similar to: frozen centos 3 server

hello list! I am attempting to setup haproxy using a shared up I am trying to setup using the heartbeat package that I currently have installed: [root at VIRTCENT01:~]#rpm -qa | grep heartbeat | grep -v -e stonith -e pils heartbeat-2.1.4-11.el5 heartbeat-2.1.4-11.el5 I have /etc/ha/.d authkeys setup this way: # auth 2 #1 crc 2 sha1 {SHA}secret I have /etc/ha.d/resources setup like this:

I'm not a master of the internet RFCs, but I do believe icmp messages have different types. Now to enable traceroute for IPFW, I might put in a rule like this: ipfw add pass icmp from any to me However, how would I make a rule to limit icmp messages to just those used by traceroute? Can the messages be distinguished as such? A dynamic rule that exists only for the duration of a traceroute

Hi, when I run a nmap localhost I see that port 199 is open for the smux service but when I check the services gui in runlevel 3 or 5 I don't find it. It's also not in /etc/init.d/ At the moment almost everything is inactive except for some well known services like httpd crond etc. but mux is still there. Does anyone know how to colse this service? regards, ivago -------------- next

Hi, I'm new to libvirt so please bear with me. I am trying to set up a routed subnet on my laptop with libvirt, hoping it to be able to communicate with all servers in my nw. My laptop is on a subnet, 192.168.2.0/24, with a static ip, 192.168.2.27. I have "more or less" followed this guide for routed networks,

I have two CentOS servers running SSH on two different non-standard ports. So far as I can tell, they have identical /etc/ssh/sshd_config files with the exception of the different port (both are 22xx). However, when running nmap on them, one betrays the port that SSH is running on, and the other does not. I have shut down iptables on both machines and the behaviour remains this way. What could be

The CentOS Development team is pleased to announce the availability of the CentOS 5 i386 Live CD. This CD is based on our CentOS-5.0 i386 distribution. It can be used as a Workstation, with the following software: OpenOffice.org 2.0.4 Firefox 1.5.0.10 Thunderbird 1.5.0.10 Gaim-2.0.0 Scribus-1.3.3 xchat-2.6.6 k3b-0.12.17 Gimp-2.2.13 It can also be used as a rescue CD with the following tools:

The CentOS Development team is pleased to announce the availability of the CentOS 5 i386 Live CD. This CD is based on our CentOS-5.0 i386 distribution. It can be used as a Workstation, with the following software: OpenOffice.org 2.0.4 Firefox 1.5.0.10 Thunderbird 1.5.0.10 Gaim-2.0.0 Scribus-1.3.3 xchat-2.6.6 k3b-0.12.17 Gimp-2.2.13 It can also be used as a rescue CD with the following tools:

Ok, I''ve completely reinstalled Xen and I am still encountering the most curious problem. I set up a virtual network of eight domains: three are on a virtual DMZ network (10.0.1.0/24), four are on a virtual internal network (10.0.2.0/24), and a router connects the two. All the domains can ping each other and traceroute-ing between them shows the proper network structure (first hop:

Am 12.08.2015 um 15:16 schrieb Dr J Austin: > Hi Richard > > I have been working at trying to get cyrus to listen on 148.197.29.5 > interface instead of the localhost - I have failed > > Whenever I add things to /etc/cyrus.conf such as > imaps cmd="imapd -s" listen="[148.197.29.5]:imaps" prefork=1 No square brackets around the ip address. >

Hi guys, I'm running Asterisk-0.5.0 and accidentally stumbled on this problem while in the VoicemailMain2 application: If you login to it, or even if you call it w/ 's<extension>' to skip the login and press an '8' near the beginning (and possibly at any point, I'm not sure), the channel seems to lockup, even if the handset is hungup, the channel remains frozen

On Wed, 12 Aug 2015, Alexander Dalloz wrote: >> I have been working at trying to get cyrus to listen on 148.197.29.5 >> interface instead of the localhost - I have failed >> > No square brackets around the ip address. imap cmd="imapd" listen="imap" prefork=5 # imaps cmd="imapd -s" listen="imaps" prefork=1 imaps

Hello everybody. Recently i moved external interface to zone "external" on my home server/router. And something strange is hapening. From my router (chamber, CentOS7) everything is fine: [root at chamber ~]# firewall-cmd --list-all home (default, active) interfaces: enp3s0 tun0 virbr0 sources: services: dhcp dhcpv6-client dns http https imaps ipp-client mdns nfs samba

Hi all I want to reuse command in the shell historys Which command I can only select "traceroute 192.168.0.5" to run? $ history |grep traceroute 26 traceroute 192.168.0.5 27 traceroute -n 192.168.0.5 28 traceroute 192.168.0.10 29 traceroute yahoo.com 46 traceroute 192.168.0.33 eg: history |grep traceroute | awk '{ print$2 " " print$3}' | grep

Has anyone else had this problem? I have tried other mirrors and still to the same effect. Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Downloading header for nmap to pack into transaction set. nmap-4.01-1.2.el4.rf.i386 100% |=========================| 5.3 kB 00:00 ---> Package nmap.i386 2:4.01-1.2.el4.rf set to be updated -->

Hey Y'all, I just set up a new old machine on my network. I did a net install of CentOS 6.7 on it replacing an outdated copy of Win XP. Of course I'm now in the throws of configuring the machine to be a useful member of society. [mlapier at peach ~]$ nmap -sn 192.168.15.0/24 Starting Nmap 5.51 ( http://nmap.org ) at 2015-08-23 20:12 EDT Nmap scan report for 192.168.15.1 Host is up

Hi: I have a machine with four interfaces connecting four different networks. I am learning to use nmap and trying to force the nmap working only one interface. As nmap man page states, I use -e option and it would not work: nmap -e fx0 -v -sP 192.168.128.0/23 Starting Nmap 3.95 ( http://www.insecure.org/nmap/ ) at 2006-02-04 14:04 CST getinterfaces: Failed to open ethernet interface (el0)

Hi Thomas, Could you tell how can I change the protocol of corresponding port means 5060 is configured with tcp protocol I want to configured with udp. When I execute nmap -p5060 xx.xx.xx.xx I got below output [root at ip-172-31-32-117 cel]# nmap -p5060 xx.xx.xx.xx Starting Nmap 5.51 ( http://nmap.org ) at 2015-04-21 11:19 UTC Nmap scan report for

> > It's listening on both IPv6 and IPv4. Specifically, why is that a problem? The central problem seems to be that the monitoring host can't hit nrpe on port 5666 UDP. [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H puppet.mydomain.com CHECK_NRPE: Socket timeout after 10 seconds. It is listening on the puppet host on port 5666 [root at puppet:~] #lsof -i :5666

All, I've put a new asterisk server at another location and can't seem to get it working. What's the best strategy to debug connections? I'm doing inbound SIP only and have installed the server in the same way as I did on my DEV server. Running an nmap on localhost shows the port listening: ---------- [asterisk]/> nmap -sU localhost Starting Nmap 4.11 (

Hello, I am trying to setup a samba server as a pdc bound to eth1 only (testing network). however I still seeing samba bind to eth0. I am running a debian unstable box... any ideas? do you need anything more to go on? (see attachments) I am starting smbd and nmbd up using a startup script out of /etc/init.d with the options: --exec /usr/sbin/nmbd -- -s /etc/samba/smb.ts.conf -D; --exec