similar to: FAXMAIL

Hi, I have one Q: why doesn't work h-extension in macro? I want to setup fax macro, to send tif-file after fax channel hang-up, but h-extension doesn't work in macro, so I must put them to global context. But in this setup, exten => h,1,system(/var/lib/asterisk/bin/mailfax ${FAXFILE} ${EMAILADDR} "${CALLERIDNUM} ${CALLERIDNAME}") mailfax binary will be executed after any

Hello, Can I use the Diva Server PRI/E1-30 card with asterisk (with chan_capi or i4linux) ? If asterisk detect a fax, how divert the call to the onboard DSP ? How can I handle the fax with hylafax (capi or pseudo serial device ?) Thank you, -- Carl

I'm experiencing a very unusual problem with a few of my sipuras. They keep over heating after minimal usage. I unplug them and let them sit for 15 minutes and it starts working fine. The other way around is that I put a fan on it or something to keep it cooling. Has anyone else experienced this or are they just defective units? Regards, Mohammed Salim EZZI Telecom, Inc.

A few weeks ago, I lost my Trixbox that was all set up with Hylafax and IAXmodem. I am trying to set it up for email > procmail > faxmail > iaxmodem > asterisk >sipext > ATA (with attached fax). I have followed all the instructions on creating the IAX extension and configuring the IAXmodem config file. I can see the connection in Asterisk: iax2 show peers Name/Username

i cannot see caller ID of the call originated from outside zap channel. i hv configured both zapata.conf and extensions.conf. i m right now in india i think asterisk only supports Bellcore enable caller ID. so is it the same bug of BT caller ID problem in UK? or it is the bug of my asterisk configuration? i hv enabled callerID from my TELCO. -------------- next part -------------- An HTML

I have a sendmail question. Can someone point me to a list appropriate to get some sendmail.mc help?

OK. Digging into this... sendmail.m4 has the lines: define(`FAX_MAILER_PATH',`/usr/bin/faxmail')dnl define(`FAX_MAILER_ARGS',`faxmail -d -n -p 12pt $u@$h $f')dnl MAILER(`fax')dnl proto.m4 has: `R$+ < @ $+ .FAX. > $#fax $@ $2 $: $1 user at host.FAX', `ifdef(`FAX_RELAY', `R$*<@$+.FAX.>$* $:

Hi all, I have 'Voipac NetPhone 210' phone apparatus with

Hi all is there any way how can I simulate PSTN tone on asterisk. I

Hi all, I have one asterisk server with one ISDN BRI connection to PSTN, with h.323 support (oh323) I buy some voip phones, and I connect them to the same switch as asterisk server is; all is at the same TCP network. I need to route some extensions from my DDI (DID) line at asterisk to some voip phones, and also to do: outgoing calls from any voip phone to PSTN via asterisk, and intermediate

I have spandsp, rxfax and asterisk-1.4.2 installed and whenever a fax call comes in we get this. This isn't good. Any ideas? [New Thread -1215390800 (LWP 8504)] -- Accepting call from 'DELETED' to '539' on channel 0/1, span 1 -- Executing [539@telco-incoming:1] Set("Zap/1-1", "DIALEDNUM=539") in new stack -- Executing [539@telco-incoming:2]

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * again. This all worked out fine. When integrating the RxFax into my dialplan the

On 11/22/05, Sharon Kimble <sharon04 at gmail.com> wrote: > Does anybody know the gnome program that you can write in latex with please? > > I'm not sure but I think its in the base repo. Its not winefish as it > (winefish) doesn't compile the source text like the program that I'm looking > > for does. > > Hopefully thanks > Sharon. > -- I am

Does anybody know the gnome program that you can write in latex with please? I'm not sure but I think its in the base repo. Its not winefish as it (winefish) doesn't compile the source text like the program that I'm looking for does. Hopefully thanks Sharon. -- 16:41:46 up 1 day, 16:56, 2 users, load average: 1.54, 1.45, 1.51 A taste of linux

In Australia, Telstra, the local telco provides isdn modem for isdn connection. The modem has 2 analogue telephone jacks and a serial port for connection to dialup internet. My question is that will it be possible to use Zaptel TDM02B to connect to the analogue jack instead of getting a fritz card to do the telephony. Will there be less feature if doing so? -- David Kwok, CISSP Tel: 612

Hi, I'm after some ISDN card resellers in Australia. I've noticed the AVM cards should work well here, however I've found the reseller here has no website, is listed in Yellow pages as management consultants (??) and when I called quoted almost $400. Does anyone know where I can get the AVMs in Australia a bit cheaper or another card (not the Netjet) that works with Asterisk.

Hi anybody, I did setup fax/voice switch according http://www.voip-info.org/tiki-index.php?page=Asterisk%20fax somthing like: [macro-faxvoiceswitch] exten => s,1,Answer exten => s,2,Macro(oneman) exten => s,3,Hangup exten => fax,1,Macro(faxmail) where: [macro-oneman] exten => s,1,SetVar(klapka=${MACRO_EXTEN:-2:2}) exten => s,2,SetVar(voicemail=${PFX_ISDN1}${klapka}) exten

Hello: I have been using the asterisk system now for almost 5 months. I'm very happy with it's performance, however I have been using the RXFAX on and off for the last month or so. I gave up after a while and just had it route to my analog fax machine in the fax context. However, I have always had the implementation that it would go to a macro.. macro-faxreceive, and to the rxfax of the

Thanks for these informations I would have prefer to receive them from asterisk-users instead of serusers !! May be they are sleeping . Ok i have not installed spandsp because of i don't find some scripts like in hylafax for mail2fax fax2mail i've just patched chan_sip.c Regards Harry --- Alexandr Dubovikov <shurik@start4.info> a ?crit : > On Wed, Apr 26, 2006 at 11:27:01AM

Congratulations to the CentOS folding at home team for breaking through the rank 400 barrier. The next target is the rank 250 :) More information about the team can be found at http://www.sharons.org.uk/cf.html, and we welcome new members and their machines. We always need more members and more machines too :) Sharon. -- 18:47:57 up 8 days, 20:56, 2 users, load average: 1.30, 1.76, 1.61 A