Displaying 20 results from an estimated 3000 matches similar to: "G729, x-pro, and codec ordering"
2004 Dec 21
3
Budgetone is not registering
Hi again. I cant get my Budgetone registered in Asterisk, and I cant
find what's wrong... uff. This is my config:
This fragment is from my sip.conf:
[12345]
type=user
user=12345
username=12345
secret=12345
authuser=12345
qualify=1000
nat=no
host=dynamic
dtmfmode=rfc2833
reinvite=no
canreinvite=no
disallow=all
allow=g729
allow=ulaw
allow=alaw
context=sip_default
And this is from my
2004 Apr 07
3
dropped calls from queue
We're having a strange problem with our receptionist. She runs an xpro
softphone and we're using a queue to handle incoming calls. It seems
nearly all of the calls that come in through the queue get dropped. At
first we thought it might have been human error (clicking the wrong
button in xpro or something) or that the person waiting in the queue
just gave up and hungup, however it
2005 Jan 18
1
No compatible codecs
Original Post
----------------
I have an Asterisk related problem with mutualphone.
I can connect to any number with any softphone that I am using (iaxcomm,
SJPhone, and a few others).
Also I have a Grandstream BT 101. But I cannot call (via Asterisk) to
mutualphone destinations. Other destinations go fine.
A working phone call (e.g. from iaxcomm) gives the following on the
console:
--
2004 Jul 27
2
g729 + GSM + g723
Folks!
We have purchased G729 and have been testing the codec on mUltiple Gateways. Here is what we have found.
Here is the config I have used:
-------------------------------
Asterisk Server On Dual Pentium Xeons with 6GB of RAM, running on Fedora Core 2
User1 is in USA on Broadband Cable
User2 is in India on 64Kbps ISDN Line
User1 using SIPURA SPA 2000
user2 using Xten professsional(X-pro)
2005 Jul 25
1
"Cannot native bridge" on licensed G729
Hi folks,
In an effort to save bandwidth (our 7905s run over a WAN) we've
switched from ulaw to g729a. We purchased 4 licenses from Digium (4
SIP clients, low call volume), and they seem to have been accepted:
[codec_g729a.so] => (Annex A/B (floating point) G.729/PCM16 Codec Translator)
== G.729 Host-ID: 07:53:aa:d3:e2:f2:bd:cc:27:60:9d:5f:da:eb:5d:e9:6e:09:a1:4e
== Found license
2004 Dec 21
0
Problems with Budgestream and g729 codec
Hello.
I'm having this problem with a Budgestream phone: I've correctly
installed G729 licensed codec in my asterisk box, but when I set my
budgestream to use only g729 codec, asterisk throws this message:
*CLI> Dec 21 18:02:49 WARNING[2375]: chan_sip.c:2764 process_sdp: No
compatible codecs!
Dec 21 18:02:50 NOTICE[2375]: chan_sip.c:7295 handle_request: Unable to
create/find
2005 Jan 28
0
Problems with H323/G729--No NATting and no Dynamic IP involved...
Hello... I'm having problems with H323/G729 setup. Below is the output
of h.323 debug when making a call. I use a SIP phone connected to an *
box in the same LAN. The * connects to a h323/g729 PSTN terminator
through internet. Calls rings and are answered in the other side, but I
get no sound at all nor the other side does (complete silence in both
sides). I thought this would just happen
2003 Dec 18
6
G729 question
I am thinking about using the G729 codecs on my endpoint devices and
purchasing some G729 licenses for Asterisk but I have several questions:
1. Which G729 codec is sold by Digium for Asterisk, G729, G729A, B...I?
2. If I have G729A on one end and G729B on the other, are they compatible?
I have looked all over the place for question 2, but without buying the
ITU docs
I cannot seem to find this
2010 Dec 27
1
G729a and G729 interoperability
Hello!
I am wondering how the differences between G729, G729a, and G729b
effect call bridging and server interoperability. For example, can
one server use the G729 code with another server that uses the G729A
codec?
Also, which version is Asterisk set up to use?
Thanks!
Elliot
2003 Oct 31
2
HELP HELP HELP G729
Hello,
I have that problem with codec G729.
Please can somebody help me!
