Displaying 20 results from an estimated 4000 matches similar to: "zaphfc sound problems"
2004 Dec 19
1
BRI Error with zaphfc
Hi
I have a small ISDN PABX , (BRI) at home - Siemens Gigaset 4175 which has
cordless DECT extensions.
I have set up asterisk on FC3 with two HFC cards and I am using the latest
bristuff.
I am trying to use * between my ISDN line and my PABX.
One card is in TE mode and can receive and make calls OK. I can make and
receive external calls to a SIP phone.
I cannot get the other card to talk to my
2006 May 24
1
Problem after upgrade to 1.2.7.1
Hi
Last friday I have upgraded to Asterisk 1.2.7.1 (bristuff-0.3.0-PRE-1p.tar.gz). Since that I have a problem with my Asterisk box. I am receiving these messages:
May 24 09:30:11 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
May 24 09:30:12 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
2004 Jul 30
2
zaphfc hardware & sound trouble
Hi,
I've been learning asterisk for a couple of weeks now - and it worked for me
as faar as standard configurations where concerned (sip/iax
outbound/isdn4linux & capi with AVM Fritz!, Digium X100P FXO).
Now I recently I'evaluating to use asterisk as a replacemnt for our
companies (15 employees) legacy pbx system and I'm experiencing multiple
problems with the hfc isdn cards:
2005 Feb 13
1
bad sound ISDN bristuff
Hello * users
I've problems with sound quality on zaphfc
Asterisk works fine good sound quality.
If I do "make load" in the bristuf.xx zaphfc dir then sound quality
drops directly.
Even if I don't load the chan_zap in the modules.conf
I use this config on more (even old 400Mhz machines) and works correctly.
Looks like an hardware problem but I can't find it.
I don't
2005 Aug 26
4
system crash
We just had * crash on us - no calls could be made / received. We had to
kill -9 the * process.
Checking the error logs, I came across these two lines, with the times
matching the crash:
Aug 26 13:48:00 WARNING[19282] pbx.c: Local/6024@AgentQ-94ce,2 already
has PBX structure??
Aug 26 13:48:00 WARNING[19282] channel.c: Thread -1105359952 Blocking
'Local/6024@AgentQ-94ce,2', already
2008 Feb 13
2
MWI problem with Siemens Gigaset S675 IP
Hi list,
Before purchasing a number of Siemens DECT SIP phones, the Gigaset
S675 IP, I read that the problems with MWI had been fixed with the
latest firmware version (see
http://www.voip-info.org/wiki/view/Siemens+Gigaset+S675IP). Now I'm
not so sure that's the case.
After setting up a network mailbox for one of these phones, as well as
an Asterisk voicemail account (ext.
2006 Nov 29
3
Siemens Gigaset C450 IP vs S450 IP
I've just ordered a Siemens Gigaset C450 IP cordless
IP/DECT phone, given that it's supported by asterisk
http://www.voipuser.org/review_41.html
However, I see that a slightly better Gigaset S450 IP
is available for only a slight price premium.
Are there any user experiences with the S450 IP?
--
Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org
2004 Sep 29
0
Big zaphfc issues
I have a "Cologne Chip Designs GmbH ISDN network controller" in my
asterisk box, and an ISDN line connected up to it. I downloaded the
bri-stuff 0.1.0-RC4a package from junghanns.net and used that to compile
asterisk using these instructions:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20zaphfc%20install
When I try to call my asterisk box, my sip phone rings twice and then
the
2006 Jun 09
2
Unicall acting really funny
Hello guys!
I hope you bare with yet another newbie on the list! :-)
I am trying to setup an asterisk installation in between a Siemens
HiPath 3800 and my local carrier (Telefonica/Brazil). Both running R2.
ISDN is not an option on the carrier. :-(
I could apparently setup both E1s just fine according to zttool
(both OK with no alarms) but, and this is where it starts to get
2010 Sep 13
2
How to send SMS to Gigaset phones ?
Hi,
Searching this list archives, I couldn't find a definitive answer to my
question :
how to send SMS to Gigaset phones ?
My goal is to send Alert SMS such as "This phone system will be stopped in
5mn for maintenance" to every terminal (SIP phones and Gigaset DECT phones).
(So at the moment, I'm not looking for way to send SMS from handsets).
I could successfully send 1 short
2004 Jun 16
3
ZAPHFC - only for * 0.7.2?
I've got Zaphfc working running Asterisk v. 0.7.2
Then I have tried with Asterisk V. 1.0 and the latest from CVS - with no succes.
