similar to: SIP and IAX Clients for pre OS-X Macs ?

Hi, this is the scenario: One * is placed in a central location with more than enough up/down bandwidth. One * is placed behind a DSL 3000/384. Both * are linked via IAX trunking. Everything is fine until the upload channel of the remote site is filled with a download, then heavy voice distortion starts. Well of course this is expected. So I fooled around with HFSC QoS scheduling on the remote

I'm trying to set up * server behind NAT. The box is set up as DMZ in my DSL router, i.e. all incoming connections without explicit port mapping are forwarded to *. So far I'm unable to get this setup to work for either IAX or SIP (tried IAXComm & XLite softphones on public IP address). Data seems to come in fine (IAX/SIP debug shows message interaction taking place), but there is no

I have read loads of the emails on the subject but have not read a setup I could use. I have a windows box using Winproxy to dial up the internet through a DSL modem. My internal network I am using while developing. My internet network has been renumbered so that I could test using Nikotel4Mac. It will only accept certain numbering schemes so I have changed my ip's on the internal network

We have been, unsuccessful, trying to implement inter-asterisk communications using IAX. I was wondering if anyone is having similar problems, or would share information about their succes/ Our environment consists of two servers with public IP addresses and DNS entries that resolve. (for the example we use "domain.net") Based on the information available to us, we have tried the

On Sat, 2005-06-18 at 13:17 -0700, Matthew Asham wrote: > For what it's worth I use a residential Shaw connection and have no > problems with IAX registration nor SIP to our Asterisk PBX elsewhere on > the 'net. When I had a dynapic IP connection with shaw, there was not problem either. I just changed to static and IAX can not connect. How can I test it? iax2 show registry Host

We have a running Asterisk on a small server (RH 9.0) und were able to make calls via SIP. Since the quality was rather poor (one of us has only a 150/75 kbps DSL connection, iLBC did not work(?)) we tried to setup clients (FireFly) and Asterisk for connections via IAX. In some point seems to be a mistake. Asterisk says: -- Executing Dial("IAX2[83022777@83022777]/2",

Dear all, I've been taking my baby-steps toward setting up an Asterisk phone system in my office, as also between my home and office (connected by DSL). I'm have a rough time getting two * boxes talk IAX over a LAN. I don't know what I am doing wrong, but am attaching my iax.conf and extensions.conf on both the boxes. Does anyone see it? ------config files start------ site-0

Hi all, I've had a strange problem this morning and I know someone who has reported exactly this problem to me too last week: - I've setup a new server running Asterisk 1.2.4. Currently there is no Zaptel hardware install (but there will be soon). This server is behind a NAT router on an DSL line. The remote IAX server on the Internet (which handles the call termination / origin)

I have a standard BT home DSL, which means I cannot have a static IP address, therefore i'm forced to use NAT, I subscribe to a DDNS service and have written a VB app which polls the router every 10 seconds and updates the DDNS if appropriate. This is fine but I need to be able to modify my sip.conf (externip = w.x.y.z) and reload sip, does anyone know of a script/app which does an nslookup

We have many IAXy devices in the field now. In all cases, in iax.conf, we have "qualify=yes", so that using "iax2 show peers", we can see whether or not the device is currently online. In some cases, the IAXy device and/or Asterisk are not communicating their qualification, because "iax2 show peers" shows the device as status UNKNOWN. However, when a user picks up

I just changed the from DSL to Shaw Cable (static IP) configure the firewall but now asterisk I can not register with FWD nor VoipJet calls going out. I am using IAX with FWD Did I missed to change a setting? I don't think there is any though. I am on shaw extreme connection; I just talked shaw tech. and they are not blocking any port - I was told. So why IAX will not register with FWD and

Hi, I just got my ip500 back after months of waiting. Is there an easy way to get it hooked up to asterisk without [t]ftp servers and all that or is there a quickstart page somewhere? tia r

Hi; I've just had a couple of discoveries in the learning process that are really making me impressed with this software. 1) IAX transfer - I'm running Asterisk boxes A, B, and C. B is in the middle and has a dialplan that points to extensions on C. When a client on A in the proper context on B tries dialling a client of C, B is smart enough to release itself somehow from playing

Hi, I am a newbie in asterisk. trying to configure firefly third party edition to connect to aserisk 1.0.3 im able to authenticate but cannot dial extensions. I have been reading the documentation cant seem to find the correct configs. Attached the error message and configs. What am I missing? *CLI> Urgent handler Feb 12 15:52:05 NOTICE[16537]: chan_iax2.c:5718 socket_read: Rejected connect

I donwloaded two IAX Clients (firefly and IAX phone) and they did register with *. It would make authenticated calls, but wouldn't actually register with the server. When I start the IAX Client the CLI show me the message: -- Registered '2004' (AUTHENTICATED) at 192.168.199.69:4569 After 5s: May 21 17:24:41 NOTICE[1133742896]: chan_iax2.c:5035 iax2_poke_noanswer: Peer

I know, that jitterbuffer should be set at receiving side and on outgoing call leg, ie. if sipphone calls to asterisk and outgoing to zap chanel, I should set jitterbuffer on zap channel (to dejjitter audio stream from sipphone) but what about pure voip situation (i.e. iax-iax, sip-iax, skinny-iax etc.)? I have following setup (homeworkers using sip phone connected to home asterisk via SIP and

iaxclient.sourceforge.net is the home of Steve Kann's crossplatform port of the iax library. iaxComm is a client written in c++ using wxWindows. There is a Win32 binary on the site. I think that it should be compilable on Linux and MacOSX, but can't test it. Feedback is welcome.

Hello list, I'm looking for a SIP/IAX client that would hook its audio on the JACK audio server on the client host. I first tried to use the Asterisk JACK application, installing an Asterisk instance on the client host, but I got mitigated results : the host runs a RT kernel (necessary for my use of JACK) but each time a new call is started, it triggers Xruns. Not good. Also, during the call,

I am looking to make a linux application that will use a SIP or IAX clinet to connect to my Asterisk server and make calls. I would like it to be written in C, but beggers can't be choosers. Any information that would help me with my development would be appreciated. If you know of a project that is already basically made, feel free to point me in the right direction and I will be off your

I checked the app store and haven't found anything promising, but I figured I'd ask here. Does anyone know of a SIP or IAX client for a non-jailbroken iPhone that will communicate directly with a machine running Asterisk? I know that there's at least one offering that seems like it's essentially a proxy (App runs on iPhone, iPhone talks to 3rd party server, 3rd party server talks