similar to: Avaya 4624 phones

HI, I have the latest RC2 of Asterisk on a RH 9 non-modified-load box. I have an Avaya IP phone that uses h323, so I am trying to compile h323 into Asterisk. Now, I downloaded pwlib and openh323 tar files and I have compiled this according to the instructions: pwlib: ./configure make opt openh323: ./configure make opt cd asterisk/channels/h323 make cd asterisk make clean make install I am

I have added H.323 support for ASTERISK PBX using the OpenH323 library. I thought that since the Avaya IP phones are H.323 phones I will be able to make them register to Asterisk server. Does anyone know if this is possible ? Katerina

Hi guys, I installed asterisk and it's working really well. For now I`m using soft phones IAX and SIP but now I want to use the regular IP phone, what I have now is Avaya 4624 and I didn't find a firmware for SIP for this particular phone I believe now is working with H.323, can please someone advice me if exist firmware for this phone to register SIP or IAX2 with my asterisk box, and to

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

I have an Avaya 4602 IP phone that was previously working with Asterisk. It was being used elsewhere for several months, and I recently set it up again to work with Asterisk. Everything works fine for several minutes -- I am able to receive and make calls as expected. However, after a few minutes, and every few minutes thereafter, I get the following message on the console: -- Got SIP

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

Stephan, Ok, I'll re-state the problem... I have two devices that I want to talk to each other: 1. an Asterisk PBX 2. a Damm Cellular TETRAFLEX digital radio system (www.damm.dk) both devices are effectively "gateways" because they have many subscribers behind them. The Damm Cellular system controller is based on Windows-XP Embedded and its sub-systems used the OpenH323

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

Dear Mailinglist-User currently we`re working with an IP-PBX, based on Asterisk, with SIP, H.323 and ISDN-Capabilities. SIP and ISDN works fine, but H.323 not. In our first test, we started to connect Asterisk to an Cisco IOS-Gatekeeper with the "chan_oh323" (version 0.6.5). We successfully tested in/egress calls without any problems. But when we started to connect our Asterisk

Hi, I am trying to use an Avaya 4602 phone, which I just updated from a very old SIP software to the latest I could find on avaya's site (032207). The upgrade went fine and it gets registered on the Asterisk server. Now, a couple of glitches, though. - The phone's web server is not working ... so I have no easy way to configure it. It used to work with the old release of the software. I

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

I have a connection of Asterisk with Avaya by H.323 and so far everything worked well because only sent to Avaya. Now, the matter is that from Avaya will send me an IVR calls to capture credit card information, the link is active on Avaya 23 channels which is not how to configure Asterisk for those 23 simultaneous channels of Avaya's collect asterisk. Do not know if I can be with a group or

All, I'm haveing a bit of trouble getting my head around H.323 and call routing with Gatekeepers, Zones and intra-zone calls - hopefully someone who is more informed in things H.323 will be able to point me in the right direction...? I already have a mature network of Asterisk boxes dotted around the UK and overseas with hundreds of extensions and our own number-plan/dial-plan in the form

Actually I am facing a problem with H.323 (the standard and the ooh323) with Asterisk vesion 1.4.25 and I discover the following: 1) Using the standard h323 that come with Asterisk: The chan_h323.so it is not existed in the /usr/lib/asterisk/modules after doing the compilation and installation for (pwlib, openh323, /chanels/h323, asterisk), although make menuselect was done and the h323 channel

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Hi group! Does DTMF inband work with oh323 channel driver ver. 0.6.7? If yes, how to enable it, make it work? I have tried with "inBandDTMF=yes" in general context of oh323.conf, but I get this message when I * is starting. [chan_oh323.so] => (InAccess Networks OpenH323 Channel Driver) == Parsing '/etc/asterisk/rtp.conf': Found == Parsing

Hello, I've been trying to send traffic to a Cisco Call Manager 3.2, but with no luck. Here's whats happening: * Call gets to CCM * Call gets to the gateway * Rings a couple times on destiny * Call gets hungup. On the CCM I get the following error: MediaManager - ERROR wait_AuConnectErrorInd On the Gw (Cisco AS5300) I get a disconnect cause of 2F (Resource not available) On asterisk:

Hello All Anybody had used ooH323 for asterisk i using ooH323-0.7.2 and asterisk CVS may 2005. OpenH323 1.17.1 and pwlib 1.9.0 and GNUGK 2.0.2 audio is very good, better than SIP and IAX, but i have problem. how to router call from openh323 to outside PSTN. my h323.conf setting ; Objective System's H323 Configuration example for tvcti ; ooh323c driver configuration ; ; [general]

Hi, ALL: I install my oh323 channel driver following steps of http://www.oinko.net/astrecipes/index.php?action=artikel&cat=270174&id=10&artlang=en I works my asterisk well before install the chan_oh323.so. But after I do "make install" the oh_323, my asterisk crash and show me the following message (asterisk -vvvvvvc). Does anyone have any idea about it? What's wrong