similar to: asking for readers input into the following config...

the Telco, I can make calls in. What I am trying to get though is how to pass through the DID range. The E1 that I am connecting to the Telco with, used to connect direct to the NEC system and already has hunt group calling enabled for all 30 channels. Also, I was given a 100 number indial range (from 00 -> 99). If the E1 is connected to the NEC directly, I can call 5555 7320 and the NEC

On Mon, Nov 17, 2008 at 10:20 AM, Tony Mountifield <tony at softins.clara.co.uk > wrote: > > If I do this from an NEC digital extension I get 141496920000, but if I > do > > it from an NEC POTS extension I get 1942124000 > > That looks like when you pick up the analogue phone and dial 9, it > immediately opens the outgoing line and sends the 141 acces code, but >

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

Hello all. I have an NEC PBX connected via a TE210p E1 line to an asterisk 1.6 box. NEC -> E1 -> TE210P:1 -> * -> TE210P:2 -> E1 -> Telco Incomming calls from the telco to the asterisk box to the NEC work fine with indials and everything. Works sweet. Outbound from the NEC to the Asterisk box fail. Giving an long dial tone that then times out. Ie, pick up NEC handset, dial

Hi everyone, our setup includes a NEC PBX connected to our asterisk via bri lines. The NEC has a doorphone feature, which is just an extension that calls you when someone rings. When connected to this extensions, a 'flash' signalling opens the door. So now, i'd like to trigger this from asterisk, too, but unfortunately wasn't able to do so. Setup: asterisk

Hi ? I am trying to get 2 accounts from voipblaster to talk to each other. Calls withing voipblaster network is free. If I configure two sip clients?with the two accounts it works fine however with Asterisk I am getting SIP 401 ? In my Sip.conf file I?under general ? register = user:password at sip.voipblaster.com ? then I have a sip peer ? ? [FreeCall](default) type= friend context= incoming

Hello Group, Current Setup: - Eicon Quad BRI ISDN Card. - 4 ISDN BRI (Telco: Telstra) Onramp2 services. - Mode: Point2Point. - 100 Indial Number ranges. Full National Number (9 digit format): BAAAAAAXX where: B (Area code): 2/3/7/8 A (Normal Numbers) X (99 Indial extensions) eg: BAAAAAA00 BAAAAAA20 etc Requirement: - To be able send Indial numbers as Caller ID when dialing out. Configration:

Will the FXS cards that work with asterisk handle rotary? Are there any channel banks that can convert rotary to touch tone (like some sorta bridge)? The goal is to be able to log input from rotary phones. Full PBX functionality would be nice but... (It's for a project, not for serious production). -- // Ethan O'Toole //

Hello all, I have the following working (somewhat) setup: TELCO | | E1 (30 Chan -- TE210 SPAN 2) | | Asterisk box 1.6 with DAHDI drivers loaded Digium TE210p | | E1 (30 Chan -- TE210 SPAN 1) | | NEC PBX

this happened to me on a cvs update, rebuilt a clean chan capi cm and all is well. Greg ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Voicomm User Sent: Monday, September 19, 2005 3:29 AM To: Armin Schindler Cc: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Asterisk ISDN: Problem

Looking to install asterisk for a client and was shopping around for prices for 6 POTS lines with or an integrated T1 with voice and data. I called up Sprint and I told the sales rep that there was going to be a Phone system she said that they would have to install "key" rotary lines and then I told the rep that I needed two more lines with hunt group and she told me that would be

dear All i signed up with an Aussie provider who gives me a DID in Aust... when I call my number I get the following on the console Mar 21 05:54:15 NOTICE[68071]: chan_iax2.c:6123 socket_read: Rejected connect at tempt from 203.13.163.245, who was trying to reach 's@' the s part i can understand by the @nothing ......?!? my iax.conf looks like this register =>

hi there, i run asterisk 1.4 on my debian machine, which is in my internal 10.x.x.x network, behind my main computer, i cam make call, receive calls, all works fine, with all providers except sipgate.de, there i can receive call and make them, i can hear the other end but they can not hear me, this is only the case with sipgate.de i don#t know how to configure it and thought maybe someone can help

This page http://www.freecall.com/en/index.html is advertising free calls to: Argentina, Australia, Austria, Belgium, Canada, Czech Republic, Denmark, France, Germany, Hong Kong (+mobile), Hungary, Ireland, Italy, Luxembourg, Malaysia, Monaco, Netherlands, New Zealand, Norway, Panama, Poland, Portugal, Puerto Rico (+mobile), Russian Federation, Singapore, Slovenia, South Korea, Spain, Sweden,

Folks, I've got one of those GPO 1950's rotary dial phones that I'm trying to get working in the UK. I've got pretty much everything working with my TDM400, the phone rings and I can receive calls but I cannot dial with the rotary dialer. I have set pulsedial=true or whatever the exact setting is and I can dial from the phone by lifting the receiver and tapping out the number on

I'm trying to use a couple of old Western Electric type 500 phones (desk model, rotary dial). These phones work fine, as tested with telco lines (they dial, receiver/transmitter works fine, etc). I'm running Asterisk 1.6.2.11. I can't get them to dial through Asterisk. They are connected to a Rhino channel bank which is connected to Asterisk via a Sangnoma card (T1 with echo

Ok... I am not a telephone guy... I was born after rotary phones, so forgive my ignorance in this matter. I am trying to get a really old rotary phone up and running with an ATA. Why? Who knows... just thought it would be cool. The problem is that it does not have an RJ11 connector, instead it has three wires (green,yellow,red). Does anyone know what that type of connector is called? Or

Hi All I've done some reading on the wiki and read some of the mailing list archives, but can't see anything on this. I guess this means I'm either searching on the wrong thing, or have totally the wrong idea... Can anyone suggest if the following is possible? Currently, our office has a 24 analogue extension PBX, and 2 ISDN lines providing it with external connectivity. We have

Hi, I'm trying to mount samba shares onto the file system, but at the moment i only seem to be able to mount them as root. I've tried changing the permissions on the mount point and even mounting it on a subdir of my home directory but mount just keeps telling me that only root can do this. I've put an entry for the mount in /etc/fstab with the user option, what have i missed? I'm

Hi, I am just trying to figure out how to setup a TDM04B card for incoming/outgoing calls. I have 4 lines, which are provided as a rotary trunk group, currently hooked into a Nortel system, which asterisk will replace. I have setup a Dell 1800 (Tower) system with the TDM04B card, which seems to work. The question is how do I set it up that all 4 lines are part of a trunk group, such that