similar to: Can I receive faxes with Fritz card & Asterisk ?

Hi, answer is probably obvious, but couldn't find it... Thanks, Rob.

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then

Hello everyone! Has anyone had success in configuring the "Fritz!Card DSL" card, a combination of an ISDN adapter and a DSL modem from the german AVM GmbH (http://www.avm.de/) in a dom0 Domain (Xen 2.0.7)? I had success in compiling the modules from http://www.avm.de/de/Download/index.php3 and they load fine with "modprobe fcdsl". But with the Xen dom0 Kernel they seem to

Hello I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I have choppy sound problems sometimes, and echo problems often. I am using a 2 port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000 I read that changing to BriStuff will fix the echo problems, but have also read other users say that the only way they solved the echo/choppy sound problems was using a Fritz ISDN

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

Hi, I'm experiencing a quite strange behavior while trying to receive faxes through Asterisk (either directly through app_rxfax or with spandsp + hylafax). Config: HFC quad BRI card (3 T0 connected to the card) Asterisk 1.4.21 asterisk-app-fax 0.0.20070624-2 hylafax 2:4.4.4-10.1 libpri 1.4.2 libspandsp3 0.0.4pre16 /etc/zaptel.conf loadzone=fr defaultzone=fr span=1,0,3,ccs,ami

Hi, I have an Asterisk CVS-HEAD-08/29/05-13:21:43 built on a Redhat 9. I have problems to receive faxes with spandsp-0.0.2pre11 and libtiff-3.5.7-11. I'm trying with a fax machine Panasonic KX-FT25, 14.4Kbps modem speed. I have tested sending a Fax document from Asterisk to the fax machine, it is working fine, but when I try to receive with asterisk, I receive transmission error on the fax

Guys. Ive been testing how to receive faxes using TDM400P cards and so far, after playing with gains, echocancell and echotraining on zapata.conf.. Ive ha dno luck, faxes come in as garbage or broken or with blank lines. Anybody has successfully done this? Any tips.. Also I have some ideas: 1. Is it really possible to get fxes on a fax machine using ATAs like the sipura 2002? Even using ulaw

Hi, Can you tell me how to configure Hylafax + Asterisk in order to be able to receive/send faxes. Best regards, Guan -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050718/a1c6a47b/attachment.htm

Hi, I'm trying to setup a system where incoming faxes are received using SpanDSP and then send on to another (remote) fax machine. The SpanDSP part is working excellently, however I dont seem to be able to get the forwarding part to work. Heres what I put into my extensions.conf: exten => s,4,Answer() exten => s,5,Set(FAXFILE=/tmp/fax-${UNIQUEID}.tif) exten =>

Hi list, i'm keen to move to Asterisk 1.6, so really need to update my system which is running Mandrake 9.2 although it has been solid for years, fo Fedora 8. I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel drivers from ATrpms (http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm)

does anybody know a good tutorial on how to setup asterisk to receive faxes (no need to send them) ? i've tried using "app_fax.so" with T38 but i keep getting "Transmission failed" -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110503/5025a050/attachment.htm>

Hello, Has anybody installed 2 Fritz pci cards in an asterisk box ? I can't make them work : each card is working fine when installed alone (with chan_capi), but I get a kernel freeze when doing 'insmod' with both cards installed. I am using Mandrake 10.1 with kernel 2.6, so the hack described at http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used (the hack requires

I've put my fire proof suit on ready to ask a question ;o) Redhat 9 Kernel 2.4.20-8 AVM Fritz PCI Problem 1... i have followed instructions from:- http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI (Plus many many other sites found via google over the last 16 hours) after modifying the makefile & defs.h,

Is case anyone wants to know... The Fritz! USB ISDN box works fine with Asterisk! I'm running CAPI 0.3.0 and love it, because the mini ITX server I have only takes one PCI slot which is now filled with a 4 port Digium card.

Hi Everyone, Long time reader, first time poster. FINALLY got my First AVM Fritz Card up and running under Centos 3.4 Installed the second....modified the drivers etc as per the instructions found at the wiki System boots Modprobe capi all good modprobe fcpci all good modprobe f2pci the kernel then goes into Panic If Modprobe f2pci before fcpci the kernel still goes into panic.

Hi, I've been having problems getting Asterisk to work with a fritz card (in ptp mode). We've managed to get everything configured, however, as soon as the call is connected we get "Unhandled message: prim 281 len -22 from addr 1000000, dinfo 0 on this port" I checked, and mISDN_dsp is loaded. Any help would be much appreciated! Regards, Chris Jones // Network Administrator

Hello, Using Fritz 5.32 with wine (and ubuntu breezy), I can't see the BMP pictures. Fritz 5.32 is free and downloadable here : http://www.pcgo.de/aktuell/ausgabe0103/fritz.zip I need help Thanks

> > That is possible, how could I check that? > > I can see that IRQ 17 is shared between eth0 and my fritz!card > but I > > don't know if it changes anything: > > Can you try it (or eth0) in a different slot (or change IRQ's in the > BIOS if possible) to see if it makes any difference? That's the > only way > to know for sure, anything else is

Who mentioned fax? :-) Native CAPI isn't an option for us (unfortunately), as our service is a point-to-point service, which the AVM CAPI drivers don't support. We've now got another problem -- we're now able to make calls -- once. The kernel panics as soon as someone terminates a call (and, so it would seem, at various other times too). This has only been occuring since mISDN