similar to: voiptalk.org IAX service - user experiences

Ive just installed a TDM4000P with 4 fxos. The zaptel config is fine, zttest comes back with configured. If i call a line when zttest it shows on the display,and then goes when the line drops. In * when a call comes in, it follows my dialplan and answers the call according to the log, but IT DOESN'T actually pick up the call, i.e. it continues ringing. I'm using KS signalling, and

Hi all My * implementation is working brilliantly with only one small fault left to kill. I'm using IAXTalk from Telappliant for my incoming/outgoing calls to the pstn network; if I set my codec to GSM everything works great - no pauses but quality is a bit poor. If it set the codec to alaw (I think I'm using the correct one - I'm in the UK) I get intermittent pauses on the call.

Hi, I have installed the latest version of asterisk(1.4.0-beta3), and built app_rxfax/txfax. I'm using spandsp from here, http://www.soft-switch.org/downloads/snapshots/spandsp/spandsp-20061207.tar.gz Everything builds ok. I had to manually apply the patch from the site so configure would spot spandsp libraries. However, when I try dialing my virtual fax extension (either from a phone or

Hello folks, i upgraded to the actual CVS head from yesterday (27.5.) but can not get incoming SIP calls from my provider (sipgate). If someone calls my number, my asterisk responds with the following error: May 27 21:30:21 NOTICE[1114606512]: chan_sip.c:6351 handle_request: Failed to authenticate user "<CallerID>" <sip:<CallerID>@217.10.66.11>;tag=as38e9693c I

Hi everyone I'm interested in using the Telappliant/voip-talk offering as an alternative to my DDI analog problem. (see [Asterisk-Users] Multiple DDI & Hunting on Analog Lines (UK) for details) Does anyone on the list have any recent comments on reliability etc? I would really appricated some positive and negative comments. Cheers Matt

Does anyone know of a BYOD provider that terminates calls to NCFA numbers (UK 'national rate'). I enjoyed broadvoices unlimited to those numbers, but this is getting silly now, it doesnt work and no answer if after switching to a new provider it will ever work. Can anyone suggest an alternative provider that serves NCFA? -- Trixter http://www.0xdecafbad.com UK +44 870 340 4605

Hi, Despite much searching, I can't find anything quite like the problem we seem to be experiencing with our recently activated asterisk pbx. Of four people answering several calls per five minutes, I have reports of the occasional call starting with dead air. The user picks up the call from the queue, and they can hear that the line is too quiet. If they start talking, the caller either

I went on a service call yesterday to find an asterisk system with a T100P card on a Qwest PRI and a TDM40B card connected to fax machines. The TDM40B LEDs were not lit, and the system did not respond to keyboard input. However, calls were being processed for the PRI and 7960 phones. I replaced the TDM40B card with a new one, and the system now seems to be ok. But I'm wondering, why

Hello Everybody, I was going thru the C code of Asterisk. Does anybody know how does one go about modifying the C code of Asterisk? Please do reply. Regards, Bharat M. Sarvan EZZI BPO Pvt Ltd., PUNE. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to get asterisks to work with http://www.voiptalk.org 's IAX service. I have configured asterisks as per their instructions and am using the x-lite soft phone. When I get an incoming call the softphone rings but the caller (from pstn) gets a recorded message saying the number is unable to accept calls at present. Does anybody know what might be causing this? Thanks

Hi, I've looked at the Wiki for this, have seen the Swift.agi details, but has anyone got a current script for Cepstral and an example of integraton in * please? I'm a * and linux newbie, so please be gentle ;-) Thanks John

I'm not sure if this is a -users or a -dev question, since the answer probably comes down to something in the code. I'm running the latest CVS-STABLE, and am subscribed to PSTN service using IAX2 via Voiptalk in the UK. I've just been alerted by a customer that the sending of DTMF from my asterisk box to a remote PSTN user doesn't work, although it used to. To test it, I have

I have several of incoming numbers on IAX from voiptalk and magrathea but have a problem with IAX.conf. If I follow the example from voiptalk [VoIPTalk Incoming Number] type=friend username=VoIPTalk Incoming Number context=[XXXXXXXX] and make incoming entries in IAX.conf for the numbers like below with a different entry for each number pointing to a different context, incoming numbers always

There was some discussion on this list recently about the voiptalk silver service. I've just had an e-mail from them saying that the price has been reduced to 2.99 per month. However, they still only provide an 0870 number whereas pipecall provide a local call rate 0845 number in the fee. Chris

Hi, I've got Outlook to call the number on * using the TAPI interface documented on the Wiki. Its working OK. I have downloaded the Indentapop application, and it appears to connect to * Ok using the Debug modes, but It isnt detecting incoming calls. Has anyone git identapop working? Care to share configuration details? Thanks

Trying now to set up the final part of my * switch. I must admit I've had great fun over the last week or so playing with it, and would like to thank you guys for all the assistance (past and present, since I've been trawling a lot of old posts!!!). Scenario - using voiptalk.org to supply the incoming gateway, tied to an 0845 number for convenience in testing. Internal 7960 -> 7960

Hi, Currently using voiptalk.org and the quality is getting really bad. I would like a second provider preferably in UK, anyone got any suggestions? Ta. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040421/3d91c7f6/attachment.htm

Hi, I am looking for voip termination all over the world especially based on IAX or SIP. Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040124/25e16736/attachment.htm

Hello folks, I'm having trouble configuring Asterisk to play an "invalid extension" message to anyone dialing an undefined extension. First I tried using the 'i' pseudo-extension, but it didn't work at all; searching the wiki I found that page: http://www.voip-info.org/tiki-index.php?page=Asterisk%20i%20extension where it basically says that the 'i'

I'm not having any trouble with interrupts, but here's my /proc/interrupts on Fedora Core 2 on a hyper-threading CPU and using the SMP kernel (2.6.5-1.138). I don't think I need to worry about uhci_hcd, nothing is plugged into USB, but libata is the disk driver. How do I get libata and wctdm to use different interrupts? $ cat /proc/interrupts CPU0 CPU1 0: