similar to: Regular Phones - ISDN NT - FXS Adapters

Hello, folks! This is my first post here. I installed Asterisk from scratch and after reading a lot of information on voip-info and this mailing list I was able to get started. I can make sip-to-sip calls (just on a basic extentions structure, let's say for beginners) but now I'm trying to make this system works with my Teles ISDN BRI PCI card. I can make and receive calls through X-Ten

I've been wondering for a long time why my reinvite option is not working with Broadvoice anymore. It happend during the time Broadvoice was having a lot of issues, so I decided to wait. Recently I decided to test the same sip.conf with another VSP (SIPphone) and it worked fine! No issues on the reinvite. Note: clients and server using ULAW (only), no NAT or firewalls, public ip address and

Hi everybody. I'm trying to find a way to connect two (or more) extensions directly without being kept in the middle during the conversation but it won't happen. The purpose here is to have asterisk running on a low bandwidth (128Kbps) internet connection just as some kind of a proxy between some ip phones with high speed (10Mbps) internet connections. SER is not an option, for now.

Last week I asked about MWI indicators on wireless phones that would work with Asterisk. I sent a message off to Panasonic asking them about it because in their ads they specifically stated that the indicator works with and requires phone company voicemail subscription. The is the model TG5631. Specs here... http://www.amazon.com/Panasonic-KX-TG5631S-GigaRange-Cordless-Answering/dp/B000F4C2CA

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

Basically, pretty much all the 2 line cordless systems I've seen come with a built in digital answering system that I'll never use, the main problem with this is that these units don't support VMWI (visual message waiting indicator) with telco supplied voicemail. This is a problem because I'll be setup an Asterisk system in the next month or so to handle my 2 analog and 1

Has anybody have any experience using the KX-TGP500 Cordless DEC 6.0 "System" with asterisk ? I run a small asterisk server at home using two SPA3102s, and thinking of upgrading my cordless analog phones to something a little newer. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone have practical experience using inexpensive GAP-compliant DECT handsets with the Snom M3 basestation? When I asked Snom support, the answer was that 'basic functionality should work', but they didn't elaborate. I'm _guessing_ that means registering/unregistering with the base, making calls, and receiving calls (including presenting caller ID). They also stated that they

Hey Everyone, I am playing around with my * box, and I have a few different phones hanging off it it right now. I have a Cisco 7960 capable of g729, ulaw and alaw, I have a Cisco ATA186 with a Panasonic cordless phone attached to it, I have a Digum IAXy with a dumb analog phone attached to it, and I have a Linksys PAP2-NA with an AT&T 959 analog phone attached to it. I also have several

Using Asterisk 1.6.1.9, I'm looking for a way to "share an extension" between a SIP phone (Cisco 7940) and a SLT on a FXS port of a Cisco 1760 (via sip) -- at any given time I want to be able to pick up either phone and it should be "bridged" to the other - just like having two SLTs on the same copper pair. The goal is to have a cheap cordless telephone sit right next

does anyone know of a 2.4 or 5 ghz cordless phone system that has an ip base station? thanks

Hi Folks, Looking for feedback on the cordless phones with the Aastra 480i CT handset. Is voice quality comparable to standard consumer residential 2.4GHz cordless phones in the US$30 - $50 price range, or better/worse? How about handset and speakerphone quality for the main phone? Seems like there have been various big issues with firmware in past, but is it pretty stable now? Thanks,

Hello! Attached to the bottom of this e-mail is an edited version of an e-mail I originally wrote to Digium tech support regarding Ouch and Power alarm errors I have been receiving on my TDM400. It contains a great deal of detail regarding my setup. In the end, I have found that one of the 5 phones I'm trying to make work with Asterisk is contributing to the generation of these errors.

On Tuesday 10 May 2005 9:45 am, David Masure wrote: > Hi folks ! > > I bought two sipura 841 phones. I used to have GN Netcom headset which > I connect instead of the handset. The problem is that I don't have any > sound coming out the headset and I can't speak neither ! > ... > > Or....can anyone advise me on headset working with the sipura 841 ? I just use a

Hi All, I got a doubt about something I want to do with asterisk. I have this office (site a) with only a Panasonic analog PBX and another office (site b) with an Asterisk Box with an ADIT 600 . I want to interconnect both via IAX. Is it possible to put a new asterisk box in site a without the channel bank and put a card (FXS or FXO???) and connect it to the pbx as a CO line ? What

Hi, I have a problem with asterisk 10.8, hints and fxs dahdi phones: if a remote peer and an fxs phone gets connected and the remote peer hangsup, then asterisk sends the "Idle" state to notify the watcher before you hangup the fxs phone! Such a way if the user forgets to hangup the fxs phone (which is a cordless for example) then the operators will keep sending calls to him

Hello, I want to use Asterisk PBX in front of my old, legacy PBX. The legacy PBX can be outfitted with caller-ID and is already able to handle Calling Party Control Signal Detection (this is a Panasonic KX-TD1232 Super Hybrid PBX. My question is how would one enable Asterisk to control the TDM400P/FXS port to provide to the /FXO CO port on the legacy PBX, support for proper answer supervision/CPC

Hi all, I'm using regular analog phones with * and an ATA186, and I plan to move to cordless phones. But cordless phones usually have no way to flash hook cause there is no hook :-) I seem to recall there is a way to simulate a flash hook using dtmf tones in *, but I can't find which combination to use. More generally, where can I find all those magic cominations to put people on hold,

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it will not ring, although I can call out from it. I have also tried my GPO 332L

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the