similar to: Start of conversation lost

Hi list, Does chan_capi work with kernel 2.6? The Eicon Diva server card loads fine judging from /var/log/messages but Asterisk gives an error when trying to load the chan_capi module. I'm using chan_capi-0.3.5, zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a msg that may be related and don't know

Hi all, I?m using * with a Suse 8.1 (kernel 2.4.19-4GB). My hardware are a Eicon Diva 2.01 PCI and a Eicon Diva Server 4BRI; I have installed the drivers wich came with the distribution using the distro installer (yast2). I?m experiencing problems with outgoing calls so I?ll try with chan_capi instead of chan_modem. The point is that I?m having problems with the compilation:

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9

Hi everybody. I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7 My linux is a debian. It was working during a few days an suddenly (after a lot of reboot) I've got this error message that seems to be very popular but I couldn't find any answer on the net : ==============================================. Asterisk Dynamic Loader Starting: == Parsing

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

Hello everyone! I've got a Eicon Diva Server BRI card into my "*" box working just fine, but I wander if there's anything I can do to improve voice quality for my operators. I'm thinking something along the lines of "auto gain" and sudden noise suppression (like when you hit a fax machine or the other party accidently touches the dial pad on the phone). Does

Hi, I am trying to configure a Diva Server 4BRI to work with chan_capi. Here are the steps that I took: - compiled fresh kernel with new-style CAPI support: i4l_divas_1.2 - got the divactrl_1.2 utilities, configured the card startup scripts, - rebooted, card firmware loaded properly, "capiinfo" displays detailed info on 4 controllers, however there is an error message: FAC REQ -

Hello all, I'm having problems getting chan_capi 0.3.5 to work well with an Eicon Diva Server card using using the driver from linux kernel both 2.6.10 and 2.6.12 (vanilla versions). I have a (really two) producci?n system(s) running chan_capi in another identical Eicon Card using kernel 2.4.27 and the Diva Server drivers from Eicon. I installed an compiled the source level rpm

I've got a brand new Eicon Diva Server BRI card and I want to configure it with Asterisk. I managed to get asterisk and zaptel to compile and install, I've compiled and installed the drivers for the Diva card and now I need to compile and install the chan_driver for chan_capi. Unfortunately this fails miserably. I get the following messages: I'm using: Kernel 2.6.16.37.4,

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log

Hi all, I have a Diva Server V-BRI-2 card, which support, as written in reference guide: Extended tone processing (human talker detection, generation and detection of country-specific tones) I would like to detect human speech and fax tone with asterisk. I think that the diva card transmit a DTMF code when detecting voice, but chan_capi doesn't receive this DTMF code. I verbose it

asterisk-users-request@lists.digium.com is believed to have said: >chan_capi does not set the NT-mode. Your cards driver need to do that. >E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl >or set NT-mode in the config wizard. >chan_capi does not (need) to know anything about what protocol the card is >doing. CAPI is independent here. Ok.

Dear All, I have a production system with and Eicon Diva Server XBRI, and all works fine, but Today I have seen two crash with the next messages in console: -- Executing Dial("CAPI[contr2/971846147]/10", "SIP/790||r") in new stack == Everyone is busy at this time -- Executing Hangup("CAPI[contr2/971846147]/10", "") in new stack == Spawn extension

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

Hello, I'm trying to get my Eicon Diva 2.01 PCI ISDN card working with Asterisk and was told that I still have some chance if I tried using chan_capi. I tried compiling it (chan_capi) on two systems running 2.6 kernels, but got lots of errors. Before I go investigating - is it possible to compile chan_capi on 2.6 kernels? Or does it work with 2.4 ones only? Tomek

I have installed Asterisk 1.2.18 am am trying to install chan_capi. The current RPM ftp://ftp.melware.net/Trixbox/chan_capi-1.0.1_1.2.14-1.i386.rpm installs but Asterisk dies on startup. The following appears in the log: May 27 03:28:18 asterisk1 kernel: divas: Diva Server V-4BRI-8 IRQ:7 SerNo:25290 May 27 03:28:18 asterisk1 kernel: divas: started with major 252 May 27 03:54:17 asterisk1 init:

I am trying to use chan_capi with an Eicon Diva Server BRI. I installed the Eicon drivers from source including CAPU and I can use the board correcly using tty_test and minicom over /dev/ttyds01 or /dev/ttyds01. I need to insmod capi ( why? it is not written anywhere) and then capiinfo shows me all board parameters, but I have to break it otherwise capiinfo doesn't exit at all, but I don't

>>0.4.0? who is working on chan_capi? long time with no updates from. >>I'm rewriting the chan_capi logic. >> >> > >kapejod already did 0.4.0-PRE1, which I use as base for cleanup, fixing and >new features. > >What exactly are you rewriting? If someone else is working on chan_capi, we >should synchronize our work and ideas. > > yes

When I saw the update for Cisco Phone RTP issue I thought I would try it. Unfortunately chan_capi wont compile on this update. Can anyone recommend a good * release for Capi, Bri ISDN and Cisco 7940's SIP 6.3. Or will CHAN_CAPI also be updated ? Running Eicon Diva Bri Cards. Error: chan_capi.c:1187: too many arguments to function 'ast_dsp_process'

hi, i have a problem with distorted voicemail sound on our asterisk test machine. i'm using cvs-head (2004-01-17) and chan_capi 0.3.5 (with my patches to make chan_capi compile with asterisk cvs-head) and a diva quad-bri isdn card. other things work well with my setup (dial in, dial out, app_meetme) and sound recordings from sip channels. the problem is with voicemail and app_record,