similar to: Phonecell + wildcard FXO (DTMF problems)

hi all. was having problems with my phonecell connected to wildcard fxo port. i get problems with detecting DTMF. i have tried relaxDTMF but to no avail. i have asked this before but would like possible causes. is it to do with echo? problems with the GSM network? haven't updated my asterisk for a long time. could this be a problem that has been sorted out. please would appreciate ur input

FYI. http://www.telular.com/products/index.asp These look like the right solution for any one wanting a cellular FXO device for * that interface with the digital cellular networks (GSM ,CDMA etc) similar to the www.cellsocket.com or the mystery FCT's http://www.ericsson.com/products/products_az.shtml#F or those old Motorola Bag phone adapters -------------- next part -------------- An HTML

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi Jim, The idea of reducing the switching activity between the instructions works by reducing the hamming distance between tow consecutive binary strings across the basic block, or reducing the number of the different bits between two consecutive instructions. This is why I need the exact complete encoding in plain 0’s and 1’s, to be as precise as possible during the scheduling process. I did

Yes your absolutely right, the Opcode and the Operands in each machine instruction are sufficient to generate the final binary representation of the MachineInstruction but not exactly. If you take a look at the format of each MIPS instruction, you’ll see that there are some fixed bits for each instruction which are not available inside the machine instruction object –From what I saw so far-.

On May 30, 2013, at 11:35 AM, Jafar J <pluck90 at hotmail.com> wrote: > Hi Jim, > > The idea of reducing the switching activity between the instructions works by reducing the hamming distance between tow consecutive binary strings across the basic block, or reducing the number of the different bits between two consecutive instructions. This is why I need the exact complete

I need to represent each instruction with its (32-bit) binary encoding, and I reached to a conclusion that I could get the encoding through the MipsCodeEmitter. What I’m trying to do exactly is write a scheduler which tries to minimize the switching activity between the scheduled instructions in each basic block. One way to do that is by representing each instruction with its complete binary

Hi Jafar, That’s not quite what I meant. Why do you need to know the exact encoding at all? The instruction opcode+operands should have all the semantic information you need without ever looking at the actual encoding. -Jim On May 30, 2013, at 11:08 AM, Jafar J <pluck90 at hotmail.com> wrote: > Yes your absolutely right, the Opcode and the Operands in each machine instruction are

Thanks, that helps. The code emitter is definitely not the way you want to go about solving this problem, though. Are the instruction opcode (MachineInstr::getOpcode()) and the operand values not sufficient? All the information present in the encoding should be inferable from those, as that’s where the encoding comes from. -Jim On May 30, 2013, at 10:12 AM, Jafar J <pluck90 at

Hello, Is it possible to activate the MIPS code emitter during Post-RA scheduler. I tried including both MipsCodeEmitter.cpp and JITCodeEmitter.h to PostRASchedulerList.cpp, but when I rebuild the compiler I get an error that says “/lib/Target/Mips/MCTargetDesc/MipsMCTargetDesc.h fatal error: MipsGenRegisterInfo.inc file not found”. I’m assuming that the MipsGenRegisterInfo.inc is not yet

What are you actually trying to do? The code emitters have nothing to do with the post-RA scheduler. -Jim On May 30, 2013, at 6:23 AM, Jafar J <pluck90 at hotmail.com> wrote: > Hello, > > Is it possible to activate the MIPS code emitter during Post-RA scheduler. I tried including both MipsCodeEmitter.cpp and JITCodeEmitter.h to PostRASchedulerList.cpp, but when I rebuild

Hello, why LLVM does not define physical register limits for MIPS by overriding the TargetRegisterInfo::getRegPressureLimit function the way it’s done for X86 in x86RegisterInfo.cpp and ARM. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20120818/a8e4f353/attachment.html>

Hi Friends, Do you know if there is a way to integrate this provider with Asterisk for outgoing calls ? Thanks in advance Paulo >>> lists@tlsolutions.net 22-11-2004 23:10:32 >>> Paul, your current method of load balancing is quite fine. Why do you want to round robin load balance? -----Original Message----- From: asterisk-users-bounces@lists.digium.com

Hi, I'm looking for a reliable, reasonably-priced, single-channel interface between * and US GSM. The VOIP GSM Gateways listed at http://www.voip-info.org/wiki-VOIP+GSM+Gateways (VoiceBlue, QUTEX) are multichannel systems, very expensive ($2500 or more). Next step down, there are various Fixed Cellular Terminal (FCT) or Fixed Wireless Terminal (FWT) devices. These typically have an FXS

Hello everybody Have a question, about interception with asterisk. Not Interception as legal way (google gives enough results about that topic) . I mean Interception of a call arriving. Here is my problem : In the company where Im supposed deploy VoIP, when a call arrives it comes on operator phone; but sometimes operator is away (coffee break and so), the other workers in the room have

Hi guys Has anyone have any workarounds with Internet Explorer 6 not displaying the mailbox on Outlook Web Access properly? My specs: Wine 0.9 on FC4, IE6 installed using ies4linux The problems (as I can see): the right-click context menu on the mailbox doesn't work (it doesn't display anything) and the compose email interface is missing the place where you can actually type your mail

Maybe someone here has found a good solution to this problem. I voulenteer with a local Search And Rescue unit and I was speaking with the senior members about how they interface the command trailer PBX with the PSTN or cellular networks when they are on scene at a remote location. Turns out they don't. Thus that got me to thinking about how one would get Asterisk to interface with a

Ok I have a question. Seen it come and go around the mailling list for a while but never really seen an answer that seems to sort it out. What is needed is some interface from * > Mobile Phone > Mobile Network Service. At this point all the providers in AUS that I have found are charging a Premium Rate for Land Line > Mobile Network services. What I would like to do is be able to

When I try to patch the Makefile for asterisk with the Apps_makefile.patch from Spandsp I get the following error. patching file Makefile Hunk #1 FAILED at 47. Hunk #2 FAILED at 76. 2 out of 2 hunks FAILED Has anybody seen this.