similar to: Asterisk in parallel with PSTN

Hello, Could anybody tell me if there is a Linux distribution (or Kernel version) that works better with Asterisk. I am newbie and I don't know if there is a preferred Linux/kernel version for Asterisk. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040904/8798ff25/attachment.htm

Would anyone care to offer opinions as to the FXO interface which sucks the least :) I have an application in which it appears I must route certain calls out an analog PSTN line. Presently, I am testing an SPA-3000, but I can't seem to get the echo heard on the IP end of the call down to a non-annoying level. Any suggestions welcomed :) -Dorn

I have a nice used zhone channel bank I want to experiment with, but need a T1 interface for my * box to do so. The TE410P looks nice, but more money than I want to spend to experiment, and I don't need 4xT1, only 1xT1. Are there any good 1xT1 PCI cards that are recommended? Regards, -Dorn

I'd like to get VM_CALLERID to include number in addition to name since often when calls come from cell lines or various other, the name is just a city, state and the number would be more usefull. Is there a way to get the number in the VM_CALLERID string, or is there a second variable I can use in formatting email vmail notifications to get the number? Regards, -Dorn

I just installed a new TDM400P with one FXO interface in slot 4 (how it came from Digium). This box is running Debian with a 2.6.10-rc2-mm3 kernel. After the make linux26 and make install in /usr/local/src/zaptel, I can see contents in /dev/zap but any attemp to touch for example /dev/zap/ctl gets a no such device or address ... Any suggestions?

Hello , I learn handbook-draft.but I think I don't understand asterisk. where I can find some learning book about asterisk? thank u. B.R. John. -----????----- ???: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]?? asterisk-users-request@lists.digium.com ????: 2004?12?24? 7:51 ???: asterisk-users@lists.digium.com ??: Asterisk-Users Digest, Vol 5,

If I have a call coming in on one line and then I am using Dial to send it out to another outside line, is there a good way to get separate CDR for both call legs? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060317/ac95b2fc/attachment.htm

Has anyone had success with the TDM400 in production? I have multiple boxes where these cards lock up and the only thing that will fix them is to unload *, modprobe -r wctdm, modprobe wctdm, load asterisk. Does not matter if it is a FXS/FXO module. I know this topic has been discussed many times before, but my questions is not "is anyone else having this problem" since I know that

I just received a Wildcard TDM400P by FedEx yesterday. I noticed that the FXO/FXS modules use connectors similar to Ethernet. Now, i want to connect the TDM400P to the PSTN connector in the wall, and also to a regular analog phone. Both the PSTN conn and the phone use smaller connectors, typical for analog phones. I searched the "official" docs and the Wiki, there's good

Anyone knows where can I find spandsp? Official site seems permanently down... TIA, Simone.

>Asterisk and it works fine untill the following >situation: > >- one of the telco lines occasionally becomes mute after call is completed, would not provide dial tone, (not sure about ringing on that >line) - both via old and new PBX. >- zap show channel <n> would show that line as 'Offhook', though no telephone is off hook. > >If physical line would be

I can't install freebsd 6.0 STABLE amd64 on my notebook: HP Pavilion 2420la AMD Turion ML 32 , 1024 RAM, 80 GB HD, ATI Radeon XPRESS 200M. I try all modes , default, whitout acpi, safe mode. In all the cases after the next message the installation doesn't work: timecounters tick every 1000 msec Linux ELF exec handler install lo0.bpf attached I installed linux with parameter noapic

Got a pretty stupid question... My kernel is now 4.8 Stable#1 but when does the number change when i do makeworld and the other things? or where can i see that?

Hi, every body! I am a new comer for R, so my question would unavoidablely sounds stupid. Sorry! In my experiment, there are two type of soil ( soil F and soil D), each half of them were subjected to steam sterilize (result in FS and DS soil). A equal volume of soil from two of the four soil types (F, D, FS, DS) were mixed as follows: F+F, F+D, F+FS, F+DS, D+F, D+FS, D+DS, FS+DS (eight

I am getting this horribly ugly output from autotest when a test fails. Normal output from ''rake test'': -- 1) Failure: test_export_format(TaskTest) [./test/unit/task_test.rb:61]: <"Michael Alvarez"> expected but was <nil>. -- Same failure, as seen via autotest: -- 1) Failure: test_export_format(TaskTest) [./test/unit/task_test.rb:61]: ---

I'm trying to load a package locally from a zip file. When I load the package, I first get this, which looks okay: package ?IBGEPesq? successfully unpacked and MD5 sums checked HOWEVER, when I try to use the package to use the data with library(IBGEPesq) I get this message: package ?IBGEPesq? does not have a NAMESPACE and should be re-installed I've tried re-installing it, and

> What is a `"logically"-widened alwaysinline wrapper for the vector function`? Can you provide an example? Also, what is the `tricky processing` you are referring to that the vectorizer should care about? For the case mentioned earlier: float MyAdd(float* a, int b) { return *a + b; } __declspec(vector_variant(implements(MyAdd(float *a, int b)),

Hi Francesco, > I am crafting the attribute so that it makes it explicit that we are using OpenMP and we are expecting a Vector Function ABI. I just thought that another option would be to force FE to always emit "logically"-widened alwaysinline wrapper for the vector function that does the arguments processing according to ABI inside (we need that info in the FE anyway). That way

Maybe you need to subscribe to that folders? On 4/25/20 3:07 PM, Andrei Petru Mura wrote: > Rectification: For example, created a_folder would be found on server > under Maildir/cur/.b_dir. > would be: > For example, created a_folder would be found on server under > Maildir/cur/.a_folder. > > On Sat, Apr 25, 2020 at 2:45 PM Andrei Petru Mura <mapandrei at gmail.com >

Hi Aki, Thanks. I was especially interested in documentation related to dovecot and it's users permissions, the way in which dovecot uses users. Till now I found only spread information on different articles from dovecot's website. Thanks, Mura Andrei On Sat, Apr 11, 2020 at 9:49 AM Aki Tuomi <aki.tuomi at open-xchange.com> wrote: > Hi, > > >