similar to: caller-id blocking

Hello, on my ISDN phone I can configure that on the next outgoing call, my telephone number should not be transmitted, instead it should be UNKNOWN. How can I configure Asterisk to do the same? Is this a feature/parameter of the driver (chan_capi) that I'm using? BTW: I'm using ISDN and Deutsche Telekom, if the provider makes any difference. Thanks for your help, Stefan --

Hi, how can I setup asterisk to use the number presentation bits on the isdn side to suppress the number presentation? We need to transmit the subscriber number for billing purposes via ISDN whether or not the user wants to hide his/her number. Is there any way to do this? Deti

I've just upgraded to the latest CVS head, and my outbound calls stopped working. I traced it back to the line exten => s,9,CallingPres(${ARG2}) It seems as if this application is now missing. I tracked back the changes and found in 1.415 of chan_zap.c the code was removed because it was "duplicated". However, it does not exist anywhere ! Am I being stupid, missed

hi all! I'm running an Asterisk-box with bristuff-....RC8n and 2 HFC-S cards. I m located in Vienna/Austria. I have the problem that on outgoing calls i hear my voice as a short echo (about half a second). This occurs not on every call. I tried some changes in my zapata.conf, with rxgain and txgain settings, but to me its hard to find a configuration which is good for every call i make. Is

Hi, I am using: Asterisk 11.2.0 libpri 1.4.12 Dahdi: 2.6.1 Sangoma E1-Card with Wanpipe-Drivers 3.5.28 I call my asterisk box via SIP and connect the call to an AGI-Script. Within the script I do EXEC SetCallerPres prohib or EXEC SetCallerPres prohib_not_screened But I get the following error: ast*CLI> == Using SIP RTP CoS mark 5 -- Executing [100 at sip:1]

Michel Send me the same output for a dial string that only sends the *31* Is this an ISDN line? What type of card/signalling/switchtype are you using? It looks as if the PSTN switch accepts the *31* and then hangs up so you can make the NEXT call with the *31* feature enabled. If so I assume the *31* feature will be enabled for the next call on the ENTIRE SPAN if it is an ISDN trunk group. If

I am using VoiceOne http://voiceone.it/ as my management interface. I am not 100% sure when it started, but my CDR is now full of "s" as the DST instead of the actual dialed number. As I understand it - it is because it is being recorded in the CDR while in a macro (as below). Is there any work around so that I can record the actual dialed number? [macro-dialout] exten =

Hi, Using * 1.2.5 with a euro_isdn PRI I need to hide the callerID on certain extensions. I have usecallingpres=yes in zapata.conf, and am using SetCallerPres(prohib) in my dialplan prior to the Dial command. No matter what I set SetCallerPres to the CID is still displayed. Is there something else I need to make this work? I can't just set the CallerIDNUM to null, as it is needed for

I am trying to setup one time caller id block on my system(activated when an incoming call matches *811XXXXXXXXXX), and I have had little to no luck. Could you take a look at my context/macro definition and help me figure out what I am missing? Here is my context for my dialplan: include=default plancomment=user-default

Hi, I've run into a minor snag trying to pass on CALLERID presence from one Asterisk to another via SIP (both running 13.16.0) I have a PRI coming in PBX_A and PBX_A is connected to PBX_B via SIP. PBX_A gets PRI calls on a 4 port Digium card, and each call naturally has its own callerid values and presence. I pass on those calls to PBX_B via SI, and I'm trying to pass on this

Does SetCallerPres(Prohib) remove the ANI data from a SIP call or does it simply set a flag telling other devices not to display the data? In other words, could another system override that and see the caller ID anyway? The answer may affect how I handle 911 calls, so I'm very curious.

I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an

hi list, I set up a new asterisk machine with asterisk 1.2.13 and misdn 0.3.1rc27. I use an e1 card with sip clients. My extensions look like this: [E1] <snip>...<snip> exten => 33006733,1,Set(CALLED=${EXTEN}) exten => 33006733,2,Dial(SIP/1@192.168.0.23) exten => 33006733-ANSWER,3,Answer() [SIP] exten => _X.,1,Noop() exten =>

Hello, Is it possible to set a variable in dialpan when the someone calls a particular DID number so that i can use that variable for calls coming to that number only. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100819/25402ade/attachment.htm

Hi, I am using asterisknow 1.5.0 and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. I think the same problem listed here: https://issues.asterisk.org/view.php?id=6683 There is one patch on this link but i don't know how to apply patch on asterisknow.

I have a little call recording script that I am running and it works fine, but I have one problem. I get CDR when a user calls into the extension, but I do not get CDR for the call that it makes outbound on # 17. Any idea why? Here is the extensions info: [default] exten => 2211,1,Answer exten => 2211,2,Wait(1) exten => 2211,3,Playback(/etc/asterisk/recording/getshop) exten =>

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

Hello all, I would like to use Asterisk to add/modify SIP headers in the INVITE message, to include Privacy information, if the INVITE includes a *67 prefix (or another predefined prefix). That's an example of the INVITE I get: /INVITE sip:*6700112233445 at 192.168.1.100 SIP/2.0 From: "123456789"<sip:*123456789*@192.168.1.100>;tag=333333333 To: <sip:*6700112233445 at

Hi all, does anybody know how to make on-demand anonymous calls? I've tried code *67# before the number to call but it is working with some providers only. Any hints? Thank you.

Hello list, I notice that the dialplan method SIPAddHeader is not working : in dialplan : /exten => s,n,SIPAddHeader(Privacy: id)/ in SIP invite no trace of this header : /INVITE sip:0473 at sip.domain.be SIP/2.0 Via: SIP/2.0/UDP 192.168.1.106:5063;branch=z9hG4bK-5b2b1b97 From: "VC" <sip:voip2 at sip.domain.be>;tag=729476652f511c67o2 To: <sip:0473 at sip.domain.be>