WARNING[16384]: File codec_g729b.c, Line 413 (load_module): Unable to initialize va stuff: -1
== Detected 4 licensed G.729 transcoders
WARNING[16384]: File translate.c, Line 219 (calc_cost): Translator 'g729tolinb' does not produce sample frames.
== Registered translator 'g729tolinb' from format G729A to
2008 Feb 11
1
G729 without licence
Hello all,
I am running Asterisk 1.4.17. I have 2 Linksys SPA3102's and one
PAP2-NA (I have a second on order). They have G729a built into them.
This is supposed to be compatable with G729. I was trying to have them
use that codec when they talk to each other, but it seems they always
switch to alaw or ulaw (depending on my sip.conf file). Shouldn't they
be able to use G729a in
2005 Jul 11
1
G729 - What versions can Asterisk support?
Hello,
I'm trying to find out if Asterisk will support plain G729 or G729b.
I've read all over that it supports G729, but I can't seem to find any
explicit remarks regarding the specific versions of the codec Asterisk
will support. I noticed that Digium allows Asterisk users to register
and download G729a, but refers to it as G729 on it's pages. I also
noticed that on
2005 Jul 25
3
Wengo config and G729(a)
Hi list!
Again Wengo has made changes to their servers that require modifications
to * configs.
Is there anyone that has the 'new' wengo working with asterisk that could
post their configs?
Also they switched codecs, now G720a is required to connect. I can only
find an (open) G729 codec, is this the same as G729a?
Thanks!
2005 Jul 14
2
Phone manual..
Hi,
I tested asterisk server with Xpro program, and all the function working
well ( like 3 way calling, transfer.... ). But on the VOIP phone, I
don't know press which key for 3 way calling function and transfer
function... Can anybody teach me ?
thanks
2003 Dec 24
8
G729 troubles
Hello,
I've successfully installed Asterisk from last CVS and configured it
for using with DLINK-DG104S as mgcp CPE and PGW2200 as external sip
server.
All are work fine at G711 codecs, but then I disable all codecs except
g729 some calls failed (Not all calls. Some calls passed at g729
succesfully).
All my devices configred to use only g729 and I don't see other codecs
at mgcp or sip
2003 Sep 10
9
G729
I have come to realize that I don't have to have a g729a license in
order to make use of an ATA-186 or 7460 connecting to another 7460. I
just need to allow the codec in sip.conf.
Now what ramification does that have when I dial out over one of my
analog line (connected to * by a channelbank and a T100P) using my 7460
or ATA-186. The only benefit I am looking for is reduced bandwidth
2006 Mar 27
3
sipura spa2 + asterisk bug ?
Hello,
How to reproduce this bug (?) :
1. register sipura spa2 with 2 lines on asterisk.
2. use first line to call somewhere.
3. while using first line try to call from second line somewhere else
in 3 step i hear fast busy tones on second line and asterisk console
gives me this short error:
Mar 27 07:01:43 NOTICE[29656]: chan_sip.c:3629 process_sdp: No
compatible codecs!
My sipura adapter
2006 Jan 13
2
ILBC to G711 transcoding experince ?
Hello All,
Anyone here has experience of accepting a ilbc call and sending it on g711 or g729
I am having problem in VOICE , call goes though but there is no voice.
Senario:
Call is coming in from Machine A to Machine B, sending to Machine C
Machine B is an asterisk box, transcoding it from IBLC to G711 and g729.
Problem:
Voice is not appearing on the sip user sitting on machine A
Already
2004 Apr 21
0
g729 problem HELP!
Dear
i have buy two license of G729 codec and i have install/registered as
documented but after i start "Asterisk -vvvcng" i notice this warning and if
i made call the CLI say "No compatible codec!" How can i solve this problem?
Thanks in advance
Dimitri
------------------------------------------
[app_datetime.so] => (Date and Time)
== Registered application
2004 Jul 15
3
G.729 codec doesn't seem to work *even* after installing the license
Hi,
I am trying to post this again as I am getting no answers and the
support@digium.com bounces...
(I have searched the whole list and can't find the answer either)
I have installed a 5 user license for G.729 and want to route calls through
Asterisk from my G.729 phone to Cisco AS5300 also using G729.
Both Cisco and the phone connect using this codec if I do not force the call
to go