similar to: TDM400P - Problems

I am starting to dip my toes into the asterisk world, and to that end I've scavenged an old PC (this is a home project, and I have basically $0 to spend on it), and installed FC1. I've purchased a clone X100P (or at least I was told it was), and I am trying to get it to work. However, when I try and load the wcfxo module, I get the following errors... [root@loudhoward root]# insmod

Hi! I have fresh installation of Fedora (Core 1) RedHat Linux-2.4.22-1.2115.nptl The kernel source is in place /usr/src/linux-2.4.22-1.2115.nptl The config file for the kernel is in place /boot/config-2.4.22-1.2115.nptl As per zaptel instruction, i first created the kernel config file as follows: # cd /usr/src/linux-2.4.22-1.2115.nptl; make menuconfig (in the menu config window) I loaded the

Hi all iam trying to setup Dual gate using Julian patch DGD, but when i try tp patch to my kernel with fedora iam getting the following eroor can some one suggest me what is wrong or i need a latest patch for fedora [root@linux-2.4.22-1.2115.nptl]# patch -p1 < /root/update/update/routes-2.4.20-9.diff patching file include/linux/netfilter_ipv4/ip_nat.h patching file

Hi iam running FEDORA, i have installed Source of iptable 1.2.9 with the patch layer7-iptables patch done with out any errors and i applied patch in kernel to the layer 7 patch and i have select the required option by doing make menyconfig done make dep make bzImage make modules make modules_install make install and rebooted with customer kernel when i type iptables -t mangle -A

Hi LLVMers, The root of my SRC_DIR is: /home/hb/projects/src/llvm-1/llvm/ and the root of my OBJ_DIR is: /home/hb/projects/build/FC1/llvm-1-1. However, the configure script seems to have stripped some of the / from the paths: Makefile.common:63: /home/hb/projects/buildFC1llvm-1-1/Makefile.config: No such file or directory Makefile.common:69: /home/hb/projects/srcllvm-1/Makefile.rules: No such

Hi, Now, I've build the tools and the cfe. However, 'make check' gave me the attached results. Summarized as follows: # of expected passes 1081 # of unexpected failures 26 # of expected failures 32 I configured llvm with following options: '--prefix=/home/hb/llvm/ --enable-targets=host-only'. I used gcc version 3.4.2 to build the tools and cfe. The cfe is version:

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

On Sat, 2005-06-18 at 10:32 +0200, Henrik Bach wrote: > Hi LLVMers, > > The root of my SRC_DIR is: /home/hb/projects/src/llvm-1/llvm/ > and the root of my OBJ_DIR is: /home/hb/projects/build/FC1/llvm-1-1. > > However, the configure script seems to have stripped some of the / from the > paths: > Makefile.common:63: /home/hb/projects/buildFC1llvm-1-1/Makefile.config: No

Hi Henrik, You don't have the latest C/C++ Front End Source code. Please update from CVS to get the fix for the 2005-06-15-ExpandGotoInternalProblem.c test. Note the date of the test (5 days ago). Reid. On Mon, 2005-06-20 at 18:42 +0200, Henrik Bach wrote: > Hi, > > Now, I've build the tools and the cfe. However, 'make check' gave me the > attached results.

Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm

Hi All, Googling X100P Clone I found several information about these cards and seems that some winmodem has the same chip used from the original X100P. Here below a list winmodem which should work as X100P clone: 1057 Motorola 5608 SM56 PCI Fax Voice Modem E159 Tiger Jet Network Inc 0001 Tiger 300/320 PCI interface I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the

Hi Reid, Now, I've removed the file and updated the source tree with this command: cvs -z3 -d :pserver:anon at llvm-cvs.cs.uiuc.edu:/var/cvs/llvm update -PdR llvm However, the file still exits. Henrik. >From: Reid Spencer >Date: Mon, 20 Jun 2005 10:57:54 -0700 > >Hi Henrik, > >You don't have the latest C/C++ Front End Source code. Please update >from CVS to get

Help! I can''t get TCNG to compile!!! It did this on 2 different machines! Here are the errors: -------------------------------------------- Kernel: 2.4.22 [root@localhost tcng]# uname -a Linux localhost.localdomain 2.4.22-1.2149.nptl #1 Wed Jan 7 13:08:26 EST #if KFULLVERSIONNUM >= 0x20416 /* gratuitous interface change in 2.4.22 :-( */ ERROR: ake -f Makefile.unclean tcsim make[2]:

Suddenly after recompiling my 2.4.22 kernel I can no longer load chan_zap: Sep 22 21:25:08 ERROR[16384]: File chan_zap.c, Line 5145 (mkintf): Unable to get span status: Inappropriate ioctl for device Sep 22 21:25:08 ERROR[16384]: File chan_zap.c, Line 6638 (load_module): Unable to register channel '1' Sep 22 21:25:08 WARNING[16384]: File loader.c, Line 301 (ast_load_resource):

Hi! I have just bought the X100P and TDM400P cards to install on my computer to implement the PBX. I also downloaded the newest softwares asterisk_ver0.5.0, libpri_ver0.4.0, and zaptel_ver0.7.0) to install on my computer (Red Hat Linux 8.0). All packages are compiled well. When I use "modprobe" to load drivers (modprobe zaptel, modprobe wcfxo, modprobe wcfxs), the first two (zaptel,

I downloaded the cvs development of zaptel... It seems to compile ok, but when ismod I get: lp:/usr/local/src/zaptel# /sbin/insmod wcfxo.o wcfxo.o: unresolved symbol zt_ec_chunk wcfxo.o: unresolved symbol zt_unregister wcfxo.o: unresolved symbol zt_alarm_notify wcfxo.o: unresolved symbol zt_hooksig wcfxo.o: unresolved symbol zt_transmit wcfxo.o: unresolved symbol zt_receive wcfxo.o: unresolved

When booting Ubuntu 6.06.1 (Linux 2.6.15-27-386), wcfxo would load but not configure. I have three ways to manually force wcfxo to configure: 1) ztcfg, 2) modprobe -f wcfxo, or of course 3) unload and reload wcfxo. Each works equally well. As a workaround, now I have to put ztcfg in rc.local, which Debian doesn't favour. I had compiled the same zaptel under Ubuntu 5.02.0 on two

I found similar posts regarding this error but none that answered my question. My zaptel.conf reads: fxsks=1-2 fxoks=3 loadzone=us defaultzone=us and /proc/interrupts: CPU0 0: 5542402 IO-APIC-edge timer 1: 2 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 3 IO-APIC-edge rtc 14: 72582 IO-APIC-edge

I have two X100P cards that were working just fine for months. When I run modprobe wcfxo today I got the following error: ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.19/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.19/misc/wcfxo.o: insmod wcfxo failed The output of dmesg said that wcfxo:Out of space to write register 06 with e0. What?s

Hello, my first post to the list. I have started to install and play with Asterisk. I was following some basic instructions to 'jump-start' my system. I have a TDM400P with one port and a X100P. I am running the latest CVS versions (from today). Following the steps I found for basic jump-start I did the following: Modprobe zaptel Modprobe wcfxo Modprobe wcfxs Edited