similar to: Fast Busy

G'Day All, Can anyone give me some direction in setting up the TFTP server on my RadHat ES3 box? I did quite a bit of reading, but I think I am more unsure now than before. I found the information nebulous. TFTP is already installed. I am trying to determine where the root directory for the tftp services is located so I can copy the CISCO 7960 firmware files onto it. Thanks.... Ferg

G'Day All. So I got the TFTP server all set up -thanks to much help from this list- the 7960 found it and updated to SIP the first firmware P0S30200. What I am now trying to do is upgrate through all the versions, as recommended, to the latest version, P003-07-3-00. I thought this would be accomplished by simply changing the sole line in the OS79XX.TXT file to P0S30203 and reboot the phone.

G'Day All; So I purchased a Cisco 7960 and am now trying to get it configured for *. No can do without the variuos files/images through a FTPF server. I configured the TFTP server on my RHES 3 box, now to get the required CISCO files. So I contacted CISCO to purchase the required maintenance contract so as to gain access to the download area for the files/images. -WHAT A FRUSTRATION!!-

G'Day List, Can someone help me out a bit please. I just installed Fedora Core 3 on a Dell Power Edge 400 SC and am trying to install * I am following http://www.voip-info.org/wiki-Asterisk+Step-by-step+Installation After running: cd /usr/src/asterisk make clean make make install make samples The instructions says: Configuring Asterisk - Login to your server as user

G'Day All What do I type at the command line to stop and start * on a RedHat ES3 box? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041202/f9c92727/attachment.htm

Thanks everyone for your feedback, especially Mark. I now have the ALL the files I need. My order still stands for the $8.00 product from CISCO but the CP7960 dealer sent me all the files. Now I will move on to completeing the setup of the TFTP server. Thanks again -----Original Message----- From: Michael Loftis [mailto:mloftis@wgops.com] Sent: Friday, February 18, 2005 7:51 PM To:

G'Day All, Greetings and best wishes. Many moons ago I had an Asterisk system running. Steve Totaro helped me quite a bit. Just now I installed Asterisk NOW 1.5 Beta, and am at the command prompt.....I thought there was a GUI with Asterisk NOW. Anyway, where can I find the install/config documentation or how to launch the GUI, as I have look around on the site but cannot locate it.

G'Day All, Can someone help me out please. My new CISCO 7960's manual says I have to setup a TFTP server. Googled it and got a little understanding, but from * standpoint, well I am still a lost. Can I set this tftp server on the same * box? Can in be on a WinXP box? Which tftp software would you recommend? Thanks much. BTY: Does anyone have a How-To on getting the 7960 fully configured

Hi List, Using Lattice, I have created a plot of histograms showing Fork Length by Year. The plot shows the histograms in 3 columns and 5 rows. Using the as.table=T function I can get the years to start on top. However, what I would like to do is have the first year start in the top left (column 1, row 1; as it is now) and add the subsequent histograms to the plot going down the column and then

G'Day All, How do I fix this: I receive a call at the extension. Press the hold button. Music on hold starts. When I place the handset back on the cradle, the call gets hung up/disconnected. The Phone is A GrandStream Budge Tone 100. Thanks

G'Day All, I have read a lot but still have not got the concept in my head. My ultimate goal is to setup asterisk with VOIP at my job but am working on setting one up at home first. I have a 10/100 network at home with Cable broadband and would like to setup a server with RedHat and Asterisk. Do I MUST HAVE a VOIP provider so as to be able to make and receive calls VOIP? What should be my

Same here. I called them yesterday plus email and still no reply. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of brett-asterisk@worldcall.net Sent: Friday, January 21, 2005 10:28 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Webmin Module for Asterisk (and

G'Day All; I am a little unsure on how to get Music On Hold to work. Please critique my extensions.conf. ????? Thanks ; SIP 5001 exten => 5001,1,Dial(SIP/5001) exten => 5001,2,Voicemail(u${EXTEN}) exten => 5001,3,Hangup exten => 5001,102,Voicemail(b${EXTEN}) exten => 5001,103,Hangup Thanks -------------- next part -------------- An HTML attachment was

-----Original Message----- From: Ferguson, Michael Sent: Tuesday, February 01, 2005 11:35 AM To: 'asterisk-users@lists.digium.com' Subject: Messaging with * and eyeBeam G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's

G'Day All How do I configure the mailer on the asterisk box to send a FQDN as a part of the message so that ISP's doing reverse DNS does not drop the asterisk mail? Thanks

<P>I am running on Core 3 also with a voicepulse account.</P> <P>I found this document quite helpful....www.voip-info.org/tiki-print.php?page=Asterisk+Fedora+Core+3</P> <P>I did deviate in that I ran my make of Asterisk itself as follows</P> <P>cd /usr/src/asterisk</P> <P>make clean <BR>make linux26 <BR>make install <BR>make

G'Day All, Any recommendations for getting a few DID's for Jamaica? Area code 876? Thanks Ferg

G'Day All, I just received my new 7960 and, while I am still reading the manuals from the web and the "At a Glance" booklet that came with the phone, I am hoping that someone can point me to a some real quick steps to get the phone registered with my * server and in working order. I will keep reading the docs though. Thanks Ferg

Has anyone had any success with the mongrel_secure_download gem? I keep getting "connection reset" errors. -- Cheers, Kevin

Yeah I just noticed that the latest mongrel gem for win32 doesn''t have the proper dependency for ''daemons''. This of course causes the require to fail. Any chance at getting this fixed for future gems? :) Thanks Josh Ferguson