similar to: Problem with call pickup

Hello list, Im writing my dial plan, in witch every SIP phone begins with 74 and has more 3 numbers (like 74XXX). So, I want to route all 74XXX calls to my sip channel. For this I wrote this line: exten => s,1,Dial(SIP/74118@193.136.252.5,30,r) but this way all calls go to 74118@193.136.252.5 ..... Then I tried: exten => s,1,Dial(SIP/${EXTEN}@193.136.252.5,30,r) but this way, the

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

Hello everybody, I would like to know if there is a support of IAX in vicidial. I want to make predictive dialing use vicidial using IAX soft phones. Thanks in advance Lamine -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040924/d1cc487b/attachment.htm

Hi everybody, I would like to decrease the load of my asterisk server. Could someone recommend me a solution? I have thought about a hardware component that would do some tasks as compression/decompression or codec translations but wonder if such a solution exist. Thanks for any suggestion Lamine

Hello to all Im looking for a billing tool for Asterisk, that works with PostgreSQL. All the tools I found in www.asteriskbilling.com just work with MySQL :( Do you know a nice billing tool for Asterisk with PostgreSQL? Thanks Joao Pereira

Hello I need to buy IP Phones to work with Asterisk, and I'm in doubt between Snom and Cisco Phones. Can you gurus, please, give me your impression of these 2 brands? I need to focus more in SIP and Asterisk compatibility and less in pricing (yes, I know the Cisco are more expensive). Are there any features that Snom has, that Cisco doesnt? And are these features important? Thanks Joao

Is it possible to implement a dial-out call queue in Asterisk? My idea is to give Asterisk a list of numbers, and then he makes the calls and delivers the calls to a call queue. Then, the agents will answer the calls. Is this possible? Thanks Regards Joao pereira

-----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris Mason (Lists) Sent: Monday, September 17, 2007 12:45 PM To: joao.pereira at fccn.pt; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Call Center SoftPhone with Auto Answer Joao Pereira wrote: > But still, the

Hello I want to use Asterisk to implement a SIP Domain allowing my clients to do URI dialing and receive calls from the Internet through URIs and ENUM. My question is, should I put my Asterisk outside the firewall (in the DMZ) to allow connections to the Internet? Or should I have it inside my local network and put a SIP Proxy (like Openser) in the DMZ to implement the SIP domain? Thanks

Hi all I have a pocketPC Toshiba e750 and I want to make SIP calls from it, but I didnt found any free softphones for my Toshiba. X lite's versions for pocketPC isnt free :( Did someone used before a free softphone for pocketPC? witch one? Thanks Joao Pereira www.fccn.pt

Hi, As many of you may know, we are undertaking several tests in order to test the interoperability between several PBX IP from different vendors. Until now, we were trusting that the VoIP IP PBX were good enough to be interconnected directly, however, one of the vendors have presented the "SBC" concept. The "SBC" (Session Border Controller) is not a new concept since we

Hi everybody, I have been searching around for days on how to record calls between SIP phones.Could someone tell me whether it is possible? The Record command doesn't seem to work during a call. Thanks Lamine

I know this issue has been covered with at least 2 different patches, and probably a dozen different discussions, however I'm a bit unclear as to what my options are. I have a DSL line coming in with 8 IP addresses going to an OpenBSD firewall doing 1:1 NAT for machines behind the firewall. My asterisk box is one of these machines, and I'd like to allow foreign SIP clients

Hello to all When my SNOM (300 or 320) loses Internet connectivity, it loses its Asterisk registration (ok, thats normal). But when the phone is back online, he doesn't try to register in Asterisk. I believe this happens to avoid flooding the private LANs when the Internet link is lost.... but the problem is that the phones don't try to re-register in the future.... Sometimes it stays

Hello I have an old Asterisk where I need to listen to Agent calls. So I created this code: exten => _555,1,ChanSpy(Agent) exten => _555,n,Hangup() But I always get: 2009-10-22 16:00:38 WARNING[5695]: pbx.c:1720 pbx_extension_helper: No application 'ChanSpy' for extension (default, 555, 1) It seems that Asterisk doesn't have ChanSpy enabled... is this possible? Which

Hello I'm trying to use an AGI that returns the queues status (numbers of available agents, etc ), but I'm having some problems with it (it's still very buggy). Is there any AGI repository with source code samples? Had anyone used an AGI to check queues and agents status? Thanks regards Joao Pereira -- StarTel - A Rede Livre Joao Gomes Pereira www.startel.pt +351 304500650 sip:

Hello I'm trying to register an Asterisk working behind Nat. Here is the trunk: register=username:password at sip.startel.pt [startel] type=peer host=sip.startel.pt username=username fromuser=username secret=password qualify=yes disallow=all allow=ulaw allow=alaw allow=gsm insecure=very port=5060 nat=yes canreinvite=yes The problem is: Asterisk is registering with its

Hello Im using Asterisk as a SIP client of Kamailio with RTPproxy. Asterisk is behind NAT. X-Lite and SNOM phones behind NAT work fine. But when I try to connect with an Asterisk behind NAT, the Asterisk client doesn't receive sound. I already tried in 2 different NATs, with no firewalls. This is my Asterisk config: [kamailio] type=peer host=xxx.xxx.xxx.xxx disallow=all allow=ulaw

On Thu, 2006-03-02 at 11:42 -0600, Jordan Novak wrote: > Does anyone have a way to do wake calls? > > > > Jordan Novak > > Communications Technician > > Logistics Health Inc. You could use cron and /var/spool/asterisk/outgoing scripts to dial numbers, etc... > Can you elaborate, I am fairly new to Linux and a phone guy to boot. I am looking for a way for the

Hello to all I'm using asterisk 1.4 and dahdi. I had everything working fine, and I could place calls through my R2 channel. But now the channel is always "RED" and Im getting this error message: TE4XXP: Version Synchronization Error! Here is my chan_dahdi.conf------------------------------ [channels] language=en context=incomingr2 signalling=mfcr2 mfcr2_variant=ar