similar to: ATA186 V2.15.ms upgrade

Hi I have a brand new ATA186 with the following firmware: Version: v2.15.ms ata186 (Build 020919a) I have been through the archives about how to configure it, but my colorful configuration web page does not have the same fields that people say I need to adjust. Even the examples on Cisco's web site don;t match. For example, I don't have the GtkOrProxy field, which is an important

Hi guys, sorry to be iterating this on the list once more, but I'm not able to get this stuff to work as I'd expect. So far, I've always managed to keep it out of NAT environments :-> My home LAN is NATed by a simple Draytek router. In the home LAN is an ATA186 with SIP. On the internet (public) is an Asterisk server. I have nat=yes in the sip.conf and the connectmode is set

i was looking but i dont find how do this: configure the password for the extensions read the messages and some other things related with this can some bady help me with some material or a explicit example. thanks in advance Rodney Acosta Coya.

i need a quotation for a E&M Digium card for my asterisk PBX where i can find it??? thank you in advance Rodney Acosta Coya.

I noticed a few issues with app_queue just wanted to know if its sip related or ata186 related: Ext 111 and Ext 112 are dynamically loged into the queue via AddQueueMember. Call hits queue with fewestcalls routing. Rings ext 111 if 111 doesn't answer. It rings ext 112. If for some reason ext 112 doesn't answer it rings back to 111. Again at this point ext 111 isn't answered it

hi all i upgrade a bt100 phone and it can't resgister with asterisk Dec 1 13:25:49 NOTICE[1112980400]: chan_sip.c:7519 handle_request: Registration from '<sip:@172.16.4.249>' failed for '172.16.4.226' is was working with the version 1.0.5.3 some bady now what is hapening? thanks in advance Rodney

Hi, I'm having trouble getting caller*id to appear on my phone connected to an ATA186, and being called from Asterisk. Does anyone out there successfully see callerid on their ata186-connected phone? The "From:" header in the INVITE to the ATA seems to have the "right stuff" - eg From: "Study phone" <sip:6002@195.217.255.45:5062>;tag=as412db061 But

Hi all: I've got some core dumps with chan_skinny. The client is ATA186 with v2.16.1.ms ata18x (Build 030814a). The * version is CVS-10/05/03-16:03:26. When I make a call, the phone connected with ATA rings only 1 time and * dies. Maybe I have some errores in ATA config. If someone has proven configs for ATA, please send me the details. Thanks in advance, Gus The logs: *CLI> Version

I'm trying to register with net2phone. I've already changed chan_sip.c, User-Agent: string to say "User-Agent: Cisco ATA 186 v2.16 ata18x (030401a)". But still I'm getting the error msg. Here is the debug msg: IP Address is xxx.xxx.xxx.xxx 11 headers, 0 lines Reliably Transmitting: REGISTER sip:66.33.146.12 SIP/2.0 Via: SIP/2.0/UDP

I've installed Asterisk and configured an ATA-186 as described at this link: http://www.djernes.org/~shawn/ata186.htm Unfortunately this guide abruptly ends before it explains how to deal with the sip.conf and extensions.conf files. So I left extensions.conf alone and my sip.conf looks like this: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0

I strange error messages when using mgcp and ata186 . This session is simply dial into 600 demo extension - echo test ... Handling request 'NTFY' on aaln/1@10.0.1.19 Transmitting: 200 29 OK to 10.0.1.19:2427 -- Endpoint 'aaln/1@10.0.1.19-1' observed '0' -- MGCP Asked to indicate tone: on aaln/1@10.0.1.19-1 in cxmode: sendrecv Posting Request: RQNT 306

Thanks, Mark! Here's a summary of what one needs to do in order to get NAT working with Asterisk. Please note that I have a Cisco ATA-186, and your experience may be slightly different based on the equipment you're using. You'll need to have a CVS updated version of Asterisk as 2003-03-06 ~2:00 PM EST. NOTE: This currently works for outbound calling only, not inbound. In other

Eero, where did you installed this nrpe package? is selinux running enforcing > mode (getenforce command), try disabling with setenforce 0. why you are > running it under xinetd as usual way is to run it as nrped daemon. > For NRPE I usually do a source install with these flags: ./configure make all make install-plugin make install-daemon make install-daemon-config make install-xinetd

This is strange... Do you have SSL aktive on both systems? Run nrpr localy without parameters (this should return some nrpe stats) and check ldd for libssl. Am 01.05.2015 07:32 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > Hi Eric, > > Thanks for your reply. I do have nrpe running under xinetd on the host I'm > trying to monitor. > > And running the

Am trying to install perl module "File::Find", but not able it gave the following cpan[1]> install File::Find CPAN: Storable loaded ok (v2.15) Going to read /root/.cpan/Metadata Database was generated on Thu, 21 Aug 2008 02:03:21 GMT Running install for module 'File::Find' The most recent version "1.12" of the module "File::Find" is part of the

Hi Eric, Thanks for your reply. I do have nrpe running under xinetd on the host I'm trying to monitor. And running the nrpe checl locally: [root at ops:~] #/usr/local/nagios/libexec/check_nrpe -H localhost NRPE v2.15 [root at ops:~] #grep only_from /etc/xinetd.d/nrpe only_from = 127.0.0.1 216.120.248.126 And I do have port 5666 open on the security group for this host.

> > is it working on localhost or not???!!! it could be selinux problem also, > if context is not correct. It's working on localhost: [root at puppet:~] #telnet localhost 5666 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. I notice if I stop the firewall on the puppet host (for no more than 2 seconds) and hit NRPE from the monitoring host it works:

well. how about trying default setting and running nrped without xinetd. -- Eero 2015-05-01 14:14 GMT+03:00 Tim Dunphy <bluethundr at gmail.com>: > > This is strange... > > Do you have SSL aktive on both systems? Run nrpr localy without > parameters > > (this should return some nrpe stats) and check ldd for libssl. > > > I don't seem to have that command.

Can i register a cisco 7902G with asterisk????? what i have to do??? thanks in advance. R -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041130/12bf3c06/attachment.htm

Hello All, I am trying to get some ATA 188 units to register with my Asterisk box over SIP. I continue to get the same "401 Unauthorized" Error when they try to register. If I turn Sip registration off, I can use the phones without any problems with a static IP assigned in my sip.conf file, but I can't get the second phone port working. I've set up two separate logins both