similar to: Gossiptel with Asterisk?

Hi, I have Asterisk setup and registered with Gossiptel but i'm only getting 1 way audio. If I call 160 (echo test) or 123 (talking clock), it makes the call but I just get silence. If I call my Gossiptel number from a pstn line, I get gossiptel -> pstn audio but not pstn -> gossiptel audio. I've got ports 5060 and the rtp ports forwarded in on the firewall and I have 3 other sip

Sorry not to have observed etiquet and lurked here for a bit before wading in with a question but I have an issue that may well be because I dont know enough about what asterisk is actually doing under the hood to understand why I cant do what I want with asterisk. Im hoping that someone can point me in the right direction :-) This is what I have: Mandrake 2006 running Asterisk 1.2.3 - no

I have no analog line interfaces on my asterisk system, but I do have two UK 0870 numbers routed to two separate VoIP accounts (one with FWD, one with gossiptel). Asterisk is configured to register with these accounts. I get voice calls through just fine this way. I thought I could get one of these 0870 numbers to route through to rxfax, thus allowing folks to fax me directly. I've set up

Now this is really frustrating. Everything was working fine, and now it isn't ... I don't think I've changed anything that would affect this, but I guess you never can be too sure. My setup is as follows: SIP softphone (SJphone) connected to Asterisk running my Linux NAT firewall box. This is all on the internal network. Asterisk then dialing out through various means - SIP to

Hi, I ve had some problems printing from NT, I had samba 2.0.3 and every time at the end of document there is a blank paper and I don't know how I can stop this ??? Regards, and thanks in advance for any help Amin.

Hello, ** Please CC replies to ian@ichilton.co.uk as I am not subscribed ** I have a Brother laser printer connected to a linux box running Samba. It is working fine from Win98 workstations, but now I have Win2K on my laptop, I am unable to print. This is because the linux box obviously doesn't have the win2k driver so I tried to install it as a local printer and then change it to a network

Hello, ** Please reply direct to ian@ichilton.co.uk as I am only subscribed to the list in digest mode ** I am trying to compile Samba 2.0.7 on my SGI Indy running IRIX 6.5 I did a: ./configure --with-smbmount (I want smbmount) then, after an hour compiling, it gave this: Compiling client/smbmount.c client/smbmount.c:27: asm/types.h: No such file or directory client/smbmount.c:28:

Hi All, I've got an MD3200 modem which is working as a Zaptel FXO interface for Asterisk (X100P clone I believe). It seems to work, but on incoming or outgoing calls I can hear the other party ok but when I speak, I hear my voice echo back at me (quite quietly but it's distracting!) on everything I say. The other party doesn't seem to hear the echo - they just say I sound a bit quiet.

I have a little home network with one Windows 98 PC and a pc running linux. My idea is that as soon as DSL is finally made available to my area (which I keep getting told will be real soon now) I want to route it through the linux box and up to the Windows PC, using IP masquerading, etc. At present I have samba enabled on the unix box which opens up several worthwhile conveniences to me:

Hi, If I do a "sip show channels" - I seem to be getting channels left open after calls have ended - any ideas why? I thought at first it was my Sipura SPA-3000 and that Asterisk was not detecting that i've hung up. However, after more testing, it seems to be just on Gossiptel calls - I tried a few of my other sip providers and the channels stay open after the call has ended but

On Sep 15, 2004, at 8:40 AM, Henrik Bach wrote: > Hi, > > Has some one committed these patches into CVS? Not yet... checked 10 minutes ago... I'm attaching the cvs diff -u version of them (I've read Reid Spencer post about it) > Paolo, thanks for the patches. In the near future I'll try to compile > them. > > I've installed STLport 6.4.2 with vc6. May I

Hi, Has some one committed these patches into CVS? Paolo, thanks for the patches. In the near future I'll try to compile them. I've installed STLport 6.4.2 with vc6. Henrik --- Got Freedom? Software Freedom Day 2004 - 28th of August http://www.softwarefreedomday.org/ --- >From: Paolo Invernizzi <arathorn at fastwebnet.it> >Reply-To: LLVM Developers Mailing List

Hi, I am installing xen first time. Install in suse linex 9.3 & red hat se 4.3 but i could not start xen domain. I have installation guide tar files & rpms of xen 3.0. but still i am not able co to configure xen 3.0. can some body help me how to configure xen. Awaiting for reply. __________________________________________________________ Yahoo! India Answers: Share what you

Hi, I have an FXO card connected to my phone line which works in Asterisk as Zap/1. Is there any way of detecting whether something else is on the line before picking up on this channel? For example, I dont want to pick up and dial out on the line if someone is on it using another phone (which is connected directly to the line, rather than through Asterisk). Also, when an incoming call comes

I''ve written a story and I run into a snag. I''ve written the create_forum method and told it to set the id to 1 but when it creates the forum the id is autoincremented. My forums table is empty but the id keeps incrementing the newest record on creation. When I run the story it comes out as something like 59 which fails my story because I''m asking it to look at /forums/1

Dear R developers, I have a new class, which I called "Molecule", and have tried to define = a "+" operation for 2 objects of this class. This is what I have written so far, although the method is not complete = (I'm trying to look at it at intermediate stages): setMethod( f=3D"+", signature(x=3D"Molecule",y=3D"Molecule"),

Dear all, I have a very small script to plot a function. Here it is: ########################################## sinca <- function(N,th) { return(sin((N+0.5)*th)/sin(0.5*th)) } plot_sinca <- function(N) { x <- seq(-5*pi,5*pi,by=pi/100) y <- rep(0,length=length(x)) for (i in 1:length(x))y[i] <- sinca(N,x[i]) plot(x,y,type="l",ylim=c(0,2*N+4)) return(c(x,y)) }

Dear R community, I would be greatful if somebody could shed light on the following. I have created a set of 6 points to check how centroid agglomeration works in cluster analysis: > Y <- data.frame(x=c(-1,1,1,-1,10,12),y=c(1,1,-1,-1,0,0)) It is quite intuitive to understand that the last clusters to be joined will be {1,2,3,4} with {5,6}. Now, the centroid for the first cluster has

Dear R gurus and users, I seem to have problem finding the right tool for plotting convex hulls over 2D plots, after a cluster analysis. In fact I would like to draw a convex hull in 2D for a generic group of points. I found a "convhulln", but this doesn't seem to give me a convex hull. Here is what I do: > library(mvtnorm) > Mean <- c(2,1) > Sigma <-

Hi, Is it possible to have an incoming SIP address like someuser@sip.mydomain.com, where sip.mydomain.com points to a box running Asterisk? If so, please could someone give an example asterisk config snippet for this? If it is possible, I assume ports 5060 and 10000-20000 need to be opened in the firewall too. Thanks! --ian