similar to: Comparision of IAX2, FWD, iaxtel etc etc.

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

Is anyone other than me having trouble dialing out via IAXTEL? I havn't changed my config files in weeks but seems that IAXTel calls (800 and FWD) stopped working in the past week sometime. Robert

G'day list, I am getting a lot[1] of traffic on my Internet link, ICMP messages from 69.73.19.178 telling me UDP port 5036 is unreachable (this IP address belongs to iaxtel.org). I see from the wiki that IAXtel supports only IAX2 from December 2003. Fine, however it looks like my * still wants to try and register using IAX1, and I can't find how to turn this off. This situation is

Hi All, Is this working for any of you? We're supposed to be able to dial FWD accounts through IAXTel by dialing 170099+FWD number. I don't ever seem to be able to do this even though I can dial 800 numbers through IAXTel. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc.

I didn't get any response at all to my last "request for status" on IAXTEL. So, when this happens, I attribute it to one of a number of things: 1. No-one knows. 2. No-one cares. 3. Everyone knows, but are too busy to reply. At any rate, my investigative side kicks in and I began searching thru the digest's I've gotten, looking for references to IAXTEL. Mostly it is

Does anyone know if the 1-800 iaxtel gateway is down? I've been trying to use it all day today and asterisk says it's ringing: Channel (Context Extension Pri ) State Appl. Data IAX2[iaxtel]/1 ( s 1 ) Ringing AppDial (Outgoing Line) SIP/2201-a253 (home 18888476626 1 ) Ring Dial IAX2/XXX:YYYY@iaxtel.com/18888476626@iaxtel But I

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX

<BLOCKQUOTE style="PADDING-LEFT: 8px; MARGIN-LEFT: 8px; BORDER-LEFT: blue 2px solid"> <DIV>Hello,</DIV> <DIV>&nbsp;can someone tell me what's wrong with this? I can't make toll free calls via iaxtel. Here's the definition in my extensions.conf</DIV> <DIV>&nbsp;</DIV><FONT size=2> <DIV>[iaxtel-trunks]</DIV>

Hi all, I spent most of the last weekend testing and trying to diagnose some mostly incoming call issues. I'll start with the easy one in the hopes it might have a positive impact on the others. First- I have an account with IAXTel. I can place calls to other IAXTel subscribers and also through IAXTel to landline toll free numbers and all works great. iax2 show registry shows I am

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

Is iaxtel down? Ive been getting this: May 21 19:23:42 NOTICE[29984]: chan_iax2.c:2782 auto_congest: Auto-congesting call due to slow response -- IAX2/Iaxtel-12 is circuit-busy -- Hungup 'IAX2/Iaxtel-12' is it down or am I doing something wrong?

I've searched WIKI and Archives but nothing. Im getting: -- Called username:password@iaxtel.com/1800somenumber@iaxtel Jun 21 17:04:12 WARNING[1158883520]: chan_iax2.c:5097 socket_read: Call rejected by 69.73.19.178: Unable to negotiate codec -- Hungup 'IAX2[Iaxtel]/8' == No one is available to answer at this time -- Executing Hangup("SIP/104-b8eb", "")

Hello, I just started using asterisk, and have a question. I have setup two asterisk servers, A and B. A has a Digium TDM400 11B card (1 FXO and 1 FSX modules) and is connected to the PSTN. B has same, but is NOT connected to PSTN. I want to configure B to call A via iaxtel, and connect to the PSTN using A's line. How can I configure iaxtel dial plan for B in extensions.conf? I want to be

Hi, I've been trying to dial out to a cellphone, but all my calls get redirected to 066 (the emergency number at my city, like 911) does anyone know how to fix this, any ideas,? does anyone from mexico has done this? Any comment will be highly appreciated, Regards, Claudio -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I cannot seem to accept incoming calls from FWD using IAX2. I followed the directions posted at www.fwd.pulver.com/advanced/iax I can make outgoing calls fine using IAX via FWD. When someone calls me from FWD I get the following message: Chan_iax2.c:5251 socket_read: Reject connect attempt from 65.39.205.121 Any ideas? Thanks, S.

Hi all I've been trying to make * work with IAXtel to no avail, all seems ok in the config but am not getting anywhere This is what I'm getting from console (user/pass/dest # changed for obvious reasons): DEBUG[1133735216]: File chan_sip.c, Line 3841 (check_user): Setting NAT on RTP to 0 DEBUG[1133735216]: File chan_sip.c, Line 4891 (handle_request): Check for res for phone1