similar to: Phantom calls on FXO

Re-sent because had wrong subject line on first post, sorry. I have just installed * for a small office (P4 3Ghz, 1MB RAM, RH9). It's replacing an analog PBX, and for now, all incoming calls arrive on 10 FXO's. Outgoing calls are via Voicepulse. Phones are SIP, Cisco 7940G's. My problem is random disconnects on both incoming and outgoing calls. The phones are behind a firewall;

Hi, I'm am currently in the process of trying to integrate an * box with an NEC Electra Elite IPK. Currently, we have 7 POTS lines coming into our building. These lines are plugged into our NEC using the appropriate analog line interface card from NEC. The NEC effectively has NO configuration done to it, other than to make all the internal phones ring when a call comes in. We also

Hi people, question one i see that asterisk is now in 1.x release. having tried it in the past i want to know if i can use a voice modem as an outgoing line. i know in the past that was not possible/supported so im just asking in case the option is now available. question two im planing to use asterisk as a pure voip solution with sip phones and h323 phones no need for digium/dialogic hardware

I recently posted a message about an interesting dilemma which I could not figure out. After doing a whole lot more digging I think I have figured out part of what is going on. The parking app is implemented as an app, ie can be called from extensions.conf) but if you look really closely, it is also implemented in each channels driver (handler, whatever you want to call it) and those

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

Is there a way to ring selective line on multi-line phone. For example if I'm on the phone talking internally on line 1 and the calls comes-in the line 2 will automatically ring. The phone P104 allow extension to be assign each line. Is there a way to call certain line (example line 3) on multi-line phone instead of line 1 when the phone is not busy? For example the Sip phone P104 has

Hi, now I've got caller id working on my BT line in the UK, I'd like to play a different message to those pesky sort who with hold their outgoing number. How can I do this in my extensions.conf for my [incoming-analog] context? I realise some people may call who are unable to change the way that their system withholds the outbound number, so I'll give them chance to leave a voice

Sorry if this is the wrong list... I need a toll-free number to be delivered to me on IAX. (This is NOT an existing number need to buy the whole service.) Anyone know of a service provider offering this? -Mark 707-735-1038

If I have different opening hours on different days, can I accomodate that in a single gotoiftime, or will I need to filter them out one by one ? For example, our hours are Mon-Fri 9:00-17:00 and Sat 09:00-13:00 can this be done something like GotoIfTime([9:00-17:00|mon-fri][9:00-13:00|sat]|*|*?open,s,1) or something like that, or do I have to do:

I've been banging my head against a brick wall for the last hour and I'm sure this is one of those easy to solve things - just that I can't see the wood for the trees. I'm trying to do: ----------- [some-context] Exten => s,1,Macro(dodial,'SIP/201,15,tT',123456,MOHClass) [macro-dodial] Exten => s,1,SetCallerID(${ARG2}) Exten => s,2,SetMusicOnHold(${ARG3}) Exten

Hi there, I've seen people using SER with Asterisk. I took a look at SER website, and I didn't see the point in using it, since Asterisk already handles SIP very well (apparently, at least). But, as I'm starting, and some of you (more experienced) use it, I know that there's something there... So I would like to know why to use SER. Is it because of scalability, performance,

Hi, I'm trying to make a legend with a justified list of numbers, so I thought I would use phantom(0) to align the 3-digit numbers properly with the 4-digit ones: legend(x, y, xjust=1, yjust=1, lty=c(1,2,3,4,5), adj=c(0,0.5), legend=expression(phantom(0)*300*plain(K), phantom(0)*550*plain(K), phantom(0)*830*plain(K),

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

There's a phantom domain master browser showing up in my Samba nmbd.log file. I keep thinking that maybe it is left over in one of the files that I transferred over from the old server to the new server and it isn't clearing itself out. Is there a way to clear that and is it possible to have a phantom browser fighting over the Domain from a copied over file? I transferred all of the

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

About once a day I have noticed a phantom incoming call with a caller ID of asterisk@192.168..<cut off>. When I answer the call there is a dial tone and the call is disconnected. Any clues? David Koski david.nospham@kosmosisland.com

Hi all, I have a client that is having problems with phantom calls. I have not been able to see it happen myself, but they say when it happens, the display on the phone (polycom 301's) says "Device" is calling, but when they answer the phone, there is only silence and then they hang back up and it sometimes rings again. I've been trying to track this down for a couple of

I have a Samba 3.0.4 server configured as a PDC. NetBIOS name of the server is "SERVER"; name of the workgroup is "AEC". Problem is that there's now a phantom workgroup called "SERVER" when I try to browse the network. Since there's no clients configured in this workgroup, any attempts to browse this workgroup fail. When I attempt to use User Manager for

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Due to the varied responses that we received with the 'phantom jobs in the windows print queue listing' bug, I'm encouraging people to test 3.0.11pre2 and let me know if you still see the bug after ensuring that the $(lockdir)/printing/*tdb files have been removed. Thanks. cheers, jerry

I am running Ubuntu 11.04 with wine 1.3.20. I am trying to install the Phantom Menace. The menu pops up to install, and takes me to the setup. When the setup loads, an error pops up: Severe: get prof failed! The setup continues like normal, but then when actually installing the files, another error pops up: Severe: file set execute failed. The progress bar jumps straight to 100%, then about 8