similar to: SPA-3000 - Stop Message Waiting Indication

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

This is a wierd one. Can't figure it out. I have an SPA-3000 at the house handling my incoming line. It's setup to direct the incoming call to asterisk. Works great 99% of the time. A few times a day, I'm getting calls that ring once internally and are then hungup. I managed to get a detailed log [1] of what's happening today and it looks to me that the SPA is acting wierd.

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

I've had an spa3k in service here at the house for a while now. After some initial wrangling, it's been working okay. I've had to reboot it a couple times and have noticed something rather annoying though. My setup is pretty simple and, dare I say, common. I have the SPA-3000 "inline" between my incoming POTS line and the internal house phone. It's setup to deliver

Arrggghh. Tearing my hair out here. I'm trying to set up the spa3000 in the UK for my home, and want * to control the dial plan I've googled to no avail. I've read the manual to no avail. Can someone, please let me know what the parameters is the spa and * are to a) receive a call from the pstn b) make a call to the pstn from the phone attached I can make sip to sip calls (i.e. I

hello my friend has the proxy set up his extention set up his password set up but he isn't getting a dial tone is there a second setting we need to put the address in? he is going to advenced settings line1 and in the proxy address box he is putting the info in below is the way he has it set up Sipura SPA Configuration Sipura Technology Inc Info System SIP Provisioning Regional Line 1 User 1

Hello, I have a Sipura SPA-3000 connected to my PSTN line and forwarding calls to my Asterisk box. It is a SIP peer "pstn-spa3k". I have setup "call-limit=1" in the peer config. When a call comes into Asterisk I get the correct "inuse" values but the hint isn't updated: sprite*CLI> sip show inuse * User name In use Limit * Peer name

Hello all, I have an ISDN termination box (TR1) that converts ISDN(Bri) to 2 normal analogue lines. The same number is assigned to these lines. These lines are connected to 2 spa3k registered to my asterisk box. When calls arrive, TR1 try to pass call to the first spa. If spa not takes the call immediately then try to pass to the other spa. The only configuration I found works is to put the

Does anyone have personal experience with a 5.8gig wireless phone (system) that has an MWI that WORKS with asterisk via fxs (in my case spa3k) generated MWI. I know the spa3k does stuttered dialtone but not sure if it generates FSK MWI. I see some that state they do but I also see reviews that say they don't. Doug

Basically, pretty much all the 2 line cordless systems I've seen come with a built in digital answering system that I'll never use, the main problem with this is that these units don't support VMWI (visual message waiting indicator) with telco supplied voicemail. This is a problem because I'll be setup an Asterisk system in the next month or so to handle my 2 analog and 1

I need to place a call using a "pin code". To access an external line, the host PBX (a Ericsson MD-110) will require that I dial *72*pincode#phone_number to complete any (trunk) call. When I send the number, my Sipura 3000 will reject the call with "Forbidden - wrong password on authentication for INVITE" (see below). All other calls sent to the Sipura box without the

Has anyone gotten call-waiting to function on the 4 line SPA-841? I've seen some documents that say it can do it, some say no way. If yes, can you share configs / SPA-841 settings? If no, did you work around it? I can call out just fine on all 4 lines, however, if I am on the line, another call coming in does not ring the 2nd line...it just goes to busy / VM. -Darren

Hello, Just want to tap the collective wisdom of this list as to experiences pertaining to the Handytone HT488 and the Sipura SPA-3000 adapters... Basically I'm looking for a FXO/FXS/LAN ATA and these two seems to be the top of the pick..Any comments and experiences esp. with Asterisk compatibility would be great, before I plonk in the bucks. TIA. /wai-sun

I'm trying to disable call waiting for Linksys SPA-941, but unfortunately as far as I have seen, there are no parameters on the web interface regarding this feature. I just want callers to hear the busy tone when the called party is at the phone. Probably I can accomplish this by using the "disable call waiting" in asterisk as well, but I have not been able to find any

Hello. Has anyone run into problems accessing voicemail with the Sipura SPA-2002's? Our SPA-2000's work fine (registers fine, able to make and receive calls properly & also able to access voicemail). We've configured the 2002's exactly the same way. However, with the SPA-2002 we're unable to access the voicemail system (though it does register fine and is able to

My apologies for the off-topic post ... No matter what settings I try, when I dial in to the SPA-3000 on the PSTN line, it picks up the call and immediately gives me a fast busy tone then hangs up. The info tab says under PSTN Line status: Last PSTN Disconnect Reason: PSTN Disconnect Tone which seems to indicate that the SPA thinks the caller has hung up. Since I am in Japan, it is possible

We have issues with all of the SPA-2000 ATAs we have where incoming calls from only one of our Asterisk servers do not complete. Details: 1- On the CLI we see that when the call is pushed to the ATA it shows Busy/Congested 2- We can make calls to this same server just fine 3- We can receive calls from other Asterisk servers running older CVS versions of Asterisk with the same exact ATA

I recently lost my setup (bad drive) and I'm now trying to get my setup back. I have Asterisk setup to a BT100, a Cisco 7960 (7.2 SIP) and an SPA-3000. I can call the phone extension, I can call from the phone on the SPA to other extensions and I can call out to the PSTN. What I can't do is to call from the PSTN to through the SPA to Asterisk. It rings twice then I get fast busy. I

Hello, I've been experimenting with Asterisk 1.0.6 and a Sipura SPA-3000, and I've run into a couple of questions I haven't yet found clear answers to: It appears that the SPA-3000 has no call progress on it's FXO interface? Asterisk considers a dial() as answered when the SPA-3000 has dialed the number on the PSTN line, not when someone has answered a phone on the

Hi All, I'm on of those brave souls who bought into the preproduction beta of the Sipura SPA-3000 FXS/FXO adapter. I've had the unit a few days and am exploring it's workings. I really want it mostly as a straightforward FXO adapter, to replace an X101p. Let me be clear, I'd love to support Digium in every way possibe, and will likely buy a TDM40 card shortly. But, the X101p has