Has anybody got zaphfc working with newer version than 0.7.2 ?
NR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040616/32481fca/attachment.htm
2005 Aug 08
2
zaphfc syslog flooding
Hi,
my zaphfc is flooding my syslog with two messages (even without asterisk
running). Is this "normal"?:
--------------------------------------------------
zaphfc: bchan rx fifo not enough bytes to receive! (z1=1360, z2=1353,
wanted 8 got 7), probably a buffer overrun.
zaphfc: dropped audio (z1=2712, z2=2695, wanted 8 got 17, dropped 9).
With Asterisk running (asterisk -vvvvvgc)
2005 Mar 08
2
zaphfc error
I have some problems starting asterisk with a hfc card using zaphfc:
[chan_zap.so]Mar 8 17:53:06 WARNING[2447]: loader.c:258 ast_load_resource:
/usr/lib/asterisk/modules/chan_zap.so: undefined symbol:
ast_retrieve_call_to_death
Mar 8 17:53:06 WARNING[2447]: loader.c:391 load_modules: Loading module
chan_zap.so failed!
I'm using asterisk from debian/sid:
Asterisk
2008 Aug 21
2
Siemens Gigaset IP in USA (S685 IP in particular)
For some unfathomable reason, Siemens USA doesn't offer the Gigaset IP
range in the U.S. I'm particularly interested in the Gigaset S685 IP.
Since it's DECT 6.0, and there's an English (UK) version, I'm thinking
it should work just fine, after dealing with the walwart issue (and
maybe caller ID signalling).
Anyone imported one from the UK and using it in the US? for how
2005 Jan 21
3
zaphfc no callerid incoming to SIP phone but visible in logfile
Hello,
I've added a ZAPHFC card to my CAPI based system. Calls coming in via
ZAPHFC do not forward the caller id to the SIP phones. Calls coming in
via CAPI do forward the caller id to the SIP phones.
Any and all help is greatly appreciated.
The (hopefully relevant) conf file excerpts are:
extensions.conf
===============
exten => 807440,1,Answer
exten => 807440,2,Noop
exten =>
2005 May 25
7
zaphfc: empty HDLC frame or bad CRC received
Hi, i've downloaded/compiled/installed the bristuffed asterisk
Asterisk 1.0.7-BRIstuffed-0.2.0-RC8a
and i'm using it with an hfc card. It runs on a debian 3.1 sarge machine
with kernel 2.6.11. Asterisk works well if i configure the card using
isdn4linux.
I'm having problems dialing out (not tried the input yet).
This is the output from asterisk:
-- Accepting AUTHENTICATED call from
2005 Mar 23
1
Zaphfc + PRI card problem
I have the latest bristuff, a zaphfc card for external calls and a PRI
card for connecting to a PBX as a channel bank.
With a BRI I would expect to be able to have two incoming calls going at
the same time, but when I try it, one call connects and the other gives
the following console message, a busy tone, and then a hangup:
Mar 23 19:18:35 WARNING[5595]: chan_zap.c:7512 zt_pri_error: PRI:
2005 Jan 23
4
Florz patch for zaphfc
Has anyone had any success using the Florz patch for zaphfc ?
I have a * system with 2 HFC cards which is working fine with 2 PTP ISDN
lines however the users are complaining of crackles on the line which I am
assuming is related to the IRQ issues raised by Florz.
I have tried to use the patch but it errors trying to patch zaphfc.h
Any help would be appreciated.
Regards,
Stuart
--
No virus
2006 Jan 14
4
Ugly echo cancel, with Bristuff/Zaphfc
I'm using bristuffed Asterisk with ISDN/ZAPHFC
I have VERY ugly (outgoing) sound through ISDN/HFC if echocancel=yes in
zapata.conf, but without echocancel I have bad (incoming) echo
Through PSTN/FXO sound is ok with or without echocancel.
I tried other echo cancellers (in zconfig.h) two times:
ECHO_CAN_KB1 (this was default)
ECHO_CAN_MARK2
ECHO_CAN_MG2
after any change I compiled (make
2005 Aug 18
1
Zaphfc.ko module error
Hi Guys
I have been running a test server for a few days now with * 1.0.9 bristuff
RC8n. I had a power failure and the test machine was not on the ups. When
power was restored I found the following error: FATAL: Error inserting
zaphfc (/lib/modules/2.6.11.4-20a-default/misc/zaphfc.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
My dmesg output: zaphfc: unsupported