similar to: Headsets for Polycom Soundpoint 500/600

What headsets have people found work well with the Cisco 7940 and 7960 phones? To date, I have tried a couple of the headsets within the Plantronics H series (H41-N), and noticed that the volume of my speaking is lower over the headset than on the regular handset. I am currently looking for headsets that are known to work well. I do know that Cisco lists the H-91 and H-101 as certified to

Hi, I've been asked for a headset recommandation for Polycom SoundPoint IP phones. Since I believe they use a pretty standard headset jack (correct me if I am wrong) it's really a general recommandation on headset. Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello! I am selling hardware I have been using in various Asterisk test installations. If you are interested in buying all or any of the following items please reply off list. I got a few * X100P clones * Sirrix PCI4S0 ISDN BRI cards (+ 1 Sirrix S0 voltage/power supply) * 1 Polycom Soundpoint IP 500 (+ Plantronics headset) * Conrad HFC-S cards to give away. Some of the pieces are unused,

I bought a couple Polycom Soundpoint 300's, and have them working nicely with SIP... but I'd like to be able to do automatic config via FTP, but it requires some XML config files. The docs discuss them in detail, but I can't seem to d/l them from Polycom. [No, it doesn't appear to be on the CD that comes with the phone.] I've created an account at Polycom's tech support

I have been looking for analog phones for my * system that work with our plantronic amplifiers and headsets. The problem I am having with the Aastra phones that I have purchased (PT-390, 9116, 9120, 8009 ), is that they don't seem to stay hung up unless you physically hang up the handset everytime you finish a call. I have even purchased the Aastra 9120 which sais it has on-hook

Hello everyone, I have just received 3 brand new Polycom SoundPoint IP 600 from "voipsupply.com" and I have the exact same problem on all of them. When I receive a call, the phone is ringing correctly but when I answer it, it takes exactly 10 seconds before I can hear the caller. I also have SoundPoint 300 and 301 and I don't have that problem with those. I'm using Asterisk

Has anyone been able to get the minibrowser on the Polycom SoundPoint IP 500/600 phones working? If so could you share the relevant sections of your config with me?

We recently took a few Polycom Soundpoint IP 500 to test out in Asterisk environment. So far it has been good. Call Hold, Transfer, DMTF etc. However, I do notice every now and then the Polycom fails to register with Asterisk. Asterisk console outputs the following: Feb 3 13:02:32 WARNING[278546]: chan_sip.c:2365 __transmit_response: Unable to determine sequence number from '' Feb 3

Hi everyone, I have a user that needs a little extra volume on his Polycom IP 601 phone set for all calls (beyond what the volume control currently offers). Is there a provisioning setting for this anywhere? (I'd like to avoid a separate amplifier between the phone and handset if possible.) Alternatively, is there a way to have Asterisk 1.4.x boost the volume to a particular SIP device

Hi I am looking for a good wirless headset to use with the Polycom Soundpoint 501 phone. I would greatly appreciate hearing from anyone with good experiences with a specific device. Thanks -- Jim Freeze

Could not find your post for 4 months ago. -------------- Original message -------------- From: "Anton Krall" <akrall-lists@intruder.com.mx> > Yes, check a post that I made about 4 months ago, I posted the cofig for > setting the speaker, handset and ring volumes .. > > |-----Original Message----- > |From: asterisk-users-bounces@lists.digium.com >

Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goes dead with two red lights on. The one in the top right corner

Hi Folks; I just bought a Polycom SoundPoint 500 off of ebay after having spent way too much time trying to get updated sip images for our cisco phones. The phone I bought didn't have an AC power adapter; Could someone please tell me the volts & amps that the dc plug that comes with the phone puts out? Thanks! Mike

I have a Polycom Soundpoint IP 500 that I have been using with Asterisk for a few weeks. It has been working OK, no major problems other than a freeze up every now and then, until today. The power apparently went out last night and for some reason the phone appears to be working but I keep getting the following errors repeating over and over in my Asterisk log file (IP's X'ed out): Aug

Hi We've setup an Asterisk PBX recently and I encountered the following problem: When [mac address]-registration.cfg file includes the FQDN of the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even try to) register with the Asterisk PBX unless the DNS (it asks) successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this happen to anyone else? PS - The

I'm trying to develop a company phone list accessible via the minibrowser feature on the phone. The pertinent section of ipmid.cfg is as follows: <microbrowser mb.proxy=""> <idleDisplay mb.idleDisplay.home="http://server/polycom/index.html" mb.idleDisplay.refresh="300"/> <main

Hello all, I need the bootrom.ld file to set up some Polycoms I have Platform: Model=SoundPoint IP 330, Assembly=2345-12200-001 Rev=A I've publiched on my FTP files downloaded from http://support.polycom.com/PolycomService/support/us/support/voice/soundpoint_ip/soundpoint_ip330_320.html (3.2.3 combined and split zips) but my phones are still showing the message: "error, application is

Hello list, anyone have a manual for the webGUI of the above phone ? Just bought a Polycom Soundpoint IP300 and on the site of Polycom I see a user manual and a administrator's manual but none of these 2 guides explain the fields in the webGUI. Trying to understand the difference between the 'server-'variables in the 'SIP'-section and the 'server'-fields in the

Thanks, I was afraid to try and change gains that I didn't know what they did simply because I don't want to blow a speaker or something.. :) I'll try it today. The only thing I haven't figured out is how to set a default ringer in the configuration file, set my time to EST w/ Daylight Savings and when receiving incoming calls if it's possible to see NAME & NUMBER instead

Hi I'm new to this list, so please forgive me off-topic or RTFM-questions. I have an asterisk/elastix driven phone-environment using Polycom SoundPoint IP 650 as extensions. When adding just one custom ringtone (~57KB) in a proper format (ML.wav: RIFF (little-endian) data, WAVE audio, ITU G.711 mu-law, mono 8000 Hz) the phone boots well. But after I have chosen the custom ringtone as my