similar to: Configuring X Ten to make call using FX0

Folks, I'm trying to get Asterisk to load my voicemail configuration from MySQL. I've followed the instructions at: http://www.voip-info.org/wiki-Asterisk+voicemail+database I restarted Asterisk, but no luck: the voicemail.conf does not get updated. I started with a sample voicemail.conf that I found on the Wiki. Or was it from Voicepulse? I can't remember. For initial testing, I

Thank you very much. For some reason "emailsubject" was not included in my example config. Well, it's working great now. Last question, I promise :P. Is it possible to change the date format? I want it in Norwegian. -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Barry Flanagan Sendt: 22.

I'm having tons of trouble getting the fromstring to work in voicemail.conf. I've tried both voicemail and voicemail2 but the emails still seem to be coming from asterisk pbx. Has anyone had any luck with this? ================= Here's my voicemail.conf: ; ; Voicemail Configuration ; [general] ; Default formats for writing Voicemail ;format=g723sf|wav49|wav format=wav49|gsm|wav ;

Don't be afraid about the info that I'm going to post in this mail, but I want you to give as much info as possible. Also I want to show you what I've tried. What do I want When a voicemail-message is left via the Voicemail()-application, I want the .wav-file send to my mail-address as an attachment. My mail-setup I'm not using sendmail as MTA. I have msmtp as MTA and mutt as

Dear group, Was wondering if anyone out there has had the experience I have been having. In reading recent posts on echo cancellation, I think there is.... We recently cut over the Asterisk and are configured with 5 FXS and 2 FXO ports to the PSTN via 2 TDM400P's and 5 SIP phones on our local network. I have set up echo cancellation with 800ms echo training. I do not have

Hi I have a problem w/ voicemail, the subject message is corruption when used voicemail variables, e.g. : voicemail.conf emailsubject=${VM_MAILBOX}|${VM_MSGNUM}|${VM_CALLERID}|${VM_DUR} Return: Subject: =?utf-8?Q?1504|12|=22Teste_-_Rafael=22_=3C1570=3E|0=3A16?= Expected: Subject: 1504|12|"Teste - Rafael" <1570>|16 Thank's Att, *Rafael dos Santos Saraiva* Tel: (51)

If you set "dialout=fromvm" in your voicemail.conf, how do you then go about being able to dial back out? Is there a service feature code?

I current have a working Asterisk 1.2.12 server with ODBC voicemail storage, realtime static maps for voicemail, sip and iax configuration files. Realtime extensions, etc. All works great. I have verified that this configuration works on my test server as well. Now I am trying to test the 1.4B3 version on the same test server, and all works well except for ODBC voicemail. I am using the same

Hi, I have some issue with voice mail with ODBC on asterisk 11.7 box. I may not understand database functionality on asterisk fully. The most suspected area is func_odbc. I already googled but not luck. Your guide is warmly welcomed *Error messages when I make call and leave message.* -- <SIP/1ffa9-00000007> Playing 'auth-thankyou.g722' (language 'en') [2014-05-28

Here's a possible bug, or more likely, I'm just missing something. We have a pots card in one of our asterisk boxes. Its a simple asterisk setup with one FXO/FXS card and basic static extensions file, etc. When we dial out over the pots line, 4 out of 5 times, it will work. However, every 4 or 5 times, we get an error back from the provider that says "The number you have dialed.....

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

Hi, For some reason, I seem to have issues with dailing toll free numbers and can't seem to find out why, sometimes, I get a busy signal. Some other times I get weird errors from the phone. The error below was a simple busy signal. Here's couple of my info relevant to the problem: -- Reconfigured channel 1, PRI Signalling signalling -- Reconfigured channel 2, PRI Signalling

Does anyone kmow what these errors mean or how they can be fixed. I'm using asterisk on a Fedora Core 2 box with a TDM400P with 2 fxo and 2 fxs ports. Dec 29 17:17:52 WARNING[6019]: chan_zap.c:5469 ss_thread: Channel Zap/4-1 in prering state, but I have nothing to do. Terminating simple switch, should be restarted by the actual ring. -- Hungup 'Zap/4-1' == Starting post

I am having dial out issues and was hoping someone could shed some light. The problem is Intermittent: extensions.conf [globals] ; Trunk Info for outbound calls via PSTN - See the zapata.conf file in /etc/asterisk TRUNK=ZAP/G1 ;Trunk Interface ;MSD digits to strip (usually 1 or 0), 1 = remove a leading 9 TRUNKMSD=1 ; -------------------------------------------------- ; [trunklocal] - Defines

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

I am using version: CVS-v1-0-12/13/04-18:46:23 with a TDM400p (2 fxo, 2 fxs ports) and I keep getting errors along with phantom calls: Dec 21 16:02:07 NOTICE[5872]: chan_zap.c:5363 ss_thread: Got event 17 (Polarity Reversal)... Dec 21 16:02:14 WARNING[5872]: chan_zap.c:5434 ss_thread: CallerID returned with error on channel 'Zap/4-1' my analog phone reads caller ID info fine when

Apologies if this is a repeat: I trawled through the archives and couldn't find a reasonable answer, so I'm asking here. I have an Asterisk install connecting from behind a NAT device (DSL modem) to a SIP proxy (in my case, Broadvoice). I have an sjphone softphone on a Windows PC also behind the NAT device that connects to the Asterisk install, and using this setup I've been pretty

Don't know enough to properly term the problem I'm seeing... sorry if subject appears vague. And I have other questions too, but "Newbie Help Wanted" isn't exactly more specific... ;-) My setup, intended for testing and all, "*" version 1.6.0.6, dahdi with an X100p clone. Regular phone line provides PSTN access with one port (and my DSL). Calls come in and are

A call comes in from the PSTN, Asterisk answers it, it goes to the directory, and then to the extension the caller designates and the user at that extension answers. The user at the extension then wants to transfer the call to another extension; on the Cisco 7940 they push the ?more? soft key, then the ?Transfer? soft key, then enter the extension number they want to transfer to, and hit the