similar to: National (US) callerid name resolution for yourasterisk box

Hi All, I've been in contact with a CNAM (caller name) directory provider. Currently they offer 2 products. One is CNAM via SS7 and the other is Directory Assistance data via http/xml. I am very interested in getting the CNAM data via http/xml (or DNS TXT). I suggested this to the sales rep and he told me that I'm the second person in less than a month who has asked for this. What

Does anyone have a MAX/APX with working ingress PRI calling name? I recently acquired a MAX TNT on the cheap and it's integrating fine except for one thing. In the 11.0.0 release notes, it is stated that ISDN calling name will, if present and permitted by presentation flags, be added to the From: and Remote-Party-ID: headers of the INVITE. I'm not able to make this happen. Pcap

Hi, I have read about SS7 recently and learnt that it is a signalling protocol used in PSTN for call management, setup, etc. The thing that I don't understand is how SS7 plays a role in VOIP. When I make calls between landline and Asterisk via PSTN, I don't need to do anything with SS7. Is it because the SS7 signalling is already done by Asterisk already? From the prespective of

Hi Folks, I'm trying to send CallerID Name information out to the PSTN via a PRI with Bell Canada with no success. With inbound calls (originating from the PSTN) CNAM is received successfully, and we've not had any similar problems with other Telco PRIs, so I'm stumped.

[cross-posted to -biz and -users since it could fall into either category] Interesting new product that has been introduced that I think some would be interested in here (at least, those users in the United States and perhaps Canada): CNAM delivery via IP lookup. The problem: inbound calls on many PRI connections, and also over many VoIP providers, do not include caller name. This means that

Hi, I am requesting for a E1 connection from my telco. They are asking if I want DSS1 or SS7, and I am stuck here. Could someone tell me the difference between the two? How should I decide which one to use? Thanks in advance for your help. Mark -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hey All, I'm just daydreaming here.. but what's the status of SIP-T in Asterisk? I haven't been able to find a whole lot of info on SIP-T but seems like just an extension of SIP. Right? Now if I had a PSTN Gateway (that is a SS7 gateway) that supported SIP-T, could I signal * with SIP-T from it and have asterisk utilize MGCP to sieze a particular DS0 on a remote DS1? Hmm.. What am

Does anyone know if there's a service out there to -- for a fee -- inject our DID into the LEC's CLI database so a called party gets our associated name? /rg

FreeCNAM.org is providing a free CNAM API for Open Source PBX users. This API queries a private CNAM database, and returns standard 15-Character CNAM results. Any entry not already in the database will be queued for investigation, and added to the database as soon as information is located. This system has access to several CNAM backends, and is not a party to any use-limiting or no-caching

I thought everyone should know this. Jorge, After reading your page in the http://voip-info.org/tiki-index.php?page=Asterisk+SS7 please advise Your U.S. customers that SS7 is not done the same way as in the rest of the world and the requirements are different. The U.S carrier's require 2 redundant links. I know this first hand because we run an SS7 network. CARDOSO Jorge Miguel wrote:

When are 'we' going to have this solution Steve? :) You keep talking about it, and we keep asking when it's going to come about. I know myself, SS7 will be a make or break for our continued use of Asterisk. Even if we had some price indications would be good, and/or a timeframe? Don't want to seem pushy, but it's been on the cards for quite some time now. Ben -----Original

I'm making outbound calls by placing call files in the asterisk outgoing directory. At times, the call would be hung by SS7 without even attempting (due to error in the outgoing number). I get the following on console: -- Attempting call on ss7/9297210213 for s at croom:1 (Retry 1) -- Sent IAM CIC=22 ANI=9134904821 DNI=9297210213 RNI= -- SS7 hangup 'SS7/callserver/22'

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page

>Freddi Hansen wrote: >> with boards from Aculab, we are replacing Aculab boards with Digium >> boards BUT we would need more >> Digium boards IF we could use both Digium and Aculab cards in the same >> server. The reason being that >> TE410P doesn't support SS7-ISUP so we continue using only Aculab cards >> in the servers that must support >>

Hi all, I'm being requested to deploy an?IVR service?using SS7. I've deployed Asterisk before using ISDN connection, but never with SS7. Can anyone explain me the different between using ISDN and SS7 ? What need I do now to change to use SS7 ?. Many thanks, Giang -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Would just like to inquire if anyone here has a setup of asterisk to send traffic to AS5400 connected to an SS7-PRI.? this is more of a AS54 question, as i've been reading and i always stumble upon PGW2200 as a requirement to handle SS7 signaling on the AS54. Has anyone able to send calls from asterisk to an as 54 with SS7-PRI without PGW2200? TIA Regards, Nhadie --------------

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server. This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total 4034145216, 4031118560 linkset siuc, link

Hello. I am new to this forum. If this issue has been discussed already, please inform me, but my STFW have indicated that it has not. If SS7 were available on * would it make commercial sense to use it? There are case studies on the web (courtesy of the Death Star :->) for ISPs with 10,000+ subscriber lines showing clear cost savings in transitioning from PRI to SS7 controlled IMT. My

Hi, Does anyone know of any projects that would allow you to use Redis in place of AstDB? By in place of I don't mean for what Asterisk needs but to store values. For instance for CNAM currently we need to use an AGI to connect to redis to pull CNAM. So in place of: Set(CALLERID(name)=${DB(CNAM/${CALLERID(num)})} it would be done with redis for example:

Hi, Does Asterisk support SS7? Google shows an old new post from Feb. 2002 stating that OpenSS7 would help add SS7 support to Asterisk, but presently OpenSS7 seems to be dead and I can't seem to find anything about it at Asterisk or Digium's sites. What happened? -- Regards, Tais M. Hansen ComX