Displaying 20 results from an estimated 1000 matches similar to: "Asterisk and Broadvoice, no incoming voice"
2005 Jul 24
1
Help with Asterisk@home and Broadvoice incoming calls..
Hello everyone,
Well here is my initial posting to the list, and I will admit Asterisk is new
to me. I just got everything running here a couple days ago, so still learning
the ropes for sure.
OK, here is my problem. Currently I have it setup talking to a couple Cisco
IP phones, and some Xten softphones, this works great. I also got an account
with FreeWorld Dialup using IAX2 and that
2005 Sep 05
2
USING TWO ACCOUNTS WITH BROADVOICE
Hi,
I have two accounts with broadvoice.
Now, I want to be able to distinguish between them.
I though that this would be simple by adding "/EXTEN" at the end of the
register statement. For example:
register => num1:pass@sip.broadvoice.com/1000
Unfortunately, this is not working.
When I call into my box I hear busy tone.
My config looks like this:
[root@voip asterisk]# cat sip.conf
2004 Oct 05
2
broadvoice connection problem
All,
I signed up for a broadvoice BYOD plan over the weekend (very
excited about their offering) and after about an hour I had asterisk
registered and was making in and out bound calls. However, the next day
(without changing anything) I couldn't call in or out and haven't been able
to get it going again. I can connect using a softphone (X-Lite) and make
calls in and out
2008 Mar 16
1
Problem with incoming calls on Broadvoice after upgrade to 1.4.18
Hi all,
I just upgraded to Asterisk 1.4.18 a few days ago and I don't use
Broadvoice TOO often, however I have a Vermont number with them and so
my mother in law calls it to talk to my wife once in a while, so
that's why it took me so long to notice it wasn't working. Anyway,
when she calls she gets a busy signal (as I've tested when calling it
from my cell).
When I enable
2005 Feb 26
1
Dial out through Broadvoice
Hello all,
When I call the Broadvoice number all is good.
When I try to call out through DISA on my broadvoice line i get the following:
Executing Dial("SIP/147.135.0.129-0815bc60",
"SIP/16037862111@proxy.bos.broadvoice.com|30") in new stack
-- Called 16037862111@proxy.bos.broadvoice.com
-- Got SIP response 480 "Temporarily Not Available" back from
2005 Mar 04
2
Broadvoice + incoming call works only for ~2 minutes
Hi, all.
The asterisk setup is working fine, receiving calls via broadvoice "initially". ?
When call comes in via broadvoice number, asterisk picks it up and routes
correctly, as long as the call came in within ~2 min from the previous one.
In other words, as long as a call comes in within ~2 min since the previous one,
asterisk will answer the call. However, if the call comes in
2004 Jul 21
2
Anyone else having Broadvoice Problems?
Suddenly my broadvoice will no longer register. It was working fine for over
1 month without a single problem, now I get a SIP registration timed out
message.
I called them, and I was told that they are experiencing problems, and they
hoped to have it resolved ASAP.
I called them at around 10 AM EST this morning. It's now 8:30 EST PM, and I
still have not heard back, and the problem is not
2005 Jan 26
4
A working BroadVoice config example
I finally got my incoming and outgoing to work on Broadvoice with a
configuration file that is no where close to the one given by them.
Here it Is (sip.conf). For others who have a working config could u please
share so that I could compare. Thank You
[broadvoice]
type=friend
username=[number]
fromuser=[number]
secret=[password]
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
2005 Apr 07
1
"404 User Not Found" when calling between two SIP UA's
The configuration for kphone in sip.conf:
[177204]
;Turn off silence suppression in X-Lite ("Transmit Silence"=YES)!
;Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed
type=friend
;regexten=1234 ; When they register, create extension 1234
;username=xlite1
;callerid="Jane Smith" <5678>
host=dynamic
;nat=yes ;
2005 Jan 27
1
Stumped by BroadVoice SIP
Hello guys.
I am a fairly new user to Asterisk, and I'm just having a tough time.
My goal is to set up a VOIP PBX. I have signed up with a BroadVoice
number, and I have three systems with SIP phones.
The PBX and the SIP phones are all behind a Cisco PIX running NAT.
I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with
little luck.
The SIP phones are two X-Lites on
2005 Jul 13
3
Meet Me Configuration
I am trying to configure MeetMe so that external callers can enter the
conference rooms after an IVR menu. I have created Conf rooms for all
internal Ext's with a prefix of 8. When I call into the system from my
vonage trunck the IVR picks up but will not let me dial a conf room. It
tells me it is a invalid extension.
Can anyone help with a sample conf on this?
Thanks,
RC
2004 Nov 26
2
Help with broadvoice outbound plz... ;)
*sigh*
Ok, I have fought and fought with this. I have read all the FAQ's, I have
scanned the list archives. I can receive calls on * from my Broadvoice
acct, but I cannot place calls...
I have the 'World Unlimited' plan, and like 5 area codes that are local to
me in Dallas.
Can anyone help me?
here are my config files...
- sip.conf -
[general]
context=default ;
2005 Mar 05
7
BroadVoice configuration changes for Outbound
Today, We have added INVITE Authentication. This seems to bring a large
amount of problems to people in the way since they can't make outbound
calls. Here's what needs to be done. You need to add three variables to
your peers or friends, username, authuser, and secret.
username=<phonenumber>
authuser=<phonenumber>
secret=<registration password>
Dan
2006 Oct 13
1
Unable to create/find SIP channel for this INVITE & Broadvoice
I've setup Asterisk to work with Broadvoice for both incoming and outgoing
calls. I can make outgoing calls, but when I try to receive an incoming call
I see the following message on the console:
[date] NOTICE[8661]: chan_sip.c:13178 handle_request_invite: Unable to create/find SIP channel for this INVITE
It's registered with Broadvoice:
Name/username Host Dyn
2004 Jul 28
3
Workaround for BroadVoice and possibly others...
I have an idea, tell me if this wouldn't work... I know it's really ugly,
but it might help some people until we can get round robin DNS checks for
peers...
Since * does not do GetHostByName() again until you reload your config, and
BroadVoice and I'm sure other sip providers are using round robin DNS, why
not create 2 [<your server here>-out] contexts in sip.conf, and then in
2005 Mar 18
1
Broadvoice hangs-up / disconnects after about 30 deconds
I have just installed * from the latest CVS and I can make calls via X-Lite to outside numbers but for only 30 to 35 Seconds at a time then Broadvoice will hang up on me but X-Lite will not know it. Once I hang up X-Lite then I will get the following error message:
Spawn extension (default, Number-I-Dialed, 1) exited non-zero on 'SIP/200-6a22'
-- Got SIP response 404 "Not Found"
2005 Jun 11
1
SIP Connection Timing Out BroadVoice
I just signed up and configured a SIP connection from BroadVoice. It
works great. This issue I have is that it seems after a couple calls
(or a certain amount of time) Asterisk doesn't seem to be receiving
these calls anymore. It seems as if BroadVoice is not redirecting the
call to my Asterisk.
Asterisk still seems to be ready for the call:
*CLI> sip show registry
Host
2005 Mar 17
1
Last guy to get BV working outbound?
I have tried everything to get BV working outbound. All worked fine
until the BV change last week. I called BV and they changed me to sip
gen with a new password. I stripped my Asterisk server to one phone on
Zap/1 until I get this working. The same BV account works fine with a
SPA-3000 so I don't suspect a firewall problem.
Symptoms: Asterisk registers with BV Ok
Incoming calls work
2004 Jun 01
2
BroadVoice usage?
Hi all,
I've been trying to use BroadVoice as a SIP service provider. They don't
officially
support * but are helpful when it comes to answering questions for setup
parameters. They claim they have no firewalls or access lists that need to be
set up so I can get access to their servers.
However, something's still not quite right when I use the parameters.
It looks like our Asterisk
2005 Jan 05
4
Broadvoice / * re-register issues
HELP!
Ok, so I have the following SIP.CONF:
[general]
context=default
port=5060
bindaddr=10.1.1.200
externip = XX.XXX.XX.XX
localnet=10.0.0.0/255.0.0.0
disallow=all
allow=ulaw
allow=g729
allow=g726
allow=alaw
register =>
##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234
[sip.broadvoice.com]
type=peer
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com