similar to: Soekris net4801 for home use?

Hi all, I have a Soekris net4801-50 board with OpenBSD 3.9 where I've configured a dhcp server and tested it with a regular PC connected directly via a crossover cable with success. The problem comes when I try to connect my IAXy device instead of the PC. I can see with 'tcpdump -nettti sis1' that the IAXy isn't sending any packets to the dhcp server. I thought my IAXy was bad

Has anyone on the list used a Soekris engineering PC as a TDM - Ethernet bridge? For example something like a net4801 with a TE110p in it and then using TDMoE to get it into a bigger server where the call processing proper will occur. Anyone know if it might handle a quadspan card ok? (no transcoding, just pure PRI to TDMoE bridging). Craig

Is anyone using a net4801 and an analog only setup? I am looking for a modem that is PCI 3.3V, apparently the X100P is 5.0V PCI only so it won't work with the net4801.

Hi. I am trying to use EXTLINUX 3.08 to boot a Soekris net4801 from a CompaqFlash card. BIOS reports the CF card as the first master harddisk. During boot/load the loader hangs after this output: EXTLINUX 3.08 2005-05-19 PXELINUX and LILO works fine on the same setup It this a general problem with Soekris/net4801 and EXTLINUX? Regards Johan Linn?r

Hello, Recently I have discovered a problem with serial console output when net-booting a Soekris net5501 board via pxe. When using pxelinux.0 from syslinux 4.04 package I get only 15 characters from the output, then the carriage returns back to the same line over and over again, making it impossible to read the output. What is more the booting process (trying configuration files with

Hi, I'm having an issue with a soekris net4801 board and a S101i "IAXy" device. When I connect a successfully provisioned IAXy directly via a crossover cable into an ethernet port of the soekris, the link led turns on orange so i'ts 10Mb and the activity led blinks like if there is some action going on but when I try 'tcpdump -nettti sis1' I see nothing going on, no

Hello everyone, Even though a lot of it was a bit last minute, several of us from the commnunity made it to Baltimore to help Digium with their booth at ISPCon. It was a great time. Gregory Boehnlein, Brian Capouch, Christian Savinovich, Kristian Kielhofner (me), and John Todd (not pictured) were there (as well as others), and some pictures were taken (the up close ones of me were very

Hi, I want to build a PBX base on Asterisk using an embedded device. Can anyone please recommend an embedded device I can use for doing so? I will install linux or freebsd in the device. Thanks A

I have released SYSLINUX 3.08-pre5. Sparse files should now work correctly in extlinux. Symlink support still needs to be added, though. -hpa

asterisk-dev-bounces@lists.digium.com wrote: > I have a DSP based system that is working on a four port FXS system > using a 200MHz arm processor. Well.. since we are talking about this topic I owe you guys notes of my experience with SC1100 CPU used by various boards (www.soekris.com , www.pcengines.ch etc.). We made a Linux distro and compacted it into 32MB flash. Installed asterisk and

Just curious... Does anyone know if any companies using Asterisk on embedded hardware (out at the customer premisis), such as the Soekris Net4801, to provide VOIP service? Doug.

Hello, I am using syslinux to boot a Soekris net4801 into LRP/Lince 1.2 linux. Net4801 has no video card - it has only a serial port. During bootstrap syslinux writes the text file syslinux.dpy to the serial port but it breaks the line every 15th character. I tried syslinux versions 1.66 and 2.11 with same results. In the Archives from June 3, 2002 , there is a message on this subject

I try to use a linux on a soekris : http://www.soekris.com/net4801.htm . This is a tiny PC without screen nor keyboard. So i can use only a RS232 console. I can find some information on the use of lilo on this card with success (a modified debian). I have choose to use a mandrake then the mklivecd script to transforme it in .iso file (wich make it read only). I have create my own script to

Hello everyone, Does anyone out there have actual experience with running * on a mini-itx board from VIA? They look good, but I have some reserves because of VIA's problems with PCI latency in recent years (audio dropouts, wierd things happening). I am looking at the EPIA CL-10000. For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb RAM, and a nice small (12 x 2 x 11)

Hi, I'm looking to backup a small network (Hughes DW7000 satellite modem, small consumer grade Internet Broadband router+wireless, Soekris NET4801 single board computer + 4 port lan card, Cisco 2900 switch) and want a small form factor (This is sitting on a small shelf) and light. The main thing I'm running into is that it *HAS* to be serial. (The Soekris only has 1 USB port and I

I recently installed the April 21st snapshot on my Soekris net4801 (dmesg here[1]) that has a vpn1411 crypto-accelerator in it. For the first time, I'm getting a tremendous amount of "Corrupted MAC on input" errors while sshing into this machine. While there has been discussion -- going all the way back to 3.5 -- that it's a hardware problem with the net4801 and the

Hi Kristian, Anywhere I can read about this Soekris/AstLinux project? ... Regards, Hans -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Kristian Kielhofner Sent: Thursday, February 24, 2005 6:02 AM To: jim@vanmeggelen.ca; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users]

Hi All, I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO card only to find that the Soekris will not boot with the card installed. The LEDs flash for a second and then nothing, it does not boot. I've tried 2 different X100p cards, both of which work in a regular desktop system, and still have no luck. I tried a different Soekris 4801 with no luck. I've also tried a

hi Peter, everyone, I recently installed extlinux on my CF drive. after a few botches, it works, with menu.c32 too. Heres a few notes/observations: - menuing seems pretty sensitive to presence of tabs in extlinux.conf, unlike with pxelinux.cfg/default, Is this an oversight, or something Im misremembering ? - extlinux doesnt have the timeout after menu-choice. if I dont choose, it times out and

Hi group, i'm brand new and i would like to ask about soekris hardware. I read along the web but i have some doubts that i think can be solved here. My question are the following: 1) does the Digium TDM400P fit in the soekris box with a 4801 SBC or a bigger box is needed? Any suggestions about where to pick up another box? 2) does the Digium TDM100P (already discontinued) fits fine in a