similar to: dial out

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12

Hiya, here is a patch to fix that: [root@mailmx2 channels]# cvs diff chan_vpb.c Index: chan_vpb.c =================================================================== RCS file: /usr/cvsroot/asterisk/channels/chan_vpb.c,v retrieving revision 1.9 diff -r1.9 chan_vpb.c 100,102c100,102 < static VPB_TONE Dialtone = {440, 440, 440, 0, 0, 0, 5000, 0 }; < static VPB_TONE Busytone = {440,

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

Has anyone gotten the voicetronix boards to work with Asterisk, what would it take? Or does anyone know where I can get 4 ports or more fxs PCI cards that do work with asterisk? Brian J. Schrock Network Engineer, RHCE, CCNA Anistone Technologies Phone: 614-798-9106 FAX: 614-573-7165 6926 Avery Rd. Dublin, OH 43017

Hi. I need help with my brand new Voicetronix OpenLine4 board that I installed into Asterisk. After building the Linux device driver and inserting the module, I modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the US settings and comment out the Austrailian ones. I made the appropriate entries for routing in vpb.conf and extensions.conf.... All appears to be well, except

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Hi, Firstly it appears you are not passing the extension to be dialed to the Dial command, so the driver is dialing badly. It should be something like dial(vpb/1-2/102) since this is a line port. Admittedly the driver needs to check better that the number it is trying to dial is legit but it doesn't :) P. --- You Wrote --- From: "Jacky" <jacky.taiwan@msa.hinet.net>

Good day all How is asterisk version I'm having problems with 1.0.0 and 1.0.1 If I'm starting asterisk it give problems with the modules saying unresolved symbols Please give some input Thaks Altus

Hi there, I am trying to delay sending out DTMF from Voicetronix OpenLine4 to the CO line. The reason being is that Voicetronix sends out the DTMF too fast even before the line is fully established with the carrier. Usually when dialing an 8 digit number, only 7 digits are actually successfully heard by the carrier. Currently, my dial plan is: exten => _9.,1,Dial(vpb/1-1/${EXTEN:1}) Daniel

I have installed a 6VPCI card from voicetronix's but i can't get astersik to use it! Now looking at the loaded modules the chan_vpb is not loaded- so I assume that is why it is not working. Now I modified my vpb.conf file and extensions.conf, have I missed something Has anyone a installation guide as I am very new to this!! I have had asterisk working with SIP extensions. by dowloading

Is there anyone using * in AU that has successfully extracted the CLID from an incoming analogue PSTN phone call, and would like to spread the word? Note - I am only interested in analogue, not ISDN phones. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you

Does the voicetronix card work with Asterisk? -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of woody+asterisk@solutionsfirst.com.au Sent: Monday, February 02, 2004 11:06 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Pictures of new multiport FXO/FXS from digum > -----Original Message-----

hello this is the error chan_vpb.cc: In function \u2018void mkbrd(vpb_model_t, int)\u2019: chan_vpb.cc:1530: aviso: la dereferencia de punteros de tipo castigado romper las reglas de alias estricto chan_vpb.cc: In function \u2018ast_channel* vpb_new(vpb_pvt*, ast_channel_state, char*)\u2019: chan_vpb.cc:2671: aviso: comparacin entre expresiones enteras signed y unsigned g++ -c -o chan_vpb.o

Good day all I got my Music on hold to work but can I/how do i get music on transfer? Please help Thanks

When a caller hangs up (e.g. after leaving a voicemail), my British Telecom exchange sends a continuous tone for about 15s and then silence. I can't get asterisk to recognise this tone as a hangup indication. I have tried indications.conf with both country=uk and country=us. My zapata.conf has busydetect=yes, callprogress=yes and I've tried setting busycount from 1 through 7 I am using

Hi there, Besides the problem of Voicetronix dialing too early before the carrier gives a dial tone, there also appears to be issues with the audio quality when more than 1 channel is utilized.

Hi, Has anyone using chan_vpb noticed that only one splash of ringback is provided to the PSTN? I have tried several different permutations in extensions.conf and interworking to mgcp sip and iax. I am using the Voicetronix supplied chan_vpb and asterisk from the 1.0 cvs source tree. thanks darren -------------- next part -------------- An HTML attachment was scrubbed... URL:

Goo day all I'm going to put a asterisk server running sip in at a client.The server is going to have a public ip so that it can talk to another server. My question is how do I secure asterisk/sip. I got a firewall only allowing tcp/udp 5060? I got sip to work with md5 What more? Please Advice Thanks a million

Hi all ! Let's say you have about 6 small different companies sharing the same E1 / Asterisk server, and every company needs its own fax number. Since they don't really need fax machines, what would be the most cost-effective way to handle this (keeping fax-privacy at its best) ? Is there a way to configure Hylafax or sth & one modem behind an ATA-186 to email faxes to different

Hello, I have two sip phones (zoiper). Earlier these used to communicate using the settings below for sip.conf and extensions.conf and now we asterisk 1.8.29.0, so these phones have stopped communicating. My question is that does 1.8.29.0 release require any more changes to be done to the sip.conf and extensions.conf to make the below work ? The sip.conf contains following enteries