similar to: NMI issues...

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

Nov 12 08:54:27 steerpike kernel: Uhhuh. NMI received for unknown reason a0 on CPU 0. Nov 12 08:54:27 steerpike kernel: You have some hardware problem, likely on the PCI bus. Nov 12 08:54:27 steerpike kernel: Dazed and confused, but trying to continue Would my Digium TDM410P cause an NMI, or is my computer failing? - Mike

I have just noticed this message in my kernel logs, reporting the possibility of an error with my memory. This would go a long way towards explaining the problems i''ve been having. This particular error is occuring when i''m not running xen so is obviously not something brought on by xen itself. The strange thing is that the NMI error is always followed by the TLAN: eth0: Adaptor

Hi all, I've struggled for several days trying to get a Digium TDM04B 4-port wxfco card working on a Dell 1U PowerEdge 750 machine running Fedora Core 1. I finally got a call back from Digium who indicated that there is a fundamental conflict between the card and the PowerEdge having to do with PCI interrupts. Asterisk version is stable v1-0 12/29/04. The symptoms of the problem were as

Recently I started getting weird errors. All of a sudden I see the harddrive of my box glowing steadily and syslog is getting filled (and the cpu hogged) with these errors: It seems to start with this line: Jan 1 03:28:04 kernel: FXO PCI Master abort Jan 1 03:28:04 last message repeated 12 times Jan 1 03:28:06 kernel: CI Master abort Jan 1 03:28:06 kernel: FXO PCI Master abort and seems to

Hi All I'm having some serious kernel panic while using digium cards. It may be related to IRQ shared. Can this cause a lot of drop call and bad voice quality ? Do you guys know if there is a way I can assign one IRQ for each digium card ? Thanks a lot. Here is the output of /var/log/syslog kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20. kernel: [

> -----Original Message----- > From: Christopher [mailto:chris.robinson@voipsupply.com] > I see that there is a lot of discussion on the web about a > common error > after installing and modprobe'ing the zaptel driver. However I don't > see any resolution, anyone found a solution? > > Here's the output I get after modprobe: > > Uhhuh. NMI received.

Hi, I am having some problems mentioned below, the box is in production live environment with traffic around 30 - 100 calls. I am running T/E410P in a Dual P4 xeon with HT disabled. I am using zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just mysql, perl (small script) and asterisk. System runs very smoothly if the calls are around 40-50 and comes one by one , however sometimes

HI all, I have the following setup running: EP<--->Calling Asterisk<--->Relaying Asterisk<--->Softswitch<---> PSTN The Endpoint EP is registered with the Calling Asterisk. Calls are forwarded from this machine to Relaying Asterisk which in turn forwards it to the Softswitch. In addition, this machine also relays back responses from the Softswitch to the Calling

Hi all, So I'm trying to work on this complex fax server setup, and part of it involves connecting my asterisk server to my Rolm CBX switch, via a T1 line. I plan on using Asterisk simply as a T1-PRI Bridge to IAXmodem (which in turn, activates HylaFax+ to handle the faxing). So far, though, I don't think I'm getting 100% of the way there. When dialing the fax extension from my

I don't mean to be a troll in any way shape or form. I was on IRC last night and I observed the following convo. below. What do you guys make of it ? [02:14] <bkw__> Let me tell you how chidlish digium and Mark Spencer is. I walk into a restaurant with them all here at Astricon wearing my sangoma shirt and he asked me to leave. [02:15] <Dovid> u serious ? [02:15] *** mog

As part of patching a cluster which has two DL580G5 login nodes ( 4X Intel 7300 DC cpus) & 24 HP DL160G5 compute nodes ( 2x Intel 5272 DC cpus) we encountered an issue that I would like to record: I upgraded both DL580s to Centos 4.7 via yum but only rebooted one initially- this node, previously bomb-proof, started to hang randomly with no obvious messages logged to help with diagnosis.

I have seen this in the archives any number of times -- but I have yet to find a solution that works for me. Any suggestions you can offer would be most appreciated. Here are the answers to the questions I have seen asked in earlier posts. The log contains: Mar 10 12:26:29 WARNING[3015] chan_zap.c: Unable to specify channel 4: No such device Mar 10 12:26:29 ERROR[3015] chan_zap.c: Unable

Hi, I''m using xen 3.3.1 with kernel 2.6.18-8-xen x86_64 compiled with pcibackend support and VT-d activated on a HP dc7900 (Q45 chipset). I''m trying to use a pci acquisition card (NI-6221) in a windows XP HVM. Device is recognized under XP and look functionnal until I try to use it. If I try to acquire data or generate a signal (with National Instrument official tools) nothing

G'day, I am testing a new server with a Supermicro X7SBA motherboard and TE405 cards. When I load Dahdi and run dahdi_cfg I get the following errors: kernel: Uhhuh, NMI received for unknown reason b1 on CPU 0 You probably have a hardware problem with your RAM chips Dazed and confused, but trying to continue The reason codes I have seen are a0, a1, and

Hi there, I'm experiencing an echo problem and dammed If I can sort it out. We're running Asterisk on Fedora Core 3 64bit, installed as per http://www.voip-info.org/wiki-Asterisk+Fedora+Core+3. These are the specs of the Machine ? 1 x AMD A64/3500+ CPU: Desktop Athlon64? Retail w/fan SKT 1 x Asus A8N-SLI Deluxe Athlon? 64 S939 NVIDIA nForce(r)4 SLI? PCI Express Req: 24pin ATX 1 x

Hello, I am having some problems with faxing in asterisk. I have a TE100P which is taking my PRI. This seems to be working fine. I also have a TDM400P with 2 FXS. Again card seems to be working fine, I can dial from phones attached to these to ports and everything seems to work fine. I have 2 DID's for my two fax machines that dial the Zap port for the FXS on the TDM400P. The problem

I have a small system based on one TDM400 card with - 2 FXO modules for incoming lines - 1 FXS module for one phone The system was working fine in the past. The motherboard was exchanged and during the switch, the phones line was rewired with a mistake and a incoming phone line was connected to the FXS module, and there was ringing voltage on the module. Now, the system kinda works but the FXS

hi guys, i got a TDM400P FXS card an everything is fine except for this when i do modprobe wcfxs , the linux shows 2 TigerJet Network Inc Model 300 128k. i don't know why it is showing 2 of them. or is that what it is? ERROR: Freshmaker version: 63 Freshmaker passed register test ProSLIC on module 0 insane (1) 0 should be 2 Module 0: Not installed ProSLIC on module 1 insane (1) 0 cshould be

Hi, We have two of these 4 port FXO cards. However, we are having some problems with incoming/outgoing calls. The latest version of Asterisk/zaptel from CVS is being used. Voicemail, internal SIP <-> SIP calls between Pingtel xpressa hard phones work terrific, echotest is fine, and so on. The zaptel and wcfxs modules load fine, and show all 8 FXO interfaces in dmesg: