similar to: Call Pickup Problem

Hello, I checked out the asterisk version from the CVS. But I dont seem to have the addmailbox script. How can I setup a mailbox without this utility. Regards, Rajesh Golani

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Hello all, I'm trying to get "remote call pickup" (*8) working and I'm running into a bit of a problem. First the machine specs. This is a P4 2.66ghz w/ 512meg of RAM. I downloaded the CVS of asterisk on 04-16-2004, but I'll probably try to upgrade to the latest tomorrow. The machine has a T100P card and we are using channels 1-8 for voice, and 13-24 for data. The

Hi List, I have two Cisco ATA, one of them with two phones attached, and the other with just one phone. The ATA with two phones is behind a NAT, and Asterisk and the other ATA have public IP addresses. I can place and receive and blind transfer calls between them all. (Sometimes I loose registration from the ATA behind the NAT, but I think I have to upgrade to the latest firmware in the ATA) Now

I cannot use CVS, is there anoyher way to use direct pickup ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez Inviato: venerd? 16 settembre 2005 17.53 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: RE: [Asterisk-Users] direct sip call

More than one hundred messages related to *8 or call pickup problem in last 6 months!! Please someone in the development team could clarify this and make himself responsible for the response. By now It seems a bad joke. We have spent thousand dollars with hardware, sip phones, working men hours, and with digium stuff (E1, fxo, fxs cards etc) and we have had the *8 problem (sip callee ringing

hi listmembers, please test my new patch to chan_sip.c which is to make call pickup on the snom phones (and maybe other phones that support 'INVITE/Replaces') work and make comments in the bugtracker http://bugs.digium.com/view.php?id=3644 so it can make its way into the cvs. this patch sipsubscribe-20050715.rev779.txt enables: * monitoring of other lines (using the 'hint'

Hi. Seems that there's a hidden bug in sip call pickup with *8. If I pickup a Sip ringing phone from another sip phone on the very first ring (before the first ring completes), the ringing phone doesn't stop ringing, however the call is connected ok. But, if I pickup the call after the first ring, (after the first, the second, or during the second, or other silly combinations always

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

Hi! i have a problem with the PICKUPMARK of the Pickup() application. E.g. A calls B. B is ringing. C wants to pickup B. To make this work with PICKUPMARK I have to add the variable PICKUPMARK to B. But how can I do this? B is just created inside the Dial() application. thanks klaus PS: If you wonder why I use the PICKUPMARK - Pickup(exten) does not work for me as the incoming calls will

Hi all, how can I pickup a call from a queue? Which context parameter do I have to specify? The context that calls the queues application is ext-queues. This is what I tried so long (777 is the extension of the queue I want to pickup from): exten => _**ZXX,1,Noop(Attempt to Pickup ${EXTEN:2} by ${CALLERID(num)}) exten => _**ZXX,n,Pickup(${EXTEN:2}@from-did-direct) exten =>

I have a small problem, Whenever we pickup a call using *8 then try to transfer it via flash or # transfer the call is dropped. Any ideas? Whe have all called exten's in extension.conf ending in |t som that # transfers work. What am I doing wrong? Chad Sawyer, Manager, Network Administrator -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, when picking up an incoming call from one ip phone on another ip phone, the call terminates after about 5 to 10 seconds. When reading out the hangup cause variable in the h-extention of the dialplan, the hangup cause seems to be 111. In the dialplan output, you can see that SIP-peer sipacc3 picks up the incoming channel SipAgenT01-00001454, and the call is answered. After 7 seconds,

Hi list, i'm trying to do that iax channels can acces the pickup feature(normaly *8 dialing). But always the iax channel when dial *8, search for the extensi?n *8 on its context. I know i can program the *8 extension with the pickup applicati?n. But its doesn't works for me, becouse i need to pickup some calls comming from IVR's o Queues. And there de exten is no the same as the

Hello, We have a situation where a call comes in, users are notified via an external process (curl request to web service), and we can't answer the call until a callee can call in and pickup the call. How can we implement this functionality? We tried using : [caller-inbound-leg] ; code to send the CALL_UUID information to users. exten =>

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Is it possible to display the incoming calling number on a handset when trying to pick up a call from another handset? I currently have Call Pickup working using *8, I have also used the PickUp application successfully but I'm not sure how to use these features so the handsets show the incoming calling number and not the number that you have dialled to pick up the call. Regards David

Hi, sorry for annoying question; i read http://www.voip-info.org/tiki-index.php?page=PBX%20Call%20Pickup without understanding: 1. how to add an ext. to a pickup group (ie:. how to populate pickup group) 2. how 'Directed pickup' does work? "You dial the pickup number and your extension, and the call will only transfer if it is your extension" should i digit something like

Just by the way, do anybody knows if call pickup of a call to a sip extension from a mgcp phone is supposed to work (even if sip keeps ringing). The scenary is as follows: 3@mgcp02 (ext 136) calls sip/julia (ext 133) and after It starts ringing 2@mgcp02 (ext 135) dials *8. Nothing happens, only 135 gets congestion tone, 133 keeps ringing and in the asterisk console I get: --

Hello all, I have an asterisk @ home system running 1.2.4. Call pickup seems to be a bit of a problem. I've looked at a lot of posts and the wiki, which states that you need to define the pickup extension in features.conf and the pickup groups in sip.conf. I've done this, however there is no definition for *8 in extensions.conf. Is there supposed to be and it has been removed?