similar to: Budgetone problem

I have two problems with Asterisk and my Budgetone 100s. 1. Sometimes when outside callers dial my Budgetone it will ring twice, then the caller will receive a busy signal. This happens intermittently and I cannot pin down the circumstances of when it works and when it doesn't. Asterisk logging doesn't give me too much info when this happens: *CLI> -- Executing

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Hi All I have 3 GrandStream BudgeTone-100's which connect to an * box with a HFC-S based ISDN card using ISDN4Linux. I have setup the BudgeTone-100's to use Early Dial which for calling between the three phones works well, but for the external calls using the following extension exten => _9.,1,Dial(Modem/g1:${EXTEN:1}) Only the first digit is dial on the ISDN Line. Does anyone know of

I have the MusicOnHold feature working great when called from ATA-186 extensions. It's pretty cool. However, when I call from a BudgeTone-100 phone, no music is heard -- instead it continues the ringing feedback and acts like the call is unanswered. At the same time, I can call from (multiple) ATA-186 extensions and hear music as long as I like. How can I debug this? As far as I can tell,

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

I'm using 1 BudgeTone 100 IP Phone and a Sipura 2000 for all my old analog phones. The analog phones with the Sipura seem to work great. Voice quality is fine on both ends on the Sipura. I'm using the Teliax service and I use the Ulaw codec for all phones. However, I'm struggling with the BudgeTone 100. On my end, I find there is lot's of voice cut outs. I'm told my

Just for the record and to possibly help with others who get BudgeTone phones. My asterisk box is behind NAT, and I use Vonage, NuFone, and iconnecthere for my "POTS backhaul." On the front end I have an ATA186, a Digium TDM20, and now a BudgeTone 102. The BudgeTone definitely has issues wrt the RTP stream and NATting, although unfortunately I haven't yet been able to dig

Hi, I'm considering giving the Grandstream BudgeTone-102 phones a try. I've been using Cisco 7960's to date, but the low cost of the Grandstream phones are hard to ignore. I have two questions: 1) Does the message waiting indicator on the BudgeTone's work with Asterisk? 2) The one line 12-digit LDC concerns me a bit. Is the LCD able to display both the CID number and name on

I have a couple of Budgetones that I am playing with trying to get them to work with * from a remote network over the Internet (yes NAT joy!). My * server is in my DMZ and I have 5060 and my RTP range forwarded (UDP) to my public address (through a Cisco PIX). Internally, I can setup my budgetone, it registers and works great. I then have a Linksys router connected to another Internet

asterisk-users-request@lists.digium.com is believed to have said: >Budgetone and MWI > >The message button can be programmed to dial an extension that checks >voicemail >exten => 160,1,Voicemailmain(${CALLERIDNUM}) > Thanks, this is what I was thinking about. Still, how do you get the BT to dial 160? In my Asterisk setting I have the same mailbox numbers reused for the

Hi, Just playing with a couple of Budgetone 102 phones and they are pretty good for the price. The only problem i'm having at the moment is when I get a voicemail on the Asterisk box the LCD flashes. Dialing *98 goes to the VoiceMail Manager, and asks for mailbox, I enter 201, then asks for password, enter my voicemail password set in the Extensions -> webadmin, then hit the

I noticed that the BudgeTone (I have the 102) with the latest firmware tries to download a file called cfg.txt (presumably the configuration) and a file called ring.bin (presumably a ringer) from the tftp server. The ring-in sound on the budgetone is the same as the ring-out sound and that is going to be confusing for users. I contacted GrandStream and was informed that both of these formats are

After reading about these $75 SIP phones on this list, I purchased a couple for evaluation. They do work with asterisk - and are good value for money, but as somebody commented: they are not yet perfect. I just wondered if anybody had managed to get either the message-waiting indicator or the conference button to work? Phil Skuse <phil.skuse@vicorp.com>

Hi again. I cant get my Budgetone registered in Asterisk, and I cant find what's wrong... uff. This is my config: This fragment is from my sip.conf: [12345] type=user user=12345 username=12345 secret=12345 authuser=12345 qualify=1000 nat=no host=dynamic dtmfmode=rfc2833 reinvite=no canreinvite=no disallow=all allow=g729 allow=ulaw allow=alaw context=sip_default And this is from my

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

Everytime that I make a call to a Budgetone 101 phone. I always see the following: -- Executing Dial("SIP/1001-bac5", "SIP/1000|20|tT") in new stack -- Called 1000 -- Got SIP response 302 "Moved Temporarily" back from 172.22.5.4 -- SIP/1000-465e is busy I can use X-Lite all the time to make a call without a problem, but any of the budgetone 101 phones

Symptom: Phone after about 15mins will stop functioning Problem: DHCP lease renewed but default route dropped Fix: Assign a static ip and problem is resolved. Upgrade to new firmware once it is released It turn's out that these phones have a few issue in 1.0.3.81 firmware. The phone may stop transmitting packets if configured with DHCP, if DHCP is being provided by certain devices. Netopia

Hi Folks, Since there isn't a grandstream forum AFAIK I guess someone here may be able to shed some light on this. Apologies if this is viewed as offtopic.. I think I may have killed the firmware on my Grandstream Budgetone 101. I found a source for the 1.0.5.30 firmware and made the files available over tftp. The phone downloaded the files but now doesn't boot and hangs with a blank

I'm using Asterisk on a open server (no firewall or NAT) and trying to communicate with a Grandstream BudgeTone 102 SIP phone which is behind NAT. The BudgeTone is at firmware level 1.0.4.30 and Asterisk is from CVS about a week ago. My problem is that I'm only getting half-duplex communication -- I can hear voice from the Asterisk server but the server does not understand any voice from

I have a problem with using voicemail on the Budgetone phones. When entering the mailbox and password, sometimes some keys will register multiple times (as shown on console when it says no such user in config file) and sometimes some keys won't even register at all. It seems totally random. Has anyone seen this problem? Any recommendations would be greatly appreciated. Thanks. Brian