw0>S0)' which means that as soon as I pick up the handset I get linked straight through to the PAP2, which gives me dialtone. Even in this configuration, with

Hello users, I have a Digium Te235 and asterisk 13 which have worked well with 1 carrier but we have failed to add a 2nd carrier. The second telco brings their E1 line over finer, terminated in a RAD modem and they give me ethernet to the E1 card. It's the first time i am having install such a solution, which ideally would be not a big problem. However, The physical layer has failed to

I have re-labeled tick marks on the x axis. The problem is that by using axes=FALSE, the axes disappears and when they are called back using axis(side=1)..etc. the axis on sides 1 and 2 do not meet at the bottom left corner of the graph. I would also like to have the 3rd and 4th axes in there as well, all meeting in their respective corners. par(mfrow=c(1,2)) gut<-c("Full",

Hi I'm sorry for the my trivial quest. I Have asterisk 1.4 with TDM 400 with FXO and FXS, and works fine from several months. Now I want to connect a device to TDMFXS that want a ring frequecy of 25 hz to activate: i am italian, and usually the ring freq is 20 hz. The other time (I have used that device several times with other asterisk installation) I have modified /etc//modprobe.conf and

Hi guys, I've been experiencing a very strange issue with my Digium Card TDM400 as of this week. It has two FXS and two FXO. The FXO modules (both of them) never goes on-hook after hanging up in Asterisk. It had worked perfectly well for over four years. I put an ammeter in series with the line and the card, and immediately after plugging the connector to the card, I got 26mA in the circuit

I am still having unacceptable echo on my X101P and twidling with the rx/tx gain levels and echo settings appears to have no discernable effect. Some questions for those who may have more significant electrical engineering background than I. 1. This impedance match thing ... will it affect this solution having other phones in parallel with the X101P? This is done so that I can test while not

Hi! The X100P is working - partly. I can make outgoing calls. But the card has got a problem detecting incoming calls. Even in verbose mode I don't see any hint that the card detects a call. At the moment I'm using the card behind my old ISDN telephone system. Could it be a problem with the line voltage? Can I adjust anything when loading the kernel module? Bye! Michael

Hi there, I'm experiencing an echo problem and dammed If I can sort it out. We're running Asterisk on Fedora Core 3 64bit, installed as per http://www.voip-info.org/wiki-Asterisk+Fedora+Core+3. These are the specs of the Machine ? 1 x AMD A64/3500+ CPU: Desktop Athlon64? Retail w/fan SKT 1 x Asus A8N-SLI Deluxe Athlon? 64 S939 NVIDIA nForce(r)4 SLI? PCI Express Req: 24pin ATX 1 x

On Tue, Jun 30, 2015 at 3:34 AM, Tony Kasule <timotsmith at gmail.com> wrote: > Hello, > > Anyone to help me with this issue? It has never worked :( > > On Wed, May 20, 2015 at 11:34 AM, Tony Kasule <timotsmith at gmail.com> > wrote: > >> Hello users, >> >> I have a Digium Te235 and asterisk 13 which have worked well with 1 >> carrier but

What response do you get to *CLI> pri show spans ? On 30 June 2015 at 09:34, Tony Kasule <timotsmith at gmail.com> wrote: > Hello, > > Anyone to help me with this issue? It has never worked :( > > On Wed, May 20, 2015 at 11:34 AM, Tony Kasule <timotsmith at gmail.com> > wrote: > >> Hello users, >> >> I have a Digium Te235 and asterisk 13

I'm a complete Asterisk novice and have an installation based on the Asterisk@HomeCD. I've installed my TDM400P with 2 x FXO & 2 x FXS, but every time I try to dial out, I get a message "No circuits available". Can someone confirm the pinouts for connecting the FXO's to a UK BT Line - I have RJ11 connectors on the back of my TDM400P card, so ideally I'd like to