similar to: Using Macro's that cause loops, on purpose and using h, exten in default twice

Hi! I am setting up a test bed for Samba PDC + LDAP. I used the 3.0alpha21 rpm for RH8 from samba.org. The setup is working. Win9x client can login no problem. I was wondering how I should setup an "Administrator" account for the domain. Right now, my plan is to have samba authenticate only to the ldap backend ("passdb backend = ldapsam" only). Does the administrator

Dear All I have a problem with a TDM400 card with 4 x FXS modules. The card carries extensions only and there are no incoming lines. I can make a call to the extension on this card with no problems. However, when I try and call out I just get a busy signal. I also get an error message (as shown at the bottom). Is this a problem? Configs below: [root at asterisk etc]# more zaptel.conf

Dear all. I have what appears to be a configuration error but I cannot for the life of me see what it is. (I am a newbie) I have searched the wikki and google etc but still none the wiser. Any help would be very gratefully received. Problem: Unable to make outgoing calls via E1 euroISDN Digium TE110p card, given congestion signal as per config, unable to open zap channel. All incoming calls work

I use the following macro for my extensions. It only works with Zap channels and assumes that any Caller*ID number that is 4 digits is an internal call and all other calls are external calls. Use like this: exten => 1234,1,Macro(std-exten,Zap/4,20) [macro-std-exten] ; ; Caller*ID is 4 digits (internal call) ; exten => s/_XXXX,1,Dial(${ARG1}r2,${ARG2}) exten =>

Hi, I have following one-line macro extension: ------------------------ [macro-oneline] ; ; Standard extension macro (with call forwarding): ; ${ARG1} - Device(s) to ring ; #exten => s,1,AGI(misterhouse.agi,"CallerID") exten => s,1,NoOp exten => s,2,DBget(temp=CFIM/${MACRO_EXTEN}) ; Get CFIM key, if not existing, goto 103 exten => s,3,Dial(Local/${temp}@default/n) ;

Greetings, I'm trying to continue to do some processing after a TIMEOUT (absolute). In my dialplan below, when a call comes in to [default], I call macro-phonenum and pass it a timeout of 20 seconds. macro- phonenum sets TIMEOUT(absolute), then loops saying the phone number that was called (in MACRO_EXTEN). When the timeout expires I want to call my macro-hangup (so it can say

Hei! I have a little problem with the subject. I use Asterisk CVS-HEAD-09/06/04-12:42:56 as a production *, but I do tests with a newer version Asterisk CVS-HEAD-11/18/04-10:01:32. Ok the problem is: in extension.conf I use macro for redirection, found on wiki pages: [macro-stdexten] ; ; Standard extension macro (with call forwarding): ; ${ARG1} - Extension(we could have used ${MACRO_EXTEN}

Copying to asterisk-users, as it's of use there too. I copied this code years ago from the net, it may have been modified since... This however is only used by managers, as it allows the manager to log a user in and out. For agent logged in/out status: where 8501 is the queue number and 8512 is the agent's extension, and SIP0001 is the agent's device. in extensions.conf

Does anyone know what application I should place this function in? For example with the DB function I currently do something like this to add an entry to the asterisk database: exten => s,n,Set(DB(AGENT/${MACRO_EXTEN:1})=${CALLERID(num)}) To delete the entries I do something like this: exten => s,n,DBDel(AGENT/${MACRO_EXTEN:1}) DBDel is marked as deprecated in favor of the DB_DELETE

hello, I have a test setup with 2 asterisk servers, each having a one snom 100 via sip using it. I`m experimenting on how trunking between them would work. I have them setup for RSA authentication which I plan to use in the future. So I`ve setup the keys and servers seem authenticate to each other. One is named phila and other hurricane. Here is what I see on phila: -- Registered

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091111/2b828eff/attachment.htm -------------- next part -------------- Hello. I am trying to execute an fax reception script and i am getting the following: [Nov 11 08:40:52] WARNING[12800]: app_system.c:88 system_exec_helper: Unable to execute '/var/lib/asterisk/scripts/mailfax ""

Same here, I just changed the b to u. Unavailable message is more generic, but it beats it saying busy when its not. -Tim -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Henry Devito Sent: Tuesday, October 05, 2004 8:31 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE:

Hi, I have attached configuration settings and cannot get ring signal when calling internal extensions. I'm probably doing something wrong so would kindly ask for a tip how to do it properly : exten => 11,1,Macro(oneline,SIP/11) Calling 11 (this is the same with BT or iax softphones) doesn't give me a ring - what is missing ? Thanks, Rob. [macro-oneline] ; ; Standard extension

Hello, When a user forwards his SIP phone to another extension (say an absent boss to his secretary) I'd like the unanswsered forwarded call to end up in the new destination's voicemail. With my current diaplan the call is handled by the original recipient's voicemail: [macro-stdexten] exten => a,1,VoicemailMain(${MACRO_EXTEN}) exten =>

Hello, all. I've solved my own problem but will post it here in case someone else has the same misunderstanding in the future. We thought we had set up our meetme so that regular users entered the conference without a pin but could not speak to each other until the moderator arrived. We enforced pin entry on the moderator . . . or at least so we thought. If the moderator waited long enough

I have this in my extension.conf: [incoming_28345474] ; 8862100 is the hotline number of the Welltech 3804 ; exten => 8862100,1,NoOp(${CALLERID(num)}) exten => 8862100,2,Wait(1) exten => 8862100,3,Set(CALLERID(num)=${CALLERID(num)}) include => fax2emailstart [fax2emailstart] exten => 3000,1,SetVar(CALLEDFAX=${EXTEN}) ; me exten => 3000,2,Answer exten =>

I don?t know if the last message was with content. So, I sent again. I have installed a Digium card TE210P and unicall for use MFC/R2. I think that it?s all right but I can?t make and receive calls. I?m using asterisk 2.1 with the patch made by Jos? P. Leit?o and the follow libs: libsupertone-0.0.2 libunicall-0.0.3 libmfcr2-0.0.3 zaptel 2.1 My number is 34318300. The Telco send me only 8300.

Hello all, Can this be done ? Would setting the variable FAXRESOLUTION to a appropriate value affect this change ? > http://www.asteriskguru.com/tutorials/rxfax.html Variables connected with the application LOCALSTATIONID - used by to application to identify itself to the remote end LOCALHEADERINFO - used to generate a header line on each page REMOTESTATIONID - set by the application, the

I think you will find the functionality you are looking for is in * already. Here is an excerpt from the sample extensions.conf file that is included with the source: exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten

I am integrating a new server (Asterisk 1.8.2.3, DAHDI 2.4.0) with VOIP only trunks, and this server only has soft phones. When I dial an extension and the phone is not registered, I don't get any ring or progress indications, and eventually the Dial() times out and drops into voicemail (as expected). CLI output: -- Executing [s at macro-StdExten:6] Dial("IAX2/barneveld-2036",