similar to: ArtDio IPF-2000 or Sipura SPA-841

Hello, I recently purchased a ArtDio IPF-2600 phone from voipsupply.com, but they did not include a manual. Does anyone know the default login information? I have tried all of the common ones that I can think of. If anyone knows, it would be greatly appreciated. Thanks! _________________________________________________________________ Stay in touch with old friends and meet new ones with

The issue appears to be between the Cisco 7940 and the ArtDio IPF-2000, when a call is initiated between these phones the ArtDio phone receives the audio stream fine from the Cisco, but the Cisco can't hear anything from the ArtDio, until the Cisco user places the call on hold and then picks the line back up. When the Cisco user places the call on hold, music streams fine from the server to

Hi All, I am trying to creat a simple example byusing ipf function in R, but i could not get it succefully...I am very new to R, does anyone could help, to instruct me about this ipf fucntion? Actually, this is what I mean 50 | 50 ---------------------- 33.4| 28.57 | 14.29 33.3| 23.81 | 4.762 33.3| 9.523 | 19.05

I have been looking around for VoIP providers but have not found a good listing. Is there no "yellow pages" for VoIP providers? Google mostly returns services like Vonage, Packet8, NuFone, ect. None seam to be very reseller friendly and none offer LNP or local DID's for my area. Anyone know of a list (even a partial one) Jeromie Reeves

Froogle found me one supplier for the SPA-841, not sure I trust them though. Does this phone even exist yet? Does anyone have any experience with it? Does anyone know a vendor other than Atacomm/voipsupply?

Hi I have a 3 x 2 contingency table: 10 20 30 40 50 60 I want to update the frequencies to new marginal totals: 100 130 40 80 110 I want to use the ipf (iterative proportional fitting) function which is apparently in the cat package. Can somebody please advice me how to input this data and invoke ipf in R to obtain an updated contingency table? Thanks. By the way I am quite new to R. -- Dr

I've had ipf working on a few 5.3 servers for quite awhile. Not too long ago some developers had to do some coding work and were coming from dynamic IP's. I (reluctantly) opened up SSH to the world. Immediately I started seeing the attacks where bots of some sort would try to break in with a variety of different users. So, I (thought) I closed it up again and told the developers to use a

FreeBSD 4.8-STABLE #1: Sun Apr 6 09:38:34 EDT 2003 # $FreeBSD: ports/www/squid/Makefile,v 1.99 2003/03/09 10:59:07 netchild Exp $ ... checking if IP-Filter header files are installed... no WARNING: Cannot find necessary IP-Filter header files Transparent Proxy support WILL NOT be enabled ... I seem to recall that ipf doesn't install its includes per default any longer ? Perhaps

Just rebuilt and installed/world kernel: FreeBSD 4.8-STABLE #0: Fri Apr 11 14:34:37 EDT 2003 Using the latest Makefile for squid25: # fgrep \$FreeBSD /usr/ports/www/squid/Makefile # $FreeBSD: ports/www/squid/Makefile,v 1.100 2003/04/09 08:31:30 adrian Exp $ Modified with: # fgrep CONFIGURE_ARGS Makefile |fgrep -v \# CONFIGURE_ARGS= --bindir=${PREFIX}/sbin --sysconfdir=${PREFIX}/etc/squid \

Hi. On my FreeBSD 4.8 configured IPFW2+IPF+IPNAT and I use them all: - IPFW - traffic accounting, shaping, balancing and filtering; - IPFilter - policy routing; - IPNAT - masquerading. I want to know, how IP-packets flow through all of this components? What's the path? incoming: IPFW Layer2 -> IPFW&Dummynet -> IPNAT -> IPFilter ? outgoing: IPFW Layer2 ->

Can anyone point me in a good direction for configuring SIP through a PIX using 1:1 NAT. I have read anything I could get my hands on and tried them all with very little success. I can get it to work through the cheap little cable modem routers, but not this PIX. I -can- make a direct SIP call using the IP address of the * server (ie.exten@ipaddr), but when I do that * still doesn't

Hi, first i must tell you, that my english is not the best, i hav learned my english from manpages and documentation. Please excuse this. I have setted up a Box w/FreeBSD 4.7-RELEASE for connecting to the w3 through an DSL/ATM-Connection. Now i know the stateful handling of firewall-rules under linux with iptables.In the second i have understand that FreeBSD comes with the netfilter-extensions.

> -----Original Message----- > From: Christopher [mailto:chris.robinson@voipsupply.com] > I see that there is a lot of discussion on the web about a > common error > after installing and modprobe'ing the zaptel driver. However I don't > see any resolution, anyone found a solution? > > Here's the output I get after modprobe: > > Uhhuh. NMI received.

HI all, I have the following setup running: EP<--->Calling Asterisk<--->Relaying Asterisk<--->Softswitch<---> PSTN The Endpoint EP is registered with the Calling Asterisk. Calls are forwarded from this machine to Relaying Asterisk which in turn forwards it to the Softswitch. In addition, this machine also relays back responses from the Softswitch to the Calling

Hi, we've proof of conecpt system for speech recognition on Asterisk. We would like to send results of recognition back to user in standard way. Currently we're considering using sendtext command and it works with Firefly. But I'm curious what soft or hard ip phones that can connect to Asterisk support such feature ? Also what softphone would be most suitable for further work in

Hela, When I call my sip phone the phone rings and when i answer it all works great however while the phone rings the caller doesnt hear the 'beep, beep' I've had this before and fixed it too bad i can't remember how I did it , Anyone any suggesstions ? some specs : Freebsd 5.3 Asterisk 1.0.6 Phone : ArtDio IPF-2000 -Armand

I am going to buy some IP phones from them but I sent them an email couple of weeks ago and got no reply. Has anyone ordered anything from them? Any other places that I can buy from? Sorry if it's a wrong post. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050517/ba256d25/attachment.htm

Hello. I am a relatively new FreeBSD user. I have samba, ssh and vnc server running on it. I am also trying to set up the IPFILTER on it. I used the handbook to familiarize myself with the software and the sample script provided in the chapter discussing ipf, I decided to use as a starting point. After reading the ipf chapter I assumed that if "block in log first quick on xl0 all" is

This issue only happened on creating VTI domain in IPF platform. Creating IA32 or IA32E VMX domain is okay. Best Regards, Yongkang (Kangkang) 永康 >-----Original Message----- >From: xen-ia64-devel-bounces@lists.xensource.com >[mailto:xen-ia64-devel-bounces@lists.xensource.com] On Behalf Of Zhang, >Jingke >Sent: 2006年10月11日 16:35 >To: xen-ia64-devel@lists.xensource.com

Author: jojemann Repository: /hg/zfs-crypto/gate Revision: aa51fc8a43798383cb3ead8c97bcad88acd305c5 Log message: 6283314 frequent panics in ipf:fr_movequeue: NULL pointer dereference 6294902 ipfilter doesn''t recognize TCP window scale option correctly. Files: update: usr/src/common/ipf/ip_state.c