similar to: IAX port

So this is what i've done so far... my extconfig.conf looks like this [settings] ;example => odbc,asterisk,alttable ;iaxusers => odbc,asterisk ;iaxpeers => odbc,asterisk sipusers => mysql,voip,sip sippeers => mysql,voip,sip voicemail => mysql,voip,voicemail extensions => mysql,voip,extensions -------------------- and my extensions.conf has the following lines in it.

Please can someone help me with the following two error messages: Error 1. I have loaded the Zaptel dirvers and everything is ok with ztcfg. I have configured Zapata.conf and everthing looks good but it apears the Zap channels dont load when starting Asterisk. When I make a call to one of the fxs port I get the following error message. -- Executing Dial("SIP/39-b204",

Hi, I am setting up a small call center using *. I have ZAP setup for incoming calls and IAX setup for agents. Agents login using AgentCallbackLogin. When customers call, it's getting picked up and when queue is trying to call back the agents, I am getting error. I am using CVS HEAD, and updated just now. The error is: -- Executing Answer("Zap/1-1", "") in new

Hi Steve; Do u mean by the Iaxy2 is that IAX digium gateway adaptor? If yes, then it has a codec limitation and it does not take ddns name (it needs IP address), also it is gateway and not IP Phone. Or u mean something else? Do u have a link for it so I can see it? Regards Bilal > >> > >>> Anyone knows an IAX IP Phone works fine and > tested? > >> >

Hello all, I hope this is not off-topic, if it is please let me know. I'm currently playing with an Asterisk at home, in order to get to know it's ins and outs. Very very impressive indeed. I've got it hooked up to my home phone line via a Wildcard clone board (Intel modem with Ambient chipset), and it works like a charm. Zaptel picks up the card as a generic clone, and works with it

Hi. I can't figure this one out. Hope someone can help me. root@pbx:# cat /etc/odbc.ini [Asterisk] Description=PostgreSQL asterisk Driver=PostgreSQL Trace=No TraceFile=/tmp/odbc.log Database=asterisk ServerName=localhost UserName=XXXX Password=XXXX Port=5432 Protocol=7.4 ReadOnly=No RowVersioning=No ShowSystemTables=Yes ShowOidColumn=Yes FakeOidIndex=Yes ConnSettings=

HI All; I want to use Asterisk for just Voicemail Server and I need a Dynamic creation of Mailboxes. My users 's Mailboxes are same as "Extensions" but I donot want to add mailboxes in "Voicemail.conf" Is there any way to create mailbox from Asterisk dial-plan ? Appreciate any suggestions Mohammad Mirzaee -------------- next part -------------- An HTML attachment was

I'm seeing a lot of these errors from a Samba 4.13.0 DC running on Debian Buster, the smb.conf is untouched from that which was created via a classic upgrade. =============================== Oct 24 10:25:43 srvr01 samba[26688]: [2020/10/24 10:25:43.886363, 0] ../../lib/util/util_runcmd.c:352(samba_runcmd_io_handler) Oct 24 10:25:43 srvr01 samba[26688]: /usr/local/samba/sbin/samba_dnsupdate:

ok so my table looks like this... REATE TABLE `sip` ( `id` int(11) NOT NULL auto_increment, `name` varchar(80) NOT NULL default '', `accountcode` varchar(20) default NULL, `amaflags` varchar(7) default NULL, `callgroup` varchar(10) default NULL, `callerid` varchar(80) default NULL, `canreinvite` char(3) default 'yes', `context` varchar(80) default NULL, `defaultip`

I'm going to try and lay out all the relevant information I have here in this one post. I can provide more info if necessary. ISSUE 1: Office A routinely looses connection to Office B. When typing IAX2 Show Peers, it will show as Unreachable. I issue IAX2 Reload and it will work again for 1-3 days (haven't narrowed the time down yet). My theory is that the DSL at Office2 is changing

Hi, I've troubles with setting up Asterisk Realtime and MD5 authentication. With clear text passwords everything is working fine. -- Registered SIP 'edwin' at 10.0.0.37 port 5060 expires 600 -- Saved useragent "Cisco-CP7940G/8.0" for peer edwin [2007-01-15 10:18:12] DEBUG[28528]: res_config_mysql.c:651 mysql_reconnect: MySQL RealTime: Everything is fine.

I have a brand new IAXy I'm playing with. I do not get a dialtone on the phone, or any response at ll on the phone. No sound, no dialing, no ringing. The phone and wire are tested and known to be good. I think I have it setup correctly. When I give the iaxprov command I get this: #iaxyprov 192.168.1.90 iaxy.conf 02: c0 a8 01 5a 05: 11 d9 03: ff ff ff 00 04:

According to my IAX-provider, an account has been created for me on their Asterisk-server... But the Asterisk CLI tells me this : asterisk*CLI> iax2 reload == Parsing '/etc/asterisk/iax.conf': Found [Apr 30 20:51:30] NOTICE[6391]: chan_iax2.c:10124 set_config: Ignoring bindport on reload [Apr 30 20:51:30] NOTICE[6391]: chan_iax2.c:10183 set_config: Ignoring bindaddr on reload

HI All; I want to use Asterisk for just Voicemail Server and I need a Dynamic creation of Mailboxes. My users 's Mailboxes are same as "Extensions" but I donot want to add mailboxes in "Voicemail.conf" Is there any way to create mailbox from Asterisk dial-plan ? Appreciate any suggestions Mohammad Mirzaee Mohammad Mirzaee -------------- next part -------------- An HTML

I am sorry to ask such a simple questions. I have been using Asterisk successfully for well over a year now on three servers. I was using CVS HEAD, and the last time I updated was sometime back in July. I decided to switch to the recent stable 1.0.3. I built zaptel, libpri and asterisk, and installed them in that order. All installations reported success. (I stopped asterisk before installing

Hi, I've provisioned an IAXy adapter on a network segment local to my asterisk server. Provisioning is fine, as is the registration and use of said device. Since the local address is private address space, I setup the public IP address of my Asterisk server as the alternate. When taking it to another location (NAT again behind a WRT54G), it doesn't seem to work. Here's my current

HI ALL HI MICHAEL; My name is mohammad and I am iranian.I have been trying to install oh323 channel but I come up with dead end. In fact it makes me crazy. plz help me michael. I saw mailing list and I trid serevel CVS headers such as , 2004-06-07( seven of june) 0r 2004-07-02( second of july) besides I use: 1-openh323 v1.12.2 2-pwlib v1.5.2 3- asterisk CVS (2004-06-07,

HI ALL; I found in the following page: http://www.voip-info.org/wiki-Asterisk+G.729+Licensing 1-If I could record all IVR promts in G729 format 2-If I could record voicemail in g279 format with """format_g729.c""""" then I donot need any g729 license (I suppose all my clients have g729 ip phones) My question is, how

On Sat, Oct 24, 2020 at 11:13 AM Rowland penny via samba <samba at lists.samba.org> wrote: > denied access to sysvol and a client is being denied updating its record. > > Does the DC use itself as the first nameserver in /etc/resolv.conf ? Same issue whether or not I point to itself first or to the local cache. > Who is user '5035' ? No clue, all users have a uidNumber

Hello, i configured samba and winbind in order to let domain users access folders shared by samba on linux. The configuration is shown later. Please note that idmap is configured correctly: root at kubuntu-test:~# wbinfo --user-info 'AGENZIA+manuelb' AGENZIA+manuelb:*:5035:5002::/home/manuelb:/bin/bash root at kubuntu-test:~# wbinfo -n 'AGENZIA+manuelb'