similar to: Tyan K8SE (S2892) / nForce Pro Experiences

From: "Bryan J. Smith <b.j.smith at ieee.org>" <thebs413 at earthlink.net> > I wrote a pre-sale evaluation back in January 2005 here: > http://lists.leap-cf.org/pipermail/leaplist/2005-January/000532.html > ... Tyan S2895 -- nForce Pro 2200+2050 Just know that the pre-sale evaluation was of the nForce4, and didn't take the nForce Pro 2200 and 2200+2050

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His

I've been planning to build a dual Opteron server for awhile. I'd like to get people's suggestions on a suitable motherboard. I've looked at the Tyan K8SE (S2892) and K8SRE (S2891) but would like to find more Linux-specific experiences with these boards. Some features I expect are at least 4 SATA (SATA-300?) ports, serial console support in the BIOS, USB 2.0 and IEEE-1394

I had my eye on the Tyan dual-Opteron mobos for awhile. I tried to find a posting *anywhere* sharing experiences with these boards under Linux. No such luck. So placing myself under the heading "Where Angles Fear to Tread," I went ahead and built a system anyway. Here's what I've learned. The specs: Tyan Thunder K8SE S2892, BIOS 1.01 2x Opteron 270, 2Ghz Dual-Core, retail

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

Folks- I have had a machine dropped in my lap that I am trying to get CentOS 4.1 to run on as a first pass (the hope is for it to eventually run Rocks -- http://www.rocksclusters.org , which uses CentOS 4.x as its underlying OS). The machine has 2 Opteron 250DP (2.4GHz) with 4 GB of RAM. It is using a Tyan Thunder K8WE (S2895A2NRF) motherboard with an nVidia nForce chipset --

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

While I wait for the Xen 3.0 Test CD to download, has anyone has luck using an Asus M2N32-SLI Deluxe motherboard (NVIDIA nForce 590 SLI MCP chipset)? The CPU is an AMD Athlon64 X2 3800+ AM2 w/ 2GB DDR2 533. The motherboard mostly works under Gentoo using kernel 2.6.18 with the "noapic" kernel boot option in my grub.conf file. The only major issue with the Gentoo kernel

In addition to bug 70972 (Modesetting failure at 1280x800), there may be another bug affecting the NVIDIA GeForce 7150M/nForce 630M. I think that this is a separate issue from the above. When using KDE or Ubuntu Unity with nouveau on this GPU, there were artifacts and missing UI elements. I think that this is probably more likely to be a rendering issue rather than a display issue. I am not sure

Hi The setup, as in the subject, is supposed to boot a Winpe to install xp to a clean PC. I use the Ramdisk method (ie PXELinux pases the setup on to the M$ pxe loader and and boots WinPE) It works perfectly with evry other chipset, but Nvidias NForce 4. (tested 15 different) With NF4 it loads up well but the M$ PnP routine detects the Network management bus wrong (nvidia specific approach to

https://bugs.freedesktop.org/show_bug.cgi?id=47182 Bug #: 47182 Summary: GeFroce 6150SE nForce 430: misaligned reg 0x0060081D Classification: Unclassified Product: xorg Version: 7.6 (2010.12) Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium

https://bugs.freedesktop.org/show_bug.cgi?id=49243 Bug #: 49243 Summary: graphical corruption with GeForce 6150SE nForce 430 Classification: Unclassified Product: Mesa Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component:

Hi all, again i tryed Xen for normal home / development usage ... again i ran into a problem with it. There seems to be a problem with Xen 3.0.2 and nFORCE Motherboards. I used Xen 2 with nFORCE to and had a similar problem with performance earlyer and the List helped by telling to compile the Chipset Modules into the Kernel. I tryed this too on Xen 3.0.2 but with no sucess. The system boots

https://bugs.freedesktop.org/show_bug.cgi?id=50374 Bug #: 50374 Summary: nouveau fails to obtain EDID from NV11 (nforce IGP) Classification: Unclassified Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component:

Hi, I''m running snv84 on a SunFire x2200M2, 2 dualcore opterons, 8GB ram, 2 mirror sata disks (zfs). I tried to install both Ubuntu 7.1 Desktop and Fedora 8 into a HVM domU but failed everytime. The VNC-Server for the domU dies, but the domain still consumes CPU time, disks go idle after a while (zpool iostat or iostat show zero I/O). The domUs booted up fine, the installer started,

https://bugs.freedesktop.org/show_bug.cgi?id=47288 Bug #: 47288 Summary: System hangs with GeForce 6150SE nForce 430 Classification: Unclassified Product: xorg Version: 7.6 (2010.12) Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

http://www.isc.org/sw/bind/view/?release=9.3.4 SECURITY ADVISORIES * CVE-2006-4095 CERT Vulnerability Note VU#915404 NISCC 172003 * CVE-2006-4096 CERT Vulnerability Note VU#697164 NISCC 172003 * CAN-2005-0034 NISCC-UNIRAS 20050125-00059 CERT Vulnerability Note VU#938617 [ODiP] == Dmitry Grigorovich