similar to: Can Asterisk provide Answer Supervision signalling to a channel b ank via T1?

In the 'me too' vein, I also have an untested 3624 here on the shelf and am waiting on a shipment of T100 cards to play with. Documentation is very hard to come by. Alcatel are certainly the owners of the Mainstreet product line but, without a support contract, any documentation they may have is essentially unavailable as their per-incident fees for support cost more than most of the

Hi I just came accross this Newbridge Mainstreet 3624 but the Alctel site appears to have zip for reference/user manuals Anyone by chance have 1 of these or a url for the docs ? thx

I have a situation where I am receiving DID calls using Immediate Start Pulse signalling on a Loop Start trunk. The line terminates on a Newbridge Mainstreet 3624 channel bank, which provides battery etc. The channel is converted and routed to Asterisk. The lines are configured as follows: /etc/asterisk/zapata.conf ; Channels 1-24 service MainStreet 3624 channel bank context=infrom-did group=1

To answer my own question for the record: The relevant timing parameters in zaptel.h are #define ZT_MINPULSETIME (15 * 8) /* 15 ms minimum */ #define ZT_MAXPULSETIME (100 * 8) /* 150 ms maximum default, lowered to 100ms */ #define ZT_PULSETIMEOUT ((ZT_MAXPULSETIME / 8) + 50) And the pulse detecion loop that consumes these parameters begins at line 4866 of zaptel.c The

I've got a Newbridge CB hanging on the wall not being used right now and I'd like to hear opinions on using it with Asterisk. If anyone has a manual for it I'd like to get a copy of it. I tried the googling approach but turned up nothing much except a Tech manual if I want to change out control boards. Thanks David Cox Director of Information Technology Ramtex, Inc.

Shoval, Interesting Mention. I agree, most people don't have CO exp. And I wish daily I had enough. Understand that what I mean by my e-mail is consumer side FXS ports, in broader terms, I mean, customer picks up a phone line, it signals a channel bank which signals *. 24 of those channels. Not channels equipped to Send Signal to the CO that a loop has been made.. meaning FXO. 24

Hi all, I have posted a copy of the 3624 manual on the web. It's 11MB and over 650 pages, so not exactly light reading! You can grab it at http://www.caeveo.com/files/newbridge3624.pdf. Please be kind and save it to your local machine instead of reading it from the web! Thanks! Sean -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type:

I am having a problem with Red Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different

Hello, I installed 4.8-RELEASE a few weeks ago, and since I let the effort sit stagnant for a while I decided to do the cvsup/buildworld/buildkernel/installkernel/installworld/mergemaster/MAKEDEV steps to get current. Went fine, rebooted, then noticed that just one CPU was recognized: FreeBSD 4.8-STABLE #0: Thu Jun 19 17:05:20 PDT 2003

Hi All I have problem with LIBMFCR2 for once Exchange I using Sangoma card, the firstly. my ssystem run successful with MFCR2, connected to E10 (Acatel Exchange), after that, i move connection connect to EWSD (Siemens), my system don't work. error protocol R2. my system: Asterisk CVS 1.1.X LibMFCR2 pre.005 and unicall-pre.005 this's my setting and my setting wanpipe1.conf

Simple question that google hasn't helped much with (likely poor search terms) I just installed a Sangoma A200 with overall good results. Initial tests with both incoming and outgoing calls were very positive. Until I made a normal call that lasted more than 30 seconds. I setup the FXO with kewlstart signalling, and the outgoing call is never registered as 'Answered' and the dial

Skipped content of type multipart/alternative-------------- next part -------------- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.8 - Release Date: 1/3/2005

Hi! I'm using FastAGI (agi://) to make some calls. To do the dialing i use "EXEC DIAL Zap/g1/XXXXXXXX...". But how can I make "answer supervision" with FastAGI? DIAL command won't return until call is finished. Thanks in advance! -- Daniel

Hi ! I've Linux Debian/testing, asterisk-1.2.13, zaptel 1.2.10 and Digium, Inc. Wildcard TDM2400P with 24 FXO ports. Our equipment is located in US. Lines and phone numbers from AT&T. How can I detect answers on these lines ? We've discovered that during answer voltage falls and after hangup - rises. During remote hangup there is kernel message from zaptel driver - NO BATTERY on

Hi. I am using Digium TDM2400PFXO with Asterisk1.6. When call sets in the box , it answers the call even the phone is not picked. ideally it should answer the call when the phone is picked up. Its charging the clients. Please let me know how can I cover this ? Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Is there any way of telling Asteirsk to withhold answer subversion on a call till I call Answer. My DP looks like this: [incoming] Exten => 18005551212,1,Noop() same => n,Answer same => n,Mset(__uid=${SIPCALLID}) same => n,MixMonitor(/tmp/FROM_CALLER_${uid}-${START}.WAV) same => n,Dial(Local/1 at dial_call_center/n&Local/2 at dial_call_center /n&Local/3 at

I have an Audiocodes MP-118FXO in production. When an outbound call is made and the remote party hangs up, the Audiocodes hangs up the call immediately. But if an incoming call is received and the remote party hangs up, the Audiocodes does not hang up immediately. I have tinkered with Current Disconnect and Polarity Reversal settings, to no avail. Anyone experienced this issue with Audiocodes or

Em (20:59:21), Asterisk Users Mailing List - Non-Commercial Discussion escreveu: >On Tue, Jun 21, 2005 at 08:09:52PM -0300, Alessandro wrote: >> >> Does Somebody know why no load modules to FXS? I used zaptel-1.0.7 >> version. > >What color are the modules? >Post your /etc/zaptel.conf > >-- >Mike Mike, The color is green, red ans bluw. Link

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf

zaptel compiles fine (make linux26) but when I modprobe ztdummy I get the follow error. [root@localhost zaptel]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy System info: Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44