similar to: Can somebody email me the Sipura SPA-2000 and SPA-3000 documentation?

Hi all, Anyone able to remotely reboot their password protected Sipura SPA-3000 from command line. I am trying: Sipura SPA-3000 from command line: # wget http://admin:mypassword@192.168.1.55/admin/reboot The strange thing is it works fine when I go to http://admin:mypassword@192.168.1.55/admin/reboot with my web browser... Thanks....

Hi, the topic says it all really. Does the Sipura 3000 detect and report UK clid correctly? thanks Mike

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Hi all, I was wondering whether anybody here would help me clarify this minor issue please. If I have the following setup; Asterisk ------ Sipura SPA 3000 (fxo) --------- Pstn Line Would a call coming in on the pstn line be answered by the ATA or just get passed through to the * server (depending on dialplan) to handle? So basically, the caller does

All- I'm attempting to set up a Sipura SPA-3000 in Sao Paolo, Brazil. Not being a portuguese speaker, I'm having a rough time of finding the relevant information on how to make the thing pick up the PSTN line and make an outbound call. The sipura in question works fine on a bench connected to a POTS line in the US, but is now plugged in in Sao Paolo. The immediate thing I notice is that

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able to pick IVR items with DTMF reliably. The

Anyone have one of these yet? http://www.voxilla.com/shop/index.php?action=item&id=38 -Dan

Hi there everyone! I've bought a Sipura SPA 3000, and succesfully connected it to my Mac, where I installed Asterisk 1.4.0. Both ports (FXO and FXS) are well configured). However, living in Brazil, I'd like to know if there are optimal settings to my PSTN that I should enter into the config of the device. I experience a little bit of echo on the FXO probably because I raised the gain of

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I

Hello. Has anyone run into problems accessing voicemail with the Sipura SPA-2002's? Our SPA-2000's work fine (registers fine, able to make and receive calls properly & also able to access voicemail). We've configured the 2002's exactly the same way. However, with the SPA-2002 we're unable to access the voicemail system (though it does register fine and is able to

Froogle found me one supplier for the SPA-841, not sure I trust them though. Does this phone even exist yet? Does anyone have any experience with it? Does anyone know a vendor other than Atacomm/voipsupply?

I hooked up a SPA-1001 with asterisk yesterday and all works well except the phone doesn't ring. The phone I'm using has a LCD display so I can see the call come in. (with caller id info) I can answer and complete the call but it's just not ringing. The phone rings if pluged into a POTS line so it's not the phone that's the problem. I've used the SPA-1001's web

Hi Friends, I have successfully implemented Intercom, Voicemail and International dialing using Asterisk. Now I want to connect my PSTN Lines to Asterisk server. I have 3 PSTN number (lines) to connect to Asterisk. For this, I want to use Sipura SPA-2100. Is my decession is correct or not? Is there any disadvantages with this Sipura SPA-2100? Please tell me. Thank you. Regards, Chandramouli

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

Hello, How good is :SPA 841 form SIPURA. Thanks Varun

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

I have just bought several Sipura SPA-841 SIP phones, and after some testing I have found out that the volume received by other parties when calling using the handset is very low. I've been able to reproduce this problem in the 3 phones I've tested so far. I've tried tweaking several configuration options but nothing I has helped so far. Has anybody else experienced this problem?

I am looking at some lower cost phone to use with Asterisk. What is the ArtDio IPF-2000 or the Sipura SPA-841 like? Also, I see voipsupply.com has an ArtDio IPF-1000 listed, is this a new or an old model? I cannot find any information on it. Adi