similar to: chan_capi install problem

I'm getting this message when I start Asterisk chan_capi.c:2205 capi_handle_msg: Command.Subcommand = 0x5.0x81 but when I try and recompile I get this chan_capi.c:60: error: `__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__' undeclared here (not in a function) any help would be greatly appreciated. -- Dave Cotton <dcotton@linuxautrement.com>

I really can't understand what is happening. I have the same set up in two locations:- 2 fritz cards in each with the patches and the same capi.conf except for the MSNs. One installation calls in on controller 1 and starts calls out on controller 2, i.e. perfect. The other calls come in on both controllers at the same time. I have checked the patches etc. Is this possibly a problem caused

Hello, I am altering an asterisk configuration and would like to eliminate the loading of modules I do not want or do not need at the moment. For example I am do not want to use chan_zap (I'm using chan_capi) and don't want to be bothered with music on hold at the moment. Is there a way to configure these things off so asterisk doesn't try to load them? Or do I have to just

Hello, Has anybody installed 2 Fritz pci cards in an asterisk box ? I can't make them work : each card is working fine when installed alone (with chan_capi), but I get a kernel freeze when doing 'insmod' with both cards installed. I am using Mandrake 10.1 with kernel 2.6, so the hack described at http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used (the hack requires

Just done a clean install of rc5 on a totally new machine and found the following:- /etc/init.d/asterisk start errors on line 109 - there is no 0 before $VERBOSITY as in the other lines. More interesting is that after make samples I have no iax2 available. Dave Cotton

Hello all. Has anyone managed to get SIPCALL.co.uk's service working with the [*] box? I've managed to register with other SIP providers but not SIPcall. The debug just show's [*] attempting to register. But receiving a 401 error everytime. Cheers Matt

Using CVS update from 11:00 CET today * crashes at this point. == Parsing '/var/spool/asterisk/voicemail/default/2201/INBOX/msg0000.txt': == Parsing '/var/spool/asterisk/voicemail/default/2201/INBOX/msg0000.txt': Found Sheriff*CLI> Disconnected from Asterisk server -- Dave Cotton <dcotton@linuxautrement.com>

Hi, I used to have a Grandstream phone connected to Asterisk a few months ago. Worked just great! Then today I do a new install, rather than an upgrade, and all of a sudden I cannot check voicemail with it. No problem calling or receiving call. It simply speeds through the vm greetings but I cannot hear them. If I check the same VM with an analog phone it works fine. So I wanted to check

I did cvs update on asterisk, zaptel, libpri as of today (November 5, 2003). I also did 'make clean' on each of them. My previous version of asterisk was cvs of September 15, 2003. No other changes have been made to my system other that these updates. when running 'make asterisk' the following error appears term.c:55: conflicting types for `term_color'

How to change available options (behaving) during listening of voice mail? (They are unnecessarily complicated) For example, I don't want to press 3 (advanced options) and again 3 for envelope. I just want to play envelope. Also, when saving message, I do not want to choose folder, I want that message as default be saved in old messages. And, I don't want to press 6 for next message, I do

Dunno if anyone else has seen this yet: http://www.scmagazine.com/us/news/article/563800/vulnerabilities+put+asterisk+telephone+systems+risk/ -- Aaron Daniel Computer Systems Technician Sam Houston State University amdtech@shsu.edu (936) 294-4198

Running slackware 9.1 with compiled kernel from source 2.6.5 running ok. I have 2 HFC-S chipbased Billion Bipac PCI ISDN BRI cards installed in PC. Would like to use one card as in TE and one in NT mode. System works fine running pbx4linux.But want to use SIP functionality, so I would like to try out the Asterisk. Trying to install the bri-stuff.0.0.2.tar.gz (May 10 2004)package, getting the

Just idly watching * in console mode and saw that someone from 50.49.54.102 tried to register with my *. whois gives:- OrgName: Internet Assigned Numbers Authority OrgID: IANA Address: 4676 Admiralty Way, Suite 330 City: Marina del Rey StateProv: CA PostalCode: 90292-6695 Country: US NetRange: 50.0.0.0 - 50.255.255.255 CIDR: 50.0.0.0/8 NetName: RESERVED-50

Hi, Why does my asterisk keep forking instances at random times everyday? When I do ps aux, I got this: asterisk 13068 2.2 5.1 25924 12276 ? Sl 06:00 13:18 asterisk -vvvg -c asterisk 23558 0.0 5.1 26040 12248 ? S 09:57 0:00 asterisk -vvvg -c asterisk 29832 0.0 5.1 25924 12208 ? S 11:48 0:00 asterisk -vvvg -c asterisk 31872 0.0 5.1 25924 12208 ? S

Hello, I'm writing because we have problems with an asterisk installation (Trixbox ver. 1.2.3). We have a customer which is receiving a lot o telephony traffic (more or less 1 call/2 min.); we are using a TDM400 board, with 3 PSTN lines configured and we have two big issues: - Calls are dropped during conversation (I have a busycount=8 from the initial value that was 4) -

I just setup an Asterisk system on a small Shuttle box; I am only using SIP channels and have no FXO/FXS cards. The system works fine in that I can call my inbound number (Broadvoice) and have the system answer and I can make outgoing calls. The problem is that every time I want to change something in the sip.conf file, I have to do a 'restart now' instead of a 'reload' or

All, Currently I've got my Asterisk machine running smoothly on IP bases. Meaning I can reach all phones or softphones within my LAN or remote LAN's via VPN. The next step for me is connecting it to the PSTN network. After some tweaking with the modem.conf I got the i4l driver running correctly, and it appears that my Fritz! ISDN v2 card is working correctly. I have added the

Lets talk about SIP and IAX2 1. The good and bad of both 2. What is the better one and why 3. and any other information that maybe use full -- Best regards, Al Bochter Bochter Services (Voip PBX) Toll Free: 866-638-1254 EXT: 250 (Voip PBX) Free World DialUp: 780217 EXT: 250 (Voip) Cellular: 712-432-5401 http://www.BochterServices.com/?t=Email BUY and sell Coins, Silver and Gold

Hello, I just compiled and started Asterisk 1.0.2 following "Getting Started With Asterisk Version 0.1a" from http://www.automated.it/guidetoasterisk.htm I made only one change to default config files - I changed from using oss to alsa. I don't have any devices so far. I started asterisk from the command line: # asterisk -vc and I got this warning (this was also before I

it appears the cvs for zaptel as of 12/13/04 am is missing at least 1 file -- wcfxs.c greg Regards Greg Cirino ___________________________________ Cirelle Enterprises Inc. 603-425-2221 www.cirelle.com Web Application Development & Design www.cirelle.net ProSpeed High Speed Dial-up - 6 Times Faster www.cedata.com Web, FTP, Email Hosting Services www.mlsbot.com NNEREN MLS IDX Services When