similar to: Allowing "pooling" or "rollover" for inbound calls on VoicePulse

I'm looking to set up multiple inbound Voicepulse Connect lines and have Asterisk route them direct to different IVR or Voicemail based on the inbound number that is called. Unfortunately, I just can't see how one would go about identifying the number that is being called. Has anyone been able to do something like this with Voicepulse? I appreciate any assistance. Phil

Hello- I'm obviously doing something wrong here in trying to get an inbound DID to work with voicepulse. I have an outbound context set-up for those calls in iax.conf, and the appropriate register in- statement. within extensions.conf I am doing something like this: exten => 212xxxxxxx,1,Dial(SIP/admin,t) (where admin is the phone i am looking to forward to from sip.conf). i'm

Greetings, I have been experimenting with Asterisk for a few weeks and finally decided to take the plunge and purchase a few DIDs for inbound calling. Our attempts at IAX/IAX2 connectivity with VoicePulse have been less than successful. We get "Registration Refused" errors from Asterisk whenever we launch the server. The front-line support folks at VoicePulse suggested that we are

I have two questions regarding number portability... 1) If I port a DID over to Voicepulse, can I then move that DID elsewhere somewhere down the road. Or does voicepulse now OWN that DID? 2) Can I take a DID assigned by Voicepulse and transfer it to someone else? If not, why? -jwb

I recently switched from BroadVoice to VoicePulse Connect on my Asterisk box. Too many Meetme quality complaints (whether real or perceived). I had to make a choice to use IAX2 or SIP with VoicePulse. I first tried to go with SIP because I already had it working and all of our devices are SIP. Problem is that every time I turn my back, the Asterisk registration with the VoicePulse SIP server

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

Is there anyone out there who has VoicePulse Connect working with DTMF? I've been unable to get it to work from the start, and the recent VoicePulse updates did not help. A caller to my DID's hears Asterisk, but pressing DTMF does nothing: On call setup "iax2 debug" shows: ----------------- Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK

I'm having trouble configuring these services the way I want. Basically I prefer using iLBC before GSM, however Iaxtel only want to talk GSM. It _seems_ that Voicepulse prefers GSM also, because even if I put ILBC before GSM in the "allow=" part of iax.conf, if GSM is mentioned, Voicepulse will use it. If I don't allow GSM Voicepulse will use ILBC. Does anyone know how to

I can't seem to dial out with Voicepulse Open Access service using *. Incoming works fine. Another user posted a few weeks back that they were having problems and there are some threads at dslreports.com about this as well. Maybe someone here can figure out what the issue is from the sip debug info below. I am at a loss. The audible error message from Allison is 0984 (from VP server) Here is

Hello: I am new to the list. I am trying to set up asterisk with voicepulse. I have a voicepulse username + password, and SIP DID. When I login to voicepulse, I have this under my devices tab: Devices *Login:* Sysxxxxxxx *Password:* xxxxxxxxxx *Context:* VPWS *Connects to:* gw5.voicepulse.com My question is: Do I need a 2.4.x kernel? Currently I am running Debian/stable stock 2.2.x ? Has

Has anyone been able to get * working with VoicePulse OpenAccess (SIP not IAX). I have found a ton of information about VoicePulse Connect but very little on the proper * settings for OpenAccess. Tried contacting VP with no response. If anyone has this working, can they share their extensions.conf and sip.conf files? Better yet, if it could be posted on the Wiki. Keith

Hi all, I'm running Asterisk 1.0.0. I am a customer ( and supporter ) of voicepulse. For me, it works perfectly, but one of my customers noticed a small problem: During a conversation, when the otherside isn't talking, it's almost like the mic turns off. Not that big of a deal I know, and the more I think about it, the more this seems a voicepulse issue. But in the off

Dear Sirs, Anybody ever tried running SIP up against Voicepulse? On their http://connect.voicepulse.com they claim they support both SIP and IAX, but I can't seem to get SIP running. I have as mentioned before on this list - huge problems getting any timing devices running on some of my machines, so IAX is not really an option right now. If I try I get a "Service Unavailable"

I don't know if this has been mentioned yet: Voicepulse is now offering wholesale pricing and IAX2 connectivity for Asterisk users. No fees, pay as you go. They also offer incoming calls for $7.99 per month. See wholesale.voicepulse.com.

Hi, for some weeks now I have been unable to make calls via my voicepulse connect IAX account? When I attempt the console looks like this:- rt*CLI> -- Executing Dial("SIP/2008-cf55", "IAX2/NBhXXXXXX:XXXXXXN82@gwiaxt01.voicepulse.com/12124565900") in new stack -- Called NBhXXXXX:XXXXN82@gwiaxt01.voicepulse.com/12124565900 -- Call accepted by 66.234.228.160

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

I've been using my voicepulse connect number for over a month now, but today it simply won't connect. My partner and I each have a number, both are mapped in my iax.conf and extensions.conf files. This has been working fine. Today, either number gives this message: Feb 16 21:53:14 NOTICE[4330]: chan_iax2.c:5757 socket_read: Rejected connect attempt from 66.234.228.170, request

I have a DID with VoicePulse Connect, but the sound quality is horrible, it is often choppy and the caller's voice cuts out for 2-3 seconds at least once a minute, I have contacted VoicePulse many times, and they do not do anything about it! Does anyone have any similar problems? It isnt my Asterisk config because I have 0 problems using NuFone.

Just a quick couple of questions for ya'll. 1) Does anyone know if VoicePulse Connect will be supporting dtmf tones? I have had a terrible time getting a hold of anyone over there, and I need this functionality before I can migrate to * completely. 2) Are there currently any problems with inbound DID's? Everything is setup properly in *, but I am not able to receive inbound calls,

We are developing an IVR application and when I am testing locally on my machine using a softphone (iaxcomm) the digits I press for GET DATA work every time. I am testing with a local extension that goes right into my routine. However when I try to call in to the system using an analog or cell phone GET DATA drops some digits that are pressed. There doesn't seem to be a pattern to which