similar to: Re: CentOS on Compaq Proliant Rackmount Servers -- whoa!

Greetings, Can anyone relate experience(s) installing CentOS on Compaq rack mount servers units please? Easy no problem, easy some issues, or ghastly do not do it under any circumstances... ;) Basically, I'm looking at some used/refurb dual PIII units and will run RAID on Compaq built in SCSI or is it easy to pop in some 3ware SATA in them? Let me know in terms of CentOS 3 and/or 4 please.

Hi Denny. Nice, i have entered the HP R5500 XR to the drivers.list in the Testing and Development tree. Some info for you when you setup the nut. The shutdown_delay of the driver is internal to the ups. It calculate the time it can run after low-battery with the load. So when it comes to OB LB it starts the shutdown_delay and power off after it runs out. This is the normal way, as you would

Hi, I have an HP R5500XR and a Compaq R3000XR that I would like to use with nut. I searched the compatibility lists and the mail list archives but couldn't find anything. They both have 9 pin serial ports. Can anyone give me any information about them, and if they are supported by nut? Thanks, Denny Fox

greetings, for those of you in the know, may i have some assistance in helping to make better decisions in purchasing more used server toys to install CentOS on please? :-) in the Compaq Proliant Rackmount DL380 line, the one that looks like the older 1850R is called a G1 meaning Generation 1 right? and then the DL380 G2 is a redesign that is gray and just has 6 drive bays up front correct?

I get this message at CLI. what does it mean? - shabanip -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040925/dbcd8d80/attachment.htm

For a second I thought Active Reload was an exciting new Rails core framework. Just want to be the first to congratulate Rick and Justin on their new journey. A lot of us benefit from your code each and every day! http://activereload.net/2007/2/13/a-new-company-is-born http://digg.com/tech_news/Rails_Superstars_Rick_Olson_and_Justin_Palmer_Start_a_New_Company Sam

I want to buy a Lenovo U160 laptop, Core-i7, 16gb DDR3, 500gb HD What I am trying to accomplish is to use a Hypervisor that boots up and then have a Windows, Linus and OS X VM that also gets started up and I can interact between them while still on the same laptop. I have a fair number of reasons for wanting this between software development for all of these platforms to pen-testing, etc. Can

Hello all. I've been a fan of the xiph project for some time, thank you for your excellent work. I am looking for a fully-developed, beta, or alpha open-source hardware platform for remote deployment to terrestrial fm transmitters and streaming to general internet listeners. Willing to participate in development/beta testing of projects or possible $ support for an existing project. Able

Hi, just wanted to provide a upsc dump for an Eaton/Powerware 5115 rack mount unit. This was on a CentOS 7.3 machine with following packages installed: nut-client-2.7.2-3.el7.x86_64 nut-2.7.2-3.el7.x86_64 nut-cgi-2.7.2-3.el7.x86_64 $ upsc eaton5115 ambient.temperature: 43 ambient.temperature.high: 75 battery.charge: 100 battery.runtime: 24171 battery.voltage: 40.96 device.mfr: Eaton

I'm looking for anyone who has some vendors for rackmount PC hardware in a fairly decent configuration for Asterisk/Digium T1 termination. I am looking for well-built hardware from an integrator that understands correct component choice. Preferably, I'd like SCSI but I might be able to do Ultra-IDE platforms. I need at least two PCI slots in the chassis (so 2u/3u size factor is OK.)

Hi- I have an upcoming order for a bunch of asterisk boxes, and I'm considering using an "assembled" package for the server, instead of building them from components as I usually do. Does anyone have experience with the Dell PowerEdge 750 server, or any other 1U rackmount server for use with asterisk? Thanks in advance Scott Stingel Scott M. Stingel President, Emerging Voice

Rather off-topic, but I'm looking for IP-based KVMs (~16 ports) that can handle both PS/2 and USB hookups on the server side. All of the answers over at Slashdot are a few years out of date and it looks like prices on KVM head units have dropped a bit over the years. Some of the older units only worked with Windows, Internet Explorer and ActiveX. Others like the ATEN KH1516i supposedly

I am trying to install CentOS 3.4 on a Compaq Proliant 1600, and it hangs on probing monitor type when anaconda starts. I have tried running 'linux text' and manually installing drivers from the f2 options screen. Any ideas? Forgive me if this is an unbearably simple question, but I am new to linux. Mike

Yogunlugumuza gore mesajiniza en yakin zamanda cevap verilecektir. Sercan TAPSIN GSM: 05358583410 05542390959 05542390960 ICQ : 706886 MSN : sercantapsin at hotmail.com Yahoo : sercantapsin at yahoo.com Google : sercantapsin at gmail.com Mail : tapsin at hostunuz.com

Howdy all. We're experiencing some difficulties encountered from a new build/install world/kernel on a Compaq Proliant machine we have. We were running fine under 4.7-STABLE, and updated the sources to 4.8-STABLE last night (5/8/03), built and installed. This morning after a reboot, we got a horrid error to the likes of: Error mounting root. Error no 22. We encountered this error earlier

Hi, I''m trying to boot xen dom0 on a Compaq Proliant 2500 but so far I have been unsuccessful, I get (XEN) Not enough memory to stash the DOM0 kernel image. On a normal linux 2.6 kernel to boot I have pass "memmap=exactmap memmap=640K@0 memmap=319M@1M" to the kernel at boot otherwise it hangs because of the way Compaq Bios reports the system memory. I''ve tryed to use

After yum upgrade, the new CentOS5 kernel [ kernel-2.6.18-92.1.1.el5.i686 ] crashes each time early in boot process on Compaq ProLiant 3000 with dual Pentium3 CPU (600 MHz, CPU0: Intel Pentium III (Katmai) stepping 03, CPU1 the same). I get kernel panic at powernowk8_init+0x05e/0x1c3. The previous kernel [ kernel-2.6.18-53.1.21.el5.i686 ] seems to work fine. I am wondering if anyone has met

Hi everyone, My email server is running CentOS 3 and I can't upgrade it to CentOS 4 using the CD's. At first I thought it was the old Megaraid card (that's no longer supported), so I replaced that with a new card. I've tried ISO's from CentOS 4, 4.1 and now 4.2 which I've tested and booted in other machines. Just not this one. I've never had a problem like this

I notice from the hardware compatibility list that the XR model is supported - what are the chances that the older R3000h models are too? Thanks. /Per Jessen, Z?rich

Hi everyone. Has anyone experienced rsync 2.6.0 causing huge amounts of system load? Especially on Linux 2.4? We recently upgraded our "push" machine to rsync 2.6.0 and the next push that went out (rsyncing about 3GB of data to 15 servers sequentially over gigabit ethernet) caused the box to hit 110.59. We only know the load because snmpd was still working, but nothing else in userspace