similar to: Making an ISDN call via Asterisk?

Not sure that's an accurate subject line, but... I've started looking at Asterisk as a possibility for a small PBX here. I'm thinking of an ISDN (BRI) card for connection to the telco, with some analogue converters (Sipura) for existing phones too. I'm pretty sure that the functionality I want is all there (and then some!) but am not clear on one point. At present, I'm

I'm trying to connect an asterisk server via oh323 to a Lucent iMerge. I patched the code due so that Lucent can handle asterisk's ver4 h323 http://www.voip-info.org/wiki-Asterisk+Lucent+iMerge+Configuration I can now successfully dial in to our company over multiple lines. The issue is when I dial out The first outgoing call connects to an outside user A The second call drops the first

I'm looking for someone familiar with setting up some of the more advanced features of the Lucent TNT, preferably someone with knowledge of Trunk Groups and choosing outgoing PRI channels based on call type and perhaps NPA-NXX We currently have 8 PRI's. 7 of them are for our dialup pool, the 8th is for our voip. We currently run the dialup PRI's to a seperate TNT We want to

Hello All. I am trying to use RAGI the ruby agi framework with trixbox. I am having a problem with the dialout part. The RAGI framework creates a file in the /var/spool/asterisk/outgoing directory and routes the call to an extension (I have listed the relevent portion of the file below). The problem is that the initial dial command does not execute properly in trixbox. I am hoping somebody who

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Troy Settle > Sent: Wednesday, September 14, 2005 7:03 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] MAX PRI for single server (was:Not > enoughlinesavailable for Asterisk implemetation)

In Australia, Telstra, the local telco provides isdn modem for isdn connection. The modem has 2 analogue telephone jacks and a serial port for connection to dialup internet. My question is that will it be possible to use Zaptel TDM02B to connect to the analogue jack instead of getting a fritz card to do the telephony. Will there be less feature if doing so? -- David Kwok, CISSP Tel: 612

Hello. Has anyone been able to successfully make data (dialup modem) calls through a TDM2400E? We're able to make fax and credit card calls fine, but cannot successfully make modem calls using a 56K modem connected to a patch panel connected to an FXS port which then gets bridged to an FXO port connected directly to a phone line. We have 'echocancelwhenbridged=no' set in

> I've got a Lucent TNT that I'm using for a gateway. Its working fine, but I > have one problem. I cannot find any place to set a ring timer, or number of > rings. The calls seem to timeout (Goes to all circuits busy) after about 15 > seconds - which isn't enough time for some voicemail boxes to pickup. I > found a setting called ringing-timer under sip-options, but

Hi All, Many thanks to Marc who helped me with a previous Capi Dialout plan - however..... What I now would like to be able to do is: - We have 8 msn's 383590, 383591 383592 etc. What I would like to do is set up an If Then Else type statement along the following lines: - If extension 7957 Then Dialout on Capi msn 383590 ElseIf extension 7958 Then Dialout on Capi msn 383591 ElseIf

I sent this out about a week or so ago, but I have heard nothing. I am *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX settings for both machines are *exactly* the same (the stock defaults for a standard CentOS 6 install). The *only* difference is that the desktop (sauron) has a few VMs setup (under KVM) and the laptop (gollum) does not. The desktop has an AMD

Hi, I am having some trouble with ISDN Dialout. Using a Netjet-s PCI Card. When in Minicom, the only way I can dialout is if i issue ATS18=1 First. Otherwise I get a BUSY message. So thats fine. But when I dialout from asterisk, I get an immediate hangup, so my guess is that asterisk is not issuing ATS18=1 to the ttyI device. Here are my configs, any input would be greatly appriciated.

At Sat, 13 Feb 2016 10:14:30 -0500 CentOS mailing list <centos at centos.org> wrote: > > I sent this out about a week or so ago, but I have heard nothing. I am > *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX > settings for both machines are *exactly* the same (the stock defaults for a > standard CentOS 6 install). The *only* difference is

Hi, Is there a simply way to allow dialout from ISDN modem to outside number through Asterisk? I've got an server with an Asterisk and the following cards: 1. TE110 -- to telco 2. TE400P with one FXS to analog phone 3. Two HFC-S based cards in NT mode I'd like to connect ISDN modem to one HFC-S card and allow dialout through TE100 to some external number (being more precisely, to some

Hello! We are using the Digium 405PP card, and getting the following messages: Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 8 on Primary D-channel of span 1 My config file is below. We are trying to set up D-Channel on channel 24, 1-23 in trunk group 1,

I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1. Try /dev/ttyUSB0 ? - Mike On Sat, Feb 13, 2016 at 10:14 AM, Robert Heller <heller at deepsoft.com> wrote: > I sent this out about a week or so ago, but I have heard nothing. I am > *thinking* it is a SELINUX problem, but I cannot figure out what. The > SELINUX > settings for both machines are *exactly* the

Has anyone managed to get Asterisk to work with any of the Alchemy or Cybergear ISDN switches? Cheers Matthew

Hi Everyone, So I have been further exploring the integration of our asterisk server and our lucent definity g3si system. I took the suggestion of setting up an isdn-pri line added the two way tie trunk and the signalling group, but can't seem to get the PRI signalling working on the asterisk correctly. I've set pri type to network on the lucent, and pri_cpe in zapata on the asterisk, but

Hello all, New to the list, Asterisk and this wonderful world of convergence. From reading the docs, list and websites I hopefully correctly understand that I can use a plain cheap isdn4linux supported ISDN (passive) TA to hook up the PC to the ISDN line from the telco (FXO card?). Next in the PC I also need a FXS card like a Digium TDM10B or PhoneJack so I can hook up an analog phone to it. In

I know almost nothing linux, and don't really know that much about Asterisk (proper).. but I was 'pulled' by this subject and grabbed an <mailto:Asterisk@home> Asterisk@home installation CD (version 1.3) and just went with it. Newbie doesn't quite describe it, I'm a banker.. this simply goes to show how easy Asterisk is becoming (I certainly hope this direction was meant

Hello my name is Ilija Poznic and I have a problem. My configuration is 1. Digium TDM4000P with one FXS. 2. AVM Fritz ISDN adapter (configured with capi). When I connect to my ISP and then start *. Asterisks is registering me to SIP provider iconnect. After that I can call international call trough VoIP. My problem is that I want to dialout to ISP only when I have a international call.