similar to: Sipura 841 delayed: other PoE options?

Froogle found me one supplier for the SPA-841, not sure I trust them though. Does this phone even exist yet? Does anyone have any experience with it? Does anyone know a vendor other than Atacomm/voipsupply?

Hi, I'm not clear on how to use Power--over-Ethernet, specifically with Polycom phones. What I understand, is that by buying the Polycom 501 with the 802.3af cable bundle, I simply connect my phone, through the Polycom provided "special" RJ-45 cable, into a PoE capable switch, and voil?! Is this true? And if so, what happens when the Phone doesn't connect directly to the

When I bought two Polycom 501 SIP phones, I naively thought they were Power-over-Ethernet (IEEE 802.3af) because they were "powered over ethernet." Silly me. Polycom must have some odd voltage or funny way of injecting the power, because the POE switch I bought for them (Netgear F@510P) won't power them, though if I use the Polycom-supplied AC adapter and ethernet power

As an alternative to the "expensive" PoE switches out there, I found the D-Link Web Smart DES-1316 switch for just around $400. Now, the issue is, it does 802.3af power and, as I've found out through previous discussions, this original 76?0 series phones (the non G variety) do not use 802.3af. So I'm assuming I just need to use the special cable thing as per

Hi all, I'm researching IP phones for a new office setup. We will need 30 phones. I have read the wiki and the polycom site for the phones, but I still had some questions about real world experience with these phones. -According to the documentation, the 500 series ( and 600, according to a polycom rep ) have built in hubs. Has anybody noticed performance issues in this setup, when

>Message: 9 >Date: Thu, 02 Dec 2004 11:33:16 -0700 >From: "Kevin P. Fleming" <kpfleming@starnetworks.us> >Subject: Re: [Asterisk-Users] Polycom 500, asterisk user opinions? >To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com> >Message-ID: <41AF5FEC.7050406@starnetworks.us> >Content-Type: text/plain;

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

Hey guys, I was wondering what POE solutions are being used ? Ive done some searching on google and found that PowerDsine seems to be good brand. Any comments,suggestions, and experiences on POE hubs other POE products would be greatly appreciated. Thank you, Steve Maroney

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy

I'm trying to spec out hardware for a new office, and I'd like to include power over Ethernet as an option. I've seen a handful of PoE injectors around $1000 for 24 ports and a couple switches up around $2500 for 24 ports. Are there any cheaper options, short of buying a boatload of 1-port injectors off of ebay? I don't really need more then 24 ports of PoE out of 48 total

Hi Just 2 issues I have with SPA841. 1. I autodial extension 600 then inside an AGI wait for more digits. The digits are transmitted correctly to * but they do not show up on the SPA841 display, only the 600. How do I set the 841 is show the digits after the 600# 2. Is the SPA841 pixel display backlit? Master

Hi, Do you need a special cable and power for that unit or you can run it of PoE Switch? Thanks. robert

I need to connect up to sixteen phones per building, I can use a cheap hub, but POE would be useful. Is there a cheap POE hub available? Everything I have seen has been expensive. Chris Mason

>From atacomm.... ________________________________ From: Jessee J Holmes [mailto:jholmes@atacomm.com] Sent: Thursday, May 12, 2005 2:24 PM To: Wiley Siler Subject: Re: Got a date yet? No specific release date as of yet; but, we're hoping to have a physical date soon. So far planned release is either in June or July. Right now they developers are cleaning up the echo cancellation

hi any chance of making asterisk support these? http://voipstore.atacomm.com/shops/ViewItem.aspx/27934028032 -38356249088.htm roy

Hi, folks: I just took delivery of new PoE cables (PN 2200-11077-002) for our Polycom phones here in the office. I have the following to report, for the erudition of existing Polycom users and those considering purchasing Polycom sets from the set of models noted in the subject: 1. The cables do indeed work (hooray). 2. The cable has a module on it about a third of the way from a female end.

Hi all, For a top quality setup, I will need to install high quality VoIP switches with QoS and PoE. My potential customer should not have any problem with call quality. Experienced folks, Please advice me what switches to install and at what price. I may need it for upto 100 phones. What else should I consider so that phones work without problem along with the computers on the same network?

Hi listers, I am looking for people who have used Power over Ethernet switches, primarily in conjunction with Polycom IP 501's. I've been looking at the Linksys SRW224P, since I've had good luck with the SRW224 in our office. However, Nortel, Cisco, Adtran, etc. all have an offering, all of which vary in price. I would appreciate any input people have to offer. Thanks, James

We are currently considering the Linksys POE switch for a small Asterisk office deployment. There will be no separate wiring closet to put it in. Can anybody tell me if this switch has a loud fan? Users would not be able to tolerate a loud noise close by. Otherwise we will go with a fanless desktop switch. Thanks, -- Andres

I have an upcoming install which places the switch close to some employees in a quiet work environment. Can anyone recommend a quiet 24 port POE switch? The Linksys SRW224P behind me right now would be objectionable, I'm sure. -------------- next part -------------- An HTML attachment was scrubbed... URL: