similar to: Virtual Modems

Hi all, I'm currently searching for a PCI modem that will be used to receive faxes. I've tried out a few modems but they all use conexant chipsets, which need out-of-tree kernel drivers and currently doesn't work here (kernel oops when the installation script modprobes the driver). Does anyone know of a PCI modem that works out of the box with in-tree kernel drivers? Thanks,

Hi! Is possible to use X100p TDM400P, Tdm410p, Tdm400, A400p, Ax400p or any others digium card FXO for use Fax modem? Thanks.

I have a modem in my system that comes up with this in lspci: 01:07.0 Communication controller: Agere Systems 56k WinModem (rev 01) What programs under CentOS, if any, can use this modem and how? Thanks. mhr -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070807/fbeb461b/attachment-0001.html>

Hi all, forgive the question but is it possible to use PCI modem cards (aka winmodem's) as FXO/FXS ports in * ? what about external modems like the USR Sportsters? Thanks in advance, Bryan. Bryan Nolen Lead Developer http://Arc.Net.AU http://cdonline.com.au

Hi Perhaps people with more logic/electrical knowledge then I could address this....

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server. This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total 4034145216, 4031118560 linkset siuc, link

I am having trouble with a simple gallery search. I type in a segment of the address and i only seem to be getting results if I use the correct case. This is in my Gallery controller: def search @gallery = Gallery.find(:all, :include => :property, :conditions => "address LIKE ''%#{@params[:keywords]}%''") end On a different note: I am having

It's been many years, but it seems that I have to receive a fax and might have to send one too. Is there a way to do this on CentOS 5.5? (Hope so.) tia. -- Anything is easy if you know how to do it.

i need to prog winemodem my email kingsawa1 at cec.sy -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.winehq.org/pipermail/wine-users/attachments/20080502/29b4fca5/attachment.htm>

Hello everybody, I've searched google for a while looking for a list of USB or PCI dialup modems supported by CentOS without success. Any information on this subject will be really appreciated. Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20081125/dd8598ed/attachment-0003.html>

So I've been on the Asterisk list for a long time. Mostly looking to set it up as a cheap alternative to a commercial MeetMe bridge, as a for-fun project. I keep noticing the Wildcard FXO X100P sorta seems like a Winmodem. Winmodems are basically a sound card chip tied to a pots port, where the Winders driver takes on the MO/DEM functions in software. I've always despised them as a data

Has anyone had any experience using a modem through the Asterisk system? I have some technical support personnel that need to use a computer modem to connect to a remote system for troubleshooting. Is there a SIP compliant gateway that will support a modem connection at decent speeds (minimum of 28.8) that anyone knows of? If not, has anyone used a Digium FXS card for this? Thanks

Hello, I'm looking for a dirt cheap solution for SOHO use to handle at most a couple of POTS lines, and I notice that X10?P cards go for $15 on eBay as opposed to $90 for an OpenVox card or over $200 for a Sangoma. I have a couple of questions about those cheap FXO cards: 1. Are they all glorified softmodems, ie. none has an on-board CPU or DSP and outsources all processing to the

Hi all, I've tried researching this, and so far, have struggled to find any contemporary information on the issue, so I do apologise if asking this irritates people who have answered this before. I have managed to set up Asterisk 1.8 on the web server here. I have two softphones (Ekiga) able to communicate with it. So far so good. I'm now curious to see if I can link it with the PSTN

Depending on what you are broadcasting, for 28.8 I would go 16kbps and be really safe... Lithium ----- Original Message ----- From: "John Griffiths" <john@capmon.com> To: <icecast@xiph.org> Cc: <icecast@xiph.org> Sent: Thursday, April 05, 2001 3:12 PM Subject: [icecast] bitrate for slow modems > ok so 24kbps for 56k modems... > > can i go any lower and get

Kelly Lee Myers: > Depending on what you are broadcasting, for 28.8 I would go 16kbps and be > really safe... well, you could consider not broadcasting at all, that would be 0kbps, and would fit my 9,6kbps gsm connection ;) scnr uno > ----- Original Message ----- > From: "John Griffiths" <john@capmon.com> > To: <icecast@xiph.org> > Cc:

Hello. I am a newbie to wine. In my local area, the only way to have unmetered access to th internet is to use AOL. After some research on the internet, it gas come to light that some linux users have managed to install AOL's version 5.0 of their software to access AOL. Following these instructions, AOL5 is installed on my computer. The command "wine setup32.exe" was run. AOL5

This is a system for our lab. I have no problem getting rid of X100P clones. But I am just curious why can they work. Even the drivers are not loading correctly. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kerry Garrison Sent: Tuesday, May 02, 2006 10:51 AM To: 'Asterisk Users Mailing List -

Do normal modems work with asterisk?

I am starting to work on a similar solution, but with full call manager rather than CME. I am going to use Asterisk to accept POTS calls through PCI FXO ports (winmodems) and then forward the calls through to call manager via SIP. I don't have my FXO cards yet (waiting for UPS man!!) but I have * talking to the CM through SIP just fine. I am testing with the Cisco softphone, connected